• Journal of applied mathematics & informatics
• /
• v.23 no.1_2
• /
• pp.281-292
• /
• 2007

A pair of symmetric fractional variational programming problems is formulated over cones. Weak, strong, converse and self duality theorems are discussed under pseudoinvexity. Static symmetric dual fractional programs are included as special case and corresponding symmetric duality results are merely stated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.619-622
• /
• 2006

A printed Tee-type monopole antenna loaded by a pair of L-type slots is studied. The effects of position, width, and length of loaded slots on frequency bandwidth of the antenna are examined. As an examples, a compact dual band monopole antenna is designed for the ISM band $[2.4\sim2.48GHz,\;5.15\sim5.35GHz,\;and\;5.725\sim5.85GHz]$ use and the characteristics of the constructed antenna are studied experimentally.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.3
• /
• pp.283-288
• /
• 2013

This paper describes development of a high speed Doppler OFDI system for non-invasive vascular imaging. Doppler OFDI (optical frequency domain imaging) is one of the phase-resolved second generation OCT (optical coherence tomography) techniques for high resolution imaging of moving elements in biological tissues. To achieve a phase-resolved imaging, two temporally separated measurements are required. In a conventional Doppler OCT, a pair of massively oversampled successive A-lines is used to minimize de-correlation noise at the expense of significant imaging speed reduction. To minimize a de-correlation noise between targeted two measurements without suffering from significant imaging speed reduction, several methods have been developed such as an optimized scanning pattern and polarization multiplexed dual beam scanning. This research represent novel imaging technique using frequency multiplexed dual beam illumination to measure exactly same position with aimed time interval. Developed system has been verified using a tissue phantom and mouse vessel imaging.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3727-3732
• /
• 2013

The interaction between metalloporphyrins and diazine tautomers was investigated using quantum chemistry method. The results showed that the metal atom in the metalloporphyrin was not coplanar with porphin ring, and zinc porphyrin has the most extent of its non-coplanar nature. The most stable complex in nine complexes was iron porphyrin. NBO analysis indicated that the interaction between the lone pair of electrons on the nitrogen atom and the unoccupied lone pair orbital of metal contributes significantly to the stability of the complexes. Through the conceptual DFT parameter and Fukui dual descriptor, the thermodynamic stability and reactivity of complexes were analyzed. The density difference function (DDF) analyzes were performed to explore the rearrangement of electronic density after the coordination interaction. NICS calculation indicated that metalloporphyrin aromaticity was reduced after the coordination interaction, and aromaticity of diazine tautomer was increased along direction vector of the coordination interaction force.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.107-115
• /
• 1998

A multiplier bit-pair recoding technique derived from Booth algorithm is used as an effective method that can carry out a fast binary multiplication regardless of a sign of both multiplicand and multiplier. In this paper, we propose an implementation of an optical high-speed multiplier which consists of a symbolic substitution adder and an optical multiplication algorithm, which transforms and enhances the multiplier bit-pair recoding algorithm to be fit for optical characteristics. Specially, a symbolic substitution addition rules are coded with a dual-rail logic, and so the complement of the logic of the symbolic substitution adder is easily obtained with a shift operation because it is always present. We also construct the symbolic substitution system which makes superposition image by superimposing two shifted images in a serial connection and recognizes a reference image by feeding this superimposed image to a mask. Thus, the optical multiplier, which is compared with a typical system, is implemented to the smaller system by reducing the number of optical passive elements and the size of this system.

• Korean Journal of Plant Resources
• /
• v.30 no.6
• /
• pp.654-661
• /
• 2017

Dual-color fluorescence in situ hybridization karyotype analysis was created using repetitive sequences including two types of rDNA repeats (45S and 5S rDNAs) and Arabidopsis-type telomere sequence repeats. The somatic metaphase cells of Carthamus tinctorius were observed as diploids (2n=2x=24). A symmetrical or slightly asymmetrical karyotype with seven pairs of metacentric and five pairs of submetacentric chromosomes was observed. The lengths of the somatic metaphase chromosomes ranged from 4.18 to $6.53{\mu}m$, with a total length of $60.71{\mu}m$. One locus of 45S rDNA was located on the pericentromeric regions of three pairs of chromosomes and the other pair was situated on the terminal regions of the short arms of a single pair of chromosomes. One locus of 5S rDNA was detected on the interstitial regions of the short arms of two pairs of chromosomes. Arabidopsis-type telomeric repeats were detected on the terminal regions of all pairs of chromosomes. Co-localization of loci between telomeric repeats and 45S rDNA was observed in a single pair of chromosomes. The results provide additional information for the existing physical mapping project of C. tinctorius and will also serve as a benchmark to a more intricate cytogenetic investigation of C. tinctorius and its related species.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1604-1611
• /
• 2003

For dual­band operation, it can be done by loading two pair of slits in the equilateral­triangular patch, one embeded close to the side edges of the patch and the other inserted at the bottom edge of the patch. The frequency ratio of the two operating frequencies can be tuned by varing the positions and lengths of the inserted slots at the bottom edge of the patch. While the calculated frequency ratio of the antenna by Ensemble 5.0 is $1.66 ({f_10}=1.928GHz, {f_20}=3.2GHz)$, the measured one is 2.04 $({f_10}=1.6806 GHz, {f_20}=3.435 GHz)$. The error in the frequency ratio is due on the fabrication dimension and feeding position error as well as on the permittivity dispersion effect.

• Convergence Security Journal
• /
• v.15 no.3_1
• /
• pp.99-105
• /
• 2015

A typical SRAM-based PUF is used in random number generation and key exchange process. The generated out puts should be preserved, but the values are changed owing to the external environment. This paper presents a new D-PUF logic employing a dual anti-fuse OTP memory to the SRAM-based PUF. The proposed PUF can enhance the reliability of the logic since it can preserve the output values. First, we construct the OTP memory using an anti-fuse. After power up, a SRAM generates the random values owing to the mismatch of cross coupled inverter pair. The generated random values are programed in the proposed anti-fuse ROM. The values that were programed in the ROM at once will not be changed and returned. Thus, the outputs of the proposed D-PUF are not affected by the environment variable such as the operation voltage and temperature variation, etc. Consequently, the reliability of the proposed PUF will be enhanced owing to the proposed dual anti-fuse ROM. Therefore, the proposed D-PUF can be stably operated, in particular, without the powerful ECC in the external environment that are changed.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Structural Engineering and Mechanics
• /
• v.11 no.2
• /
• pp.171-184
• /
• 2001

A direct discrete formulation suitable for the nonlinear analysis of masonry structures is presented. The numerical approach requires a pair of dual meshes, one for describing displacement fields, one for imposing equilibrium. Forces and displacements are directly used (instead of having to resort to a model derived from a set of differential equations). Associated and nonassociated flow laws are dealt with within a complementarity framework. The main features of the method and of the relevant computer code are discussed. Numerical examples are presented, showing that the numerical approach is able to describe plastic strains, damage effects and crack patterns in masonry structures.