• The Korean Journal of Rehabilitation Nursing
• /
• v.12 no.1
• /
• pp.16-29
• /
• 2009

Purpose: The aim of this study was to develop and to analyze the duty and the task of rehabilitation nurse in Korea. Method: The definition of rehabilitation nurse and job description was developed based on developing curriculum(DACUM) by panels who have experienced in DACUM analysis and rehabilitation nursing. 228 nurses who were working at rehabilitation centers and rehabilitation unit in general hospitals were participated. The questionnaire included frequency, importance, and difficulty of duties and tasks. The data were collected in March and April 2009, analyzed by descriptive statistics. Results: The job description of rehabilitation nurse in Korea revealed 11 duties, and 61 tasks. On the all 11 duties, the highest duty in frequency and importance was direct nursing care ($2.47{\pm}.31$, $2.77{\pm}2.8$) and the highest duty in difficulty was self-development ($2.39{\pm}.48$). Among the tasks of duties 'direct nursing care' in 'manage medication' ($2.87{\pm}.35$) in frequency, the task 'prevent and manage bedsore' ($2.91{\pm}.31$) of duty 'direct nursing care' in importance, and 'cope emergency situations' ($2.72{\pm}.49$) of duty direct nursing care in difficulty showed the highest degree. Conclusion: The political efforts for the legislation of role and task of rehabilitation nurse were needed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1273-1277
• /
• 2011

This paper proposes a control-based approach for duty cycle adaptation in wireless sensor networks. The proposed method, QCon, controls duty cycle through queue management in order to achieve high performance under variable traffic rates. To minimize energy consumption while meeting delay requirement, we design a feedback controller, which adapts the sleeping time according to dynamically changing traffic by constraining the queue length at a predetermined value. Based on control theory, we analyze the adaptive behavior of QCon and derive conditions for system stability. Results from asymptotic analysis and simulations indicate that QCon outperforms existing scheduling protocol by achieving more energy savings while satisfying delay requirement.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.103-106
• /
• 2001

In this paper, a soft switching half-bridge converter using secondary switches for output control and conduction loss reduction is proposed. The conventional half-bridge converter must be fixed on duty cycle for soft switching. The proposed converter was consisted of two added switches in series of the secondary rectifier diodes. The main switches with constant duty cycle are operated ZVS. The secondary switches are operated ZV-ZCS. Especially, the primary switches were fixed duty cycle for maximum voltage conversion ratio. Output of converter is controlled by duty cycle or phase-shifted time of secondary switches. The conduction loss of the proposed converter can be reduced by the secondary switches. The operation characteristic, analysis, simulation and experimental results of the proposed converter are presented.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.45-55
• /
• 2023

This paper calls attention to the central problem of the influence of identifying the determinants of airport duty-free store customers perceived innovativeness, pursuit benefits and value-congruency on the behavioral intention. The data is completed with 307 adults with purchasing experience of airport duty-free store O2O integration service which brings sufficient convenience to consumers. The content analysis results show that the influence factors of innovation characteristics, consumer pursuit benefits and value-congruency affect the behavioral intention in various aspects. The result suggests that we should upgrade the innovate functionality and improve the service quality based on consumer needs. Finally, this study discusses implications for theory and practice, indicates limitations, and concludes with some suggestions for future research.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Purpose : External markers respiratory movement measuring device (RPM; Real-time Position Management, Varian Medical System, USA) Liver Cancer Radiation Therapy Respiratory gated with respiratory signal with irradiation time and the actual research by analyzing the respiratory phase with the breathing motion measurement device respiratory tuning evaluate the accuracy of radiation therapy Materials and Methods : May-September 2014 Novalis Tx. (Varian Medical System, USA) and liver cancer radiotherapy using respiratory gated RPM (Duty Cycle 20%, Gating window 40% ~ 60%) of 16 patients who underwent total when recording the analyzed respiratory movement. After the breathing motion of the external markers recorded on the RPM was reconstructed by breathing through the acts phase analysis, for Beam-on Time and Duty Cycle recorded by using the reconstructed phase breathing breathing with RPM gated the prediction accuracy of the radiation treatment analysis and analyzed the correlation between prediction accuracy and Duty Cycle in accordance with the reproducibility of the respiratory movement. Results : Treatment of 16 patients with respiratory cycle during the actual treatment plan was analyzed with an average difference -0.03 seconds (range -0.50 seconds to 0.09 seconds) could not be confirmed statistically significant difference between the two breathing (p = 0.472). The average respiratory period when treatment is 4.02 sec (${\pm}0.71sec$), the average value of the respiratory cycle of the treatment was characterized by a standard deviation 7.43% (range 2.57 to 19.20%). Duty Cycle is that the actual average 16.05% (range 13.78 to 17.41%), average 56.05 got through the acts of the show and then analyzed% (range 39.23 to 75.10%) is planned in respiratory research phase (40% to 60%) in was confirmed. The investigation on the correlation between the ratio Duty Cycle and planned respiratory phase and the standard deviation of the respiratory cycle was analyzed in each -0.156 (p = 0.282) and -0.385 (p = 0.070). Conclusion : This study is to analyze the acts after the breathing motion of the external markers recorded during the actual treatment was confirmed in a reproducible ratios of actual treatment of breathing motion during treatment, and Duty Cycle, planned respiratory gated window. Minimizing an error of the treatment plan using 4DCT and enhance the respiratory training and respiratory signal monitoring for effective treatment it is determined to be necessary.

• Architectural research
• /
• v.12 no.2
• /
• pp.53-62
• /
• 2010

The purpose of this study is to examine design preferences for the sales spaces of duty-free shops (DFSs) by conducting image evaluations. The results will help improve quality by influencing designs for the construction, extension or remodeling of these shops. An image measurement method, the semantic differential method, was used to measure cognitive structure using photos of shops. Photos were collected of the DFS at Jeju Island, as well as photos of brand stores designed by architects. Two sets of 16 photos (32 different photos in all) were selected according to photo classification standards and design concepts, both decided by reviewing previous studies and related materials. The evaluation and survey were done by two sets of subjects: sales employees, who have experience and special knowledge of the evaluation of sales space; and students majoring in architecture. To strengthen the evaluation results, I conducted a preliminary survey and a main survey, verifying and complementing findings. 116 surveys were conducted, of which 14 were of poor quality and rejected, leaving and 102 to be analyzed. The collected surveys were statistically analyzed, using SPSS 12.0 for Windows. Reliability, image profile, factor and multi-dimensional scaling analyses were conducted. As a result, image evaluation structure and characteristics were obtained for sales spaces of DFSs, confirming the difference between them and other spaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.437-443
• /
• 1998

Automobile company tries to reduce the inertia of powertrain to increase the fuel efficiency and increase the engine power every year to make the high speed driving possible at full load condition. These cause the torsional vibration of powertrain. But the demand about ride comfort improvement is increased constantly, so torsional vibration of powertrain become an emergency problem to be cured. This study is a basic research to reduce the torsional vibration of powertrain at driving condition. First, the heavy duty powertrain is characterized as a vibrating system. Its natural frequencies and mode shapes are reviewed. Second, by comparison of simulation results and experiment results, validity of developed model is verified. Finally, the couterplan which can reduce the torsional vibration by mode analysis and parameter modification is suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.80-89
• /
• 1997

Die sinking electrical discharge machining(EDM) was conducted for ceramic composite of 33 weight percent TiC based on AI$_{2}$O$_{3}$ ceramic matrix according to the change of current and duty factor(DF). Material removal rate(MRR) was increased as the current and the duty factor increased, but better surface mor-pholoty was obtained in the region of lower current and duty factor. From the scanning electron microscopy(SEM) photographs and the energy dispersive X-ray spectroscopy(EDX) of the EDMed surface, EDM trace formed by one discharge spark was analyzed. Although the bending strength after EDM was highly decreased, reliability obtained by weibull analysis was increased twice. The bending strength was recovered or more by barrel polishing after EDM. From the FEM analysis of temperature for one spark, the possible melting region of AI$_{2}$O$_{3}$and TiC was obtained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.42-47
• /
• 2014

The use of BLDC motor in Vehicle and industrial field, it is operated by continuous and intermittent driving. When the intermittent driving is occurred by the rise and fall of temperature repeatedly, it was represented by different characteristics in case of continuous driving. So, it is very important that heat source estimation according to the duty ratio. In this paper, temperature characteristics according to the operating method of BLDCM was calculated by using the thermal equivalent circuit, and the validity of the study was demonstrated as compared to the calculated and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.59-67
• /
• 2023

This paper explores the variation of DC-Link current ripple analysis in terms of duty cycle and phase angle of Multi-phase/Multi-stage boost converter. A 2-Stage/1-Stage boost converter DC-Link current is used to determine the difference between the 1st stage diode current and the 2nd stage inductor current. Each stage boost converter diode and inductor current is subordinate to the phase angle and duty cycle. The magnitude of the ripple current is variable according to phase angle and duty cycle. The analysis results are verified by variation of DC-Link current ripple using a 1kW typical 2-stage/1-stage boost converter.