• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.561-569
• /
• 2012

Study attempts to evaluate the environmental cost and benefit for management of particulate matters of Donghae harbor in Gangwondo. The level of fine dust suspended in the vicinity of the harbor was quite high, exceeding the national standard ($100{\mu}g/m^3$) depending on the places. The test field harbor deals with lots of limestone and coal, so that fine particulates could be generated while loading it and unloading. It was estimated that the direct handling of cargos might produce 12 tons of PM10(Particulate Matters of $10{\mu}m$) a year. In addition, heavy vehicles for transportation of various cargos including raw materials emit huge amount of diesel soots and cause to redispersion of road dust. The local government spends more than 2 billion won every year, and it contributes to reduce the atmospheric dust. According to the prediction of cost to benefit, it will present the effectiveness in 720 % maximum and at least 240 %.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.255-256
• /
• 2002

포장도로에서의 자동차 운행으로 인한 비산먼지(fugitive dust)와 곳곳에 산재한 건설현장에서의 비산 먼지가 도시ㆍ산단지역의 미세먼지 배출량에 가장 큰 기여를 하고 있는 것으로 알려지고 있다. 국내의 경우 비산먼지의 기여도가 연소과정에서 발생하는 미세먼지(유류보일러, 자동차, 기타 산업공정)보다 많게는 10배 가량 큰 것으로 조사되었다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.312-313
• /
• 2002

도로에서의 비산먼지는 건설현장 트럭에 의한 토사의 유입, 운반 중에 날리는 토사, 토양의 침식, 겨울철 모래살포, 타이어의 마모 등에 의하여 도로표면에 쌓인 먼지가 차량의 운행이나 바람으로 인하여 발생한다. 국내 주요도시 및 산업단지는 대부분이 포장도로로서 주변환경에서 유입되는 먼지와 함께 차량의 운행으로 인한 비산먼지(Fugitive dust)의 영향이 지대하며, 건설현장에서 발생되는 비산먼지와 함께 도시·산단지역의 미세먼지 배출량에 큰 기여를 하는 것으로 조사되었다. (중략)

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.212-221
• /
• 1999

Mechanical properties of polypropylene filled with recycled rubber dusts obtained from the buffing process in sport shoe sole manufacture were investigated. The use of these dusts eliminates the need for the size reduction process which is usually employed in rubber recycling. Two different waxes, polypropylene wax and ethylene vinyl acetate wax, were used in the PP/rubber dust compound. Two different processes, extrusion and injection moulding, were used to study the influence of the blends on the properties. The waxes gave significant improvement in the shaping of the extrudate. It was found that the impact strength of the injection moulded samples were higher than the extruded samples and the virgin PP. The tensile properties (yield stress and modulus) were dependent on the amount of rubber dust addition. An increase in the rubber dust loading gave lower yield stress and modulus.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.95-103
• /
• 2008

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.135-147
• /
• 2008

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.395-404
• /
• 2011

Asian dust evens took place in Seoul on 27~28 March and 31 March~1 April 2007, during which the mass and chemical compositions of $PM_{10}$ were measured at urban area in Seoul, Korea. In conjunction with $PM_{10}$ compositions, the behaviors of gas precursors such as CO, $O_3$, $SO_2$, and $NO_2$ and meteorological parameters and air mass trajectories were thoroughly examined. The earlier case was a weak dust incidence which was characterized by elevated concentrations of CO, $SO_2$ and $NO_2$ as well as secondary aerosols. In contrast, the later showed the trait of the dust aerosols associated with high $PM_{10}$ mass and $Ca^{2+}$ concentrations. In general, the fractions of ionic species against mass decreased with increase in dust loading. The ratios of ${SO_4}^{2-}$ to ${NO_3}^-$ and $SO_2$ to $NO_2$ were similar in temporal variations, suggesting the concentrations of secondary aerosols were sensitive to the level of precursor gases. In this study, $Na^+$ and $Cl^-$ were also highly elevated during the heavy dust episode, which is thought to have originated from alkaline soils spreading through the northeast regions of China.

• Particle and aerosol research
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study is to assess respirable crystalline silica (RCS) exposure levels in workers who collect and dispose used coal briquette ash (CBA) in sanitation companies that are subcontracted by one medium-sized local government on the collection of municipal household waste (MHW), and to analyze the quartz content in CBA. When the CBA powder that undergone specialized pretreatment in several steps were subjected to mineral identification and quantitative analysis using X-ray diffraction (XRD), it was found that quartz represented 18%, and in addition, mullite, and plagioclase were included. For two CBA collectors, samples were collected by the personal sampling evaluation method. After respirable dust was collected in accordance with the National Institute for Occupational Safety and Health 7500 method, the concentration of quartz was analyzed using XRD. Meanwhile, a portable real-time dust monitor (Sidepak AM520, TSI Inc., USA) was also used to observe the dust exposure level for each time zone and job task. The RCS exposure level of one worker was as high as 0.024 mg/㎥, which was the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLV) level. The other worker also exhibited a concentration of 0.013 mg/㎥, which was more than half of TLV. The Sidepak results revealed that the work of collecting CBA and loading it onto a vehicle was hardly exposed to the dust of a significant level. It was found, however, that the work of transferring the collected CBA to a container through a conveyor belt was exposed to a very high average respirable dust concentration of 2.238 mg/㎥. The results of this study confirmed that quartz, which is crystalline silica and a carcinogen, is contained in CBA, one of municipal household waste (MHW), in high concentration. It was also confirmed that workers are exposed to high RCS concentrations while transferring collected CBA into a container. Although each local government in South Korea handles CBA in different ways, it is imperative to investigate the CBA exposure level of sanitation workers and improve their working conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.2 s.245
• /
• pp.95-100
• /
• 2006

Electrostatic precipitators(EPs) have low pressure drop and high dust collection efficiency and are widely used for industrial dust collectors. The current-voltage characteristics, which are important to maintain high dust collection efficiency, depend on several factor: discharge electrode shape, gas flow property, dust loading etc. In this study, experiments are performed to investigate the current-voltage characteristics of the corona discharge of various electrode geometries and an empirical model is proposed to predict current-voltage characteristics of the corona discharge. The corona onset voltage correction coefficient$(\alpha)$ and the geometry correction coefficient$(k_g)$ are used to the conventional equation for wire-plate type discharge electrode. The corona onset voltages are -6.3kV and almost constant when the numbers of discharge pins are varied from 3 to 9. The length of discharge pins has very sensitive effects on the corona onset voltage. They are increased from -6.3 to -7.8kV when the discharge pin length are 8.5 and 4.5mm, respectively. The empirical model shows good agreement with experimental results and can predict the effects of discharge pin length and number.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.568-570
• /
• 2009