• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.211-220
• /
• 2023

Background: Smartphone addiction has emerged as a significant social problem. Numerous studies have indicated the association between smartphone use and discomfort in the musculoskeletal system of the upper extremities. Objects: This cross-sectional survey aimed to compare the characteristics of musculoskeletal pain in the neck, trunk, and upper limbs between individuals with smartphone addiction and those without addiction. Methods: We collected a total of 326 healthy individuals' data from China and Korea who had owned and used smartphones for more than 5 years between 20-50s through an online questionnaire consisting of 84 questions in four major sections. The first part contained basic information on the participant's personal characteristics and smartphones. The second part contained questions about smartphone use and posture. The third part was the smartphone addiction. The fourth part was to investigate musculoskeletal pain in various upper body parts. Results: Smartphone addiction has a weak negative correlation with age (r = -0.20, p < 0.01) and a weak positive correlation with the hours of smartphone use (r = 0.376, p < 0.01). Frequent musculoskeletal pain symptoms related to smartphone use were observed in the neck, shoulder, lower back, and wrists. The hours of smartphone use was slightly positively associated with the prevalence of musculoskeletal pain in the shoulder (r = 0.162, p < 0.05) and lower back (r = 0.125, p < 0.05). The prevalence of musculoskeletal pain in the neck (χ² = 3.993, p < 0.05), shoulder (χ² = 6.465, p < 0.05), and wrist (χ² = 4.645, p < 0.05) was significantly higher among females than males. Conclusion: The results suggest that smartphone addiction should be recognized as a dual concern encompassing both physical health and psychosocial aspects. Furthermore, healthcare professionals, including physicians and physical therapists, should consider clients' smartphone usage patterns when assessing and treating with musculoskeletal pain.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.2
• /
• pp.5-9
• /
• 2023

The effect of La_0.7Sr_0.3MnO₃ (LSMO) addition on the superconducting property of Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_10+δ ((Bi, Pb)-2223) polycrystalline samples was studied. LSMO (0.3 wt.% to 2.0 wt.%) added (Bi, Pb)-2223 samples were prepared by using a solid-state reaction method. The XRD analyses show that as the LSMO addition increases, the volume fraction of the Bi-2223 phase is gradually decreased. The critical temperature (T_c) exhibits a gradual decrease with a single transition as the LSMO amount increases up to 1.0 wt.%, but a further addition of LSMO induces an abrupt decrease of T_c with a dual transition. The analyses on the local structure of the CuO₂ plane from the X-ray absorption fine structure (EXAFS) measurements showed that for the samples with low concentration of LSMO up to 1.0 wt.%, the Cu-O bond length and the CuO₂ plane ordering do not degrade from the values of pure (Bi, Pb)-2223, while they get worsen with a further increase of LSMO addition. These results open up the possibility of LSMO as artificial pinning centers of the (Bi, Pb)-2223 system for power application.

• Journal of English Language & Literature
• /
• v.55 no.1
• /
• pp.3-24
• /
• 2009

The Harry Potter series is considered to represent the multicultural aspect of contemporary British society and to show critical perspectives of racism. This series, however, also includes many elements of British imperialism. This paper examines the ideas about education and Harry's role in relation to British imperialism. One of the main ideas prevalent in 19th century British boys' public schools was that people's blood origin is the most important element in determining their characteristics, ability and moral qualities. The students' inherited capacity and their family background are more highly regarded than their secondary learning and training. This reflects a 19th century concept that ultimately, inborn quality makes 'a hero', a truth presented in the educational policies of Hogwarts. Hogwarts' educational policies and systems can also be related to 'developmentalism', which defines children as imperfect, in-progress and incomplete, thus needing proper training and discipline. As this concept functioned to justify the control of children while educating them, Hogwarts adopts diverse controlling devices and oppressive policies, which are mainly justified in the name of education. On the one hand, child characters are controlled and oppressed by the school authorities, on the other hand, some of the students such as Harry have remarkable magic powers enough to resist the adult authority and even to save the magic society from the evil power. Harry plays dual roles, which the British boys of the Empire were assigned from their society; they are important heirs to conquer the 'evil' or 'barbarous' world but need to be obedient to a 'good' authority to achieve the mission. Harry's magic power and self-discipline ultimately contribute to fulfilling Dumbledore's mission, which mirrors 19th century British boys' roles as the heirs of the British Empire.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.141-153
• /
• 2023

Recently, conflict management has emerged as a major issue. Among them, public conflicts that occur in the process of promotion public policies can have negative social effects, so it is very important to manage conflicts effectively. Therefore, this study aimed to examine the characteristics of public conflicts related to ports in order to lay the foundation for the smooth promotion of public policies related to ports. The significance of this study is that it collected and categorized conflict cases in the port sector through various channels to examine the characteristics of port-related conflicts more closely. The results of this study are summarized as follows. First, this study categorized port-related public conflicts by considering the characteristics of actors, life cycles, and issues, which confirmed that conflicts over ports have various issues. Second, we found that many port-related public conflicts have been resolved in a highly coercive manner. Third, it is necessary to explore non-coercive approaches to induce conflict resolution. Fourth, it is necessary to establish a dual system of proactive and reactive measures to manage port-related public conflicts.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.685-686
• /
• 2023

상수도관의 수질 및 부식도 검사에는 파이프에 손상을 입히지 않고 지속적인 방법이 필요하다. 초음파는 이를 만족하면서 상태를 확인할 수 있고 주파수가 높을수록 해상도가 좋아져 정밀한 측정이 가능하다는 장점이 있다. 이러한 특성을 이용해 상수도관 모니터링 시스템으로 초음파 기반의 Scanning Acoustic Microscopy(SAM)과 Convolutional Neural Network(CNN)을 사용하는 새로운 방법을 제안한다. 기존의 Non-Destructive Testing(NDT)방식의 단점을 보완하면서 더 높은 해상도로 상수도관을 점검하는 방식으로, SAM 을 이용하여 부식으로 인한 파이프 두께 변화와 부유물의 여부 및 수질을 동시에 감지하고 얻은 데이터를 CNN 으로 분석했다. CNN 의 높은 정확도 결과로 이 시스템의 파이프 부식도 및 수질 모니터링에 대한 적합성을 보여주었다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.2
• /
• pp.95-98
• /
• 2023

Purpose: The precision error of a bone density meter reflects the equipment and reproducibility of results by an examiner. Precision error values can be expressed as coefficient of variation (CV), CV%, and root mean square-SD (RMS-SD). The International Society for Clinical Densitometry (ISCD) currently recommends using RMS-SD as the precision error value. When a 95% confidence interval is applied, the least significant change (LSC) value is calculated by multiplying the precision error value by 2.77. Exceeding the LSC value reflects a significant difference in measured bone density. Therefore, the LSC value of a bone density equipment is an essential factor for accurately determining a patient's bone density. Accordingly, we aimed to calculate the LSC value of a bone density meter (Lunar iDXA, GE) and compare it with the value recommended by the ISCD. We also assessed whether the value measured by the iDXA equipment was below the LSC value recommended by ISCD. Material and Methods: The bone densities of the lumbar spine and thighs of 30 participants were measured twice, and the LSC values were calculated using the precision calculation tool provided by the ISCD (http://www.iscd.org). To check the reproducibility of the measurement, patients were asked to completely dismount from the equipment after the first measurement; the patient was then repositioned before proceeding with the second measurement. Results: The LSC values derived using the CV% values recommended by the ISCD were 5.3% for the lumbar spine and 5.0% for the thigh. The LSC values measured using our bone density equipment were 2.47% for the lumbar spine and 1.61% for the thigh. The LSC value using RMS-SD was 0.031 g/cm² for the lumbar spine and 0.017 g/cm² for the thigh. Conclusion: that the findings confirm that the CV% value measured using our bone density meter and the LSC value using RMS-SD were maintained very stably. This can be helpful for obtaining accurate measurements during bone density follow-up examinations.

• PNF and Movement
• /
• v.22 no.1
• /
• pp.129-137
• /
• 2024

Purpose: The aim of this study was to investigate and compare the risk factors focusing on the neck and lower back between general workers (GW) and mild intellectual disability workers (MIDW) in the automobile manufacturing industry. Methods: A total of 32 participants were required for this study design to achieve 80% power, 0.9 effect size, and an alpha level of 0.05. Each group consisted of 16 subjects, including GW and MIDW. Pain levels in the neck and lower back were measured for all participants using the visual analog scale (VAS). A dual digital inclinometer was used to measure the range of motion (ROM) in the neck and lower back three times, and the average was used for analysis. The independent t-test was used to compare between the wo groups. Cohen's d effect analysis was employed to determine the effect size. The significant level was set at 0.05. Results: In the MIDW, neck pain was significantly higher, and left cervical flexion was significantly decreased compared with the GW. There was no significant difference in lower back pain between the MIDW and GW. However, both lumbar flexion and extension, as well as lateral flexion, were significantly reduced in the MIDW compared with the GW. Conclusion: This study reveals that MIDW working in the automobile manufacturing industry have a greater risk of neck pain, limitation in left cervical flexion, and overall restriction in the ROM of the lower back compared with GW.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.293-306
• /
• 2024

Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.8-16
• /
• 2024

This study conducts numerical modeling and eigen-analysis of a rod-fastened rotor, which is mainly used in aircraft gas turbine engines in which multiple disks are in contact through curvic coupling. Nayak's theory is adopted to calculate surface parameters measured from the tooth profile of the curvic coupling gear. Surface parameters are important design parameters for predicting the stiffness between contact surfaces. Based on the calculated surface parameters, elastoplastic contact analysis is performed according to the interference between two surfaces based on the Greenwood-Williamson model. The equivalent bending stiffness is predicted based on the shape and elastoplastic contact stiffness of the curvic coupling. An equation of motion of the rod-fastened rotor, including the bending stiffness of the curvic coupling, is developed. Methods for applying the bending stiffness of a curvic coupling to the equation of motion and for modeling the equation of motion of a rotor that includes both inner and outer rotors are introduced. Rotordynamic analysis is performed through one-dimensional finite element analysis, and each element is modeled based on Timoshenko beam theory. Changes in bending stiffness and the resultant critical speed change in accordance with the rod fastening force are predicted, and the corresponding mode shapes are analyzed.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1289-1302
• /
• 2024

Objective: There is a strong relationship between the content of beneficial fatty acids in milk and milk fat metabolic activity in the mammary gland. To improve milk quality, it is therefore necessary to study fatty acid metabolism in bovine mammary gland tissue. In adipose tissue, peroxisome proliferator-activated receptor gamma (PPARG), the core transcription factor, regulates the fatty acid metabolism gene network and determines fatty acid deposition. However, its regulatory effects on mammary gland fatty acid metabolism during lactation have rarely been reported. Methods: Transcriptome sequencing was performed during the prelactation period and the peak lactation period to examine mRNA expression. The significant upregulation of PPARG drew our attention and led us to conduct further research. Results: According to bioinformatics prediction, dual-luciferase reporter system detection, real-time quantitative reverse transcription polymerase chain reaction and Western blotting, miR-130a and miR-130b could directly target PPARG and inhibit its expression. Furthermore, triglyceride and oil red O staining proved that miR-130a and miR-130b inhibited milk fat metabolism in bovine mammary epithelial cells (BMECs), while PPARG promoted this metabolism. In addition, we also found that the coexpression of miR-130a and miR-130b significantly enhanced their ability to regulate milk fat metabolism. Conclusion: In conclusion, our findings indicated that miR-130a and miR-130b could target and repress PPARG and that they also have a functional superposition effect. miR-130a and miR-130b seem to synergistically regulate lipid catabolism via the control of PPARG in BMECs. In the long-term, these findings might be helpful in developing practical means to improve high-quality milk.