• Health Policy and Management
• /
• v.10 no.4
• /
• pp.75-98
• /
• 2000

This study applied Data Envelopment Analysis(DEA) and Ratio Analysis and Regression Analysis to a set of Korean Public Corporation Medical Centers to evaluate their relative human resource efficiencies. The output measure used in this study was based on health insurance system which was used in both in-patient departments and out-patient departments. Inputs included working time of the doctors, nurses, technicians, and managerial department staff. Based on the data provided on the inputs and outputs, the analysis showed 23 of the 34 hospitals to be relatively inefficient. Each hospital with an efficiency rating of less than 1 was considered relatively inefficient. In addition, managerial strategies based on dual variables were constructed to indicate the manner In which inefficient hospitals may be made efficient. A subsequent analysis of t-test revealed that the bed occupancy rate, medical revenue per 100beds, value added revenue per staff, medical revenue per staff were statistically significant. The results of this study suggest the DEA is a promising tool for evaluating relative human resource efficiency in hospitals which have multiple inputs and outputs and where the efficient production function is not specifiable with any precision. But it is considered that efficiency evaluations may be most effective]y accomplished by Incorporating a combination of methodologies such as ratio analysis and regression analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.670-683
• /
• 2016

Network coding, as a new technique to improve the throughput, is studied combined with multi-relay model in this paper to address the challenges of long distance and power limit in deep space communication. First, an amplify-and-forward relaying approach based on analog network coding (AFNC) is proposed in multi-relay network to improve the capacity for deep space communication system, where multiple relays are introduced to overcome the long distance link loss. The design of amplification coefficients is mathematically formulated as the optimization problem of maximizing SNR under sum-power constraint over relays. Then for a dual-hop relay network with a single source, the optimal amplification coefficients are derived when the multiple relays introduce non-coherent noise. Through theoretic analysis and simulation, it is shown that our approach can achieve the maximum transmission rate and perform better over single link transmission for deep space communication.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.181-196
• /
• 1996

This study examined the time allocation pattern of farm wives. In particular it addressed i)the differences in extent of time spent in farming housework child care and leisure between on-farm and off-farm seasons ii)differences in the extent of time spent in such activities among farm wives and urban wives and iii) the determinants of time spent in such activities. To achieve these goals a system of time allocation equations based on household production theory was employed. On hundred and eight farm wives wiere selected in 1993 by the methods of judgement sampling and cluster sampling. Two major questions in the survey elicited sociodemographic information and time-use of farm wives using the time-diary method, The results indicate that farm wives different decisions about how to allocate their time to farming housework child care leisure during on-farm and off-farm seasons. In addition it was that farm wives are more likely to have dual responsibilities than are urban wives. Finally in the off-farm season education number of younger children and region were significant variables in explaining the time allocation decisions of farm wives. However only age was a significant factor in their time allocation decisions during the on-farm season. This leads one to conclude that time allocation is not a choice for farm wives in the on-farm season.

• Earthquakes and Structures
• /
• v.1 no.4
• /
• pp.391-410
• /
• 2010

There are several important considerations that need to be made in the capacity design of RC frame-wall structures. Capacity design forces will be affected by material overstrength, higher mode effects and secondary loadpaths associated with the 3-dimensional structural response. In this paper, the main issues are identified and different means of predicting capacity design forces are reviewed. In order to ensure that RC frame-wall structures perform well it is explained that the prediction of the peak shears and moments that develop in the walls is particularly important and unfortunately very challenging. Through examination of a number of case study structures it is shown that there are a number of serious limitations with capacity design procedures included in current codes. The basis and potential of alternative capacity design procedures available in the literature is reviewed, and a new simplified capacity design possibility is proposed. Comparison with the results of 200 NLTH analyses of frame-wall structures ranging from 4 to 20 storeys suggest that the new method is able to predict wall base shears and mid-height wall moments reliably. However, efforts are also made to highlight the uncertainty with capacity design procedures and emphasise the need for future research on the subject.

• Korean Journal of Materials Research
• /
• v.28 no.7
• /
• pp.376-380
• /
• 2018

Microalgae produce not only lipids for biodiesel production but also valuable biochemicals which are often accumulated under cellular stress mediated by certain chemicals. While the microcarriers for the application of drug delivery systems for animal cells are widely studied, their applications into microalgal research or biorefinery are rarely investigated. Here we develope dual-functional magnetic microcapsules which work not only as flocculants for microalgal harvesting but also potentially as microcarriers for the controlled release of target chemicals stimulating microalgae to enhance the accumulation of valuable chemicals. Magnetic microcapsules are synthesized by layer-by-layer(LbL) coating of PSS-PDDA on $Fe_3O_4$ nanoparticle-embedded $CaCO_3$ microparticles followed by removing $CaCO_3$ sacrificial templates. The positively charged magnetic microcapsules flocculate microalgae by electrostatic interaction which are sequentially collected by the magnetophoretic separation. The microcapsules with a polycationic outer layer provide efficient binding sites for negatively charged microalgae and by that means are further utilized as a chemical-delivery and flocculation system for microalgal research and biorefineries.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.592-603
• /
• 2015

In this paper, an optical implementation of a novel asymmetrical cryptosystem combined with D-H secret key sharing and triple DES is proposed. The proposed optical cryptosystem is realized by performing free-space interconnected optical logic operations such as AND, OR and XOR which are implemented in Mach-Zehnder type interferometer architecture. The advantage of the proposed optical architecture provides dual outputs simultaneously, and the encryption optical setup can be used as decryption optical setup only by changing the inputs of SLMs. The proposed cryptosystem can provide higher security strength than the conventional electronic algorithm, because the proposed method uses 2-D array data, which can increase the key length surprisingly and uses 3DES algorithm, which protects against “meet in the middle” attacks. Another advantage of the proposed asymmetrical cryptosystem is that it is free to change the user’s two private random numbers in generating the public keys at any time. Numerical simulation and performance analysis verify that the proposed asymmetric cryptosystem is effective and robust against attacks for the asymmetrical cipher system.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.17-30
• /
• 1999

This paper proposes a new stereophonic acoustic echo canceller to prevent impairments on the voice quality and to remove acoustic echo effectively appearing in stereo environment at the instant of abrupt change of the transmission room environment in teleconferencing system. In stereophonic acoustic echo canceller, the major defective problems are the large computational complexity of estimating echo path systems due to the long impulse response of the true echo paths and the performance degradation of echo canceller due to large correlation between dual stereo signals. Moreover, the change of the suboptimal solution for the echo canceller was considered as a critical deficient factor on to the performance of stereophonic echo canceller. To overcome these problems, this paper proposes pseudo stereophonic acoustic echo canceller using Hyper-plane projection algorithm, which shows the robustness to the environment change of the transmission room and the efficiency of computational complexity.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.87-89
• /
• 2018

본 논문에서는 양극성 직류 배전 시스템에 사용할 수 있는 절연형 3-레벨 전압 평형기를 제안한다. 전압 평형기는 양극성 부하에서 발생하는 불균등한 전압을 보상해주는 필수적인 전력변환장치이다. 제안하는 1단 구성의 절연형 전압 평형기는 오직 3-레벨 Dual Active Bridge DC-DC 컨버터로만 구성되고, 기존에 전압 벨런싱을 위해 사용되던 추가적인 비절연형 전압 평형기를 필요로 하지 않는다. 따라서 기존 비절연형 전압 평형기에 사용되는 수동 및 능동 소자를 제거함으로써 전력변환 장치의 전체적인 전력 밀도 및 전력 변환 효율을 향상시키는 장점을 가진다. 새롭게 제안하는 스위칭 방식을 통해 3-레벨 전압 평형기가 절연과 전압 벨런싱 기능을 동시에 수행한다. 3 kW급 전압 평형기의 시작품을 이용하여 제안하는 토폴로지와 제어 알고리즘의 성능과 타당성을 실험적으로 검증하였다.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.310-315
• /
• 2009

We report the fabrication of double clad fiber (DCF) and DCF coupler, suitable for fiber based imaging systems requiring the dual-channel transmission. Unlike the conventional DCF which uses silica for both cladding layers, the proposed DCF uses a low-index polymer for its outer-cladding layer coated over the conventional silica inner-cladding layer. The DCF is drawn with a conventional SMF preform but a low-index polymer coating is used for both jacket and outercladding of the fiber. To achieve the cladding mode coupling, a DCF coupler is fabricated by simply twisting two pieces of the proposed DCF after removing the polymer-coating at contacting regions. A cladding mode coupling ratio of 30% was achieved with a contact length of 16 cm. The proposed DCF and DCF coupler were employed in a composite optical coherence tomography (OCT) and fluorescence spectroscopy (FS) system, and both OCT images and FS signal from a plant tissue are measured simultaneously.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.17-22
• /
• 2007

Recent new packages such as MCP(Multi-Chip Package), QDP(Quadratic Die Package) and DDP(Dual Die Package) have stack type configuration. This kind of multi-layer package is thicker than single layer package. So there is need for the low height looping technology in wirebonder to make these packages thinner. There is stiff zone above ball in wirebonder wire which is called HAZ(Heat Affect Zone). When making low height loop (below $80\;{\mu}m$) with traditional forward loop, stiff wire in HAZ(Heat Affected Zone) above ball is bended and weakened. So the traditional forward looping method cannot be applied to low height loop. SSB(stand-off stitch) wire bonding method was applied to many packages which require very low loops. The drawback of SSB method is making frequent errors at making ball, neck damage above ball on lead and the weakness of ball bonding on lead. The alternative looping method is BNL(ball neckless) looping technology which is already applied to some package(DDP, QDP). The advantage of this method is faster in bonding process and making little errors in wire bonding compared with SSB method. This paper presents the result of BNL looping technology applied in assembly house and several issues related to low loop height consistence and BNL zone weakness.