• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.109-119
• /
• 2013

This paper presents the design of the Safety Programmable Logic Controller (SPLC) used in the Nuclear Power Plants, an analysis of a reliability for the SPLC using a markov model. The architecture of the SPLC is designed to have the multiple modular redundancy composed of the Dual Modular Redundancy(DMR) and the Triple Modular Redundancy(TMR). The operating system of the SPLC is designed to have the non-preemptive state based scheduler and the supervisory task managing the sequential scheduling, timing of tasks, diagnostic and security. The data communication of the SPLC is designed to have the deterministic state based protocol, and is designed to satisfy the effective transmission capacity of 20Mbps. Using Markov model, the reliability of SPLC is analyzed, and assessed. To have the reasonable reliability such as the mean time to failure (MTTF) more than 10,000 hours, the failure rate of each SPLC module should be less than $2{\times}10^{-5}$/hour. When the fault coverage factor (FCF) is increased by 0.1, the MTTF is improved by about 4 months, thus to enhance the MTTF effectively, it is needed that the diagnostic ability of each SPLC module should be strengthened. Also as the result of comparison the SPLC and the existing safety grade PLCs, the reliability and MTTF of SPLC is up to 1.6-times and up to 22,000 hours better than the existing PLCs.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.1
• /
• pp.89-101
• /
• 2001

The purpose of this study ins to verify the characteristic location of Byungyoung Castle, physical type, inside spatial organization, and the scheme of Byungyoung Castle. The study utilizes historic literature, ancient maps related to Byungyoung Castle, topographical and cadastral maps which were published under the rule of Japanese Imperialism Castle, topographical and cadastral maps which were published under the rule of Japanese Imperialism and the topographical maps which were made recently by National Geographic Institute with various scales. The methodology of the study is to interpret the contents from the historic literature on the site map. The methodology of the study is to interpret the contents from the historic literature on the site map. The result of the study is as follows; Byungyoung Castle does duty as a defensive base for the entire country and has a specific character of location that has the dual function of a mountain fortress for national defense and of a village fortress for the town. Byungyoung Castle has four gates on four sides and has a oval shape very close to a circular form. The road construction inside the castle is composed basically of a cross shape. Byungyoung is located in the northwest area of this major road system. The private houses that lie along the north-south road are build up at the core area of the lower level and the town market built up around the south gate becomes the heart of life for the people. Schematically, it has the same pattern as regular village fortress, in that the houses for the guests and the houses for the public office are arranged to the east and the west. It is considered that there is certain functional parallel between Byungyoug Castle and Ulsan castle because there are no facilities for sacrificial rites no institutional budding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.183-190
• /
• 2003

The explosion of the Internet has brought an acute need for efficient operation, which becomes to develop several technologies based on optical networks. By matching merging technology using wavelength multiplexing, an efficient administration with limited wavelength can provide scalability of network. The merging in optical layer has limitation of devices since the merging can not be performed in this layer. Hence the merging must be implemented in electronic layer. When the merging is implemented, the delay time would be increased in OXC (Optical Cross Connection), but the improvement of throughput rate will be expected in the process of explosive traffic due to reduction of optical channel supporting large bandwidth. In this thesis, we proposed an OXC of dual module having a merging function. We considered the optimum merging point with the largest in system performance and confirmed results using the simulation.

• Journal of Intelligence and Information Systems
• /
• v.9 no.3
• /
• pp.81-97
• /
• 2003

In this paper, we suggest a method of robust watermarking for protection of multimedia data using the wavelet transform and artificial neural network. for the purpose of implementation, we decompose a original image using wavelet transform at level 3. After we classify transformed coefficients of other subbands using neural network except fur the lowest subband LL$_3$, we apply a calculated threshold about chosen cluster as the biggest. We used binary logo watermarks to make sure that it is true or not on behalf of the Gaussian Random Vector. Besides, we tested a method of dual watermark insertion and extraction. For the purpose of implementation, we decompose a original image using wavelet transform at level 3. After we classify transformed coefficients of other subbands using neural network except for the lowest subband LL$_3$, we apply a above mentioned watermark insert method. In the experimental results, we found that it has a good quality and robust about many attacks.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.192-196
• /
• 1996

[ $1.06/1.32{\mu}m$ ] dual-wavelength medical laser was developed and preliminary clinical comparisons at these two wavelengths were performed for dental application. We could develop a compact laser system 1) by lasing two wavelengths from the same Nd:YAG rod, and 2) by introducing high-voltage switching power supply modules. Experiment on gingiva of pig jaw showed higher thermal damage at $1.32{\mu}m$. Depending on particular procedures, each wavelength has its own advantages and disadvantages. For cutting, however, using conical tips rather than bare fibers provided better results with low threshold of cutting energy and less surrounding thermal damage. Appling light-absorbing dye on target area appeared to induce more damage during laser irradiation. However, histological studies showed no significant difference whether dye was applied or not.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.1
• /
• pp.17-20
• /
• 2004

PTEN (phosphatase and tensin homolog) is a dual specific phosphatase antagonizing phosphoinositide 3-kinase activity, and has first been cloned as a tumor suppressor for glioma. Although the role of PTEN as a tumor suppressor has been well studied, little is known about signaling mechanisms regulating expression and/or activity of PTEN in the central nervous system. In this study, we investigated whether PTEN expression is regulated by sensory deprivation. P5 rat pups were unilaterally naris-closed, and olfactory bulbs were immunohistochemically analyzed with PTEN antibody at the $7^{th}$ day after naris closure. PTEN immunoreactivity was found to be down-regulated in both glomerular, external plexiform and subependymal cell layers, suggesting that odor deprivation signals down-regulate expression of PTEN in the olfactory bulb. To the best of our knowledge, this is the first report to suggest that PTEN expression is regulated by sensory deprivation signals in neonatal rats.

• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.5
• /
• pp.253-258
• /
• 2008

Somatostatin (SOM) is a widely distributed peptide in the central nervous system and exerts a variety of hormonal and neural actions. Although SOM is assumed to play an important role in spinal nociceptive processing, its exact function remains unclear. In fact, earlier pharmacological studies have provided results that support either a facilitatory or inhibitory role for SOM in nociception. In the current study, the effects of SOM were investigated using anesthetized cats. Specifically, the responses of rostrally projecting spinal dorsal horn neurons (RPSDH neurons) to different kinds of noxious stimuli (i.e., heat, mechanical and cold stimuli) and to the $A{\delta}$ -and C-fiber activation of the sciatic nerve were studied. Iontophoretically applied SOM suppressed the responses of RPSDH neurons to noxious heat and mechanical stimuli as well as to C-fiber activation. Conversely, it enhanced these responses to noxious cold stimulus and $A{\delta}$-fiber activation. In addition, SOM suppressed glutamate-evoked activities of RPSDH neurons. The effects of SOM were blocked by the SOM receptor antagonist cyclo-SOM. These findings suggest that SOM has a dual effect on the activities of RPSDH neurons; that is, facilitation and inhibition, depending on the modality of pain signaled through them and its action site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.952-962
• /
• 2015

In this study, multilayered rings with a large outer diameter have been developed using a hot ring rolling process. The ring rolling process has been analyzed by rigid plastic finite element analyses (FEA) using the AFDEX2D and AFDEX3D/HEXA/RING simulators, where the finite element meshes received severe plastic deformation are remeshed into a fine mesh-size using a dual-mesh system. According to the simulated results, the design variables of the multilayered rings were determined and real tests were conducted to check the validity of the simulation results. By adopting the hot ring rolling process, the input weight of raw materials was reduced by 40% against the conventional hot forging process and that the recovery rate was increased by 24%. The measurement of the averaged roundness was satisfied within 0.5 mm for both the inner and outer diameters. Moreover, the hot ring rolling processes yielded 1.49 Cpk for the outer-diameter and 0.84 Cpk 0.84 for the inner-diameter.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.107-114
• /
• 2010

For stable germline transformation, the promoter of Bombyx mori cytoplasmic actin gene (BmA3) has been used for ubiquitous expression of transgenes. So far, no strong promoter is available for ubiquitous expression in B. mori, excluding BmA3 promoter. To identify more powerful promoter than previously reported BmA3 promoter, we isolated 9 clones that show stronger signal compared to BmA3 by a dot blot hybridization. Among these 9 clones, we focused on one clone which has high amino acid homology (85%) with hypothetical protein 32 gene of Lonomia obliqua. This clone, named bHp32 (B. mori hypothetical protein 32) was ubiquitously expressed in all tissues and developmental stage of fifth instar B. mori larvae. As result of promoter assay using dual luciferase assay system, we found the highest transcription activity region (-1,200/+220) in the 5'-flanking region of bHp32 gene, which has 42-fold more intensive promoter activity than BmA3 promoter. Moreover, the bHp32 promoter was normally regulated in Bm5, Sf9, and S2 cells. Therefore, we suggest that bHp32 promoter may be used more powerful and effectively for transgene expression in various insects containing B. mori as a universal promoter.