• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.497-499
• /
• 2013

본 논문에서는 단락형 스터브에 의해 구현되는 이중 모드 공진기의 전달 함수를 수식적으로 해석하여 임의의 공진 주파수를 만족하는 이중 모드 공진기의 전송 선로와 스터브의 전기적 길이 및 임피던스를 계산하였다. 계산된 결과에 의하면 전송 선로의 전기적 길이는 공진 주파수에 의해 결정되며, 스터브의 전기적 길이는 공진 주파수 및 선로와 스터브의 임피던스에 의해 결정된다. 또한, 이중 모드 공진기를 이용하여 필터를 설계하기 위해 필터의 리플 값에 따른 인버터의 크기를 계산하였다. 계산된 결과에 의해 스터브의 임피던스에 따른 인버터의 변화는 거의 없으며 전송 선로의 임피던스가 작을수록 인버터의 크기는 증가하고 필터의 대역폭이 클수록 인버터의 크기가 증가함을 확인하였다.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.102-110
• /
• 2016

In this paper, a high-frequency dual mode control LLC resonant converter with wide input voltage range is proposed through zero voltage switching (ZVS) under the universal line input voltage and every load conditions. Conventional small power adapter driving should be satisfied with universal line input voltage because it has no power factor correction circuit regulation. The conventional LLC resonant converter for an adapter can reduce the size of transformer in terms of high-frequency driving and ZVS. However, this converter has a disadvantage in terms of design of resonant tank under various input voltages because the frequency modulation range is very wide to satisfy voltage conversion gain. Compared with the conventional one, the proposed LLC converter can be adapted to universal line input voltage and high-frequency driving because it is controlled by pulse width modulation and pulse frequency modulation with control voltage. The validity of the proposed LLC converter is proved through the 60 W prototype.

• 멤브레인
• /
• 제2권2호
• /
• pp.129-134
• /
• 1992

Poly(n-butyl methacrylate)(PnBMA)에 의한 메탄가스의 용해도를 35atm의 압력까지 측정하였다. 용해도의 측정은 -$10^{\circ}$C 에서 30$^{\circ}$C까지의 온도범위에서 용적법에 의하여 실시하였다. PnBMA에 의한 메탄가스의 용해도는 유리 전이온도 이하에서 측정압력에 대하여 비선형으로 나타났으며, dual-mode sorption model로 만족스럽게 해석할 수 있었다. Langmuri capacity constant는 온도가 증가할수록 감소하였으며 유리전이온도 근처에서 영이 되며, 용해도 등온선은 유리 전이온도 이상에서는 직선으로 나타났다. Dual-mode sorption parameter의 온도 의존성도 고찰하였다.

• 한국정보전자통신기술학회논문지
• /
• 제8권2호
• /
• pp.128-132
• /
• 2015

논문은 이중 급전을 갖는 마이크로스트립 이중 모드 대역 통과 필터를 제안한다. 제안된 필터는 이중 모드 구현을 위해 모서리 부분을 제거되고, 직교 슬롯을 포함하는 정사각형 패치와 이중 급전 구조로 구성된다. 직교 슬롯은 공진기의 소형화 및 불요신호를 억압하기 위해 사용되고, 상측 차단 대역에서의 차단 특성을 개선하기 위해 이중 급전 구조를 사용하였다. 보다 자세한 필터 설계 방법 및 특성 결과를 본문에 기술하였다.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.243-249
• /
• 2021

In this paper, the sensing characteristics of a double cladding fiber (DCF) long-period fiber grating (LPFG) to the surrounding refractive index (SRI) are studied. The outer cladding of the DCF plays the role of the overlay, thus, the mode transition (MT) phenomenon of DCF can be induced by etching the outer cladding radius instead of coating overlays. The response characteristics of the effective refractive index (ERI) of the cladding mode to the outer cladding radius are analyzed. It is found that in the MT range, the change rate of ERIs of cladding modes is relatively larger than that for other ranges. Further, based on the features of the mode transition region (MTR), the phase-matching curve of the 11^th cladding mode is investigated, and the response of the DCF-LPFG to the SRI is characterized by the change of wavelength intervals between the dual peaks under different outer cladding radii. The numerical simulation results show that the SRI sensitivity is greatly improved, which is available to 3484.0 nm/RIU with the fitting degree 0.998 in the SRI range of 1.33-1.37. The proposed DCF-LPFG can provide new theoretical support for designing the DCF-LPFG refractive index sensor with excellent performances of sensitivity, linearity and structure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.802-809
• /
• 2014

This paper presents a dual-mode bias modulator (BM) for complementary metal oxide semiconductor (CMOS) power amplifiers (PAs). The BM includes a hybrid buck converter and a normal buck converter for an envelope tracking (ET) mode for high output power and for an average power tracking (APT) mode for low output power, respectively. The dual-mode BM and CMOS PA are designed using a $0.18-{\mu}m$ CMOS process for the 1.75 GHz band. For the 16-QAM LTE signal with a peak-to-average power ratio of 7.3 dB and a bandwidth of 5 MHz, the PA with the ET mode exhibited a poweradded efficiency (PAE) of 39.2%, an EVM of 4.8%, a gain of 19.0 dB, and an adjacent channel leakage power ratio of -30 dBc at an average output power of 22 dBm, while the stand-alone PA has a PAE of 8% lower at the same condition. The PA with APT mode has a PAE of 21.3%, which is an improvement of 13.4% from that of the stand-alone PA at an output power of 13 dBm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.805-807
• /
• 2004

Dual Mode technology has been developed as a new technology that allows to use a self-emissive display under full sunlight conditions. The new technology connects a LCD-like remissive operation mode in sunlight to an OLED-like self-emissive operation in the dark In the recent years, the focus of development has shifted towards the possibility of full colour operation.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.886-894
• /
• 2012

This paper presents a secondary-side, dual-mode feedback LLC resonant controller IC with dynamic PWM dimming for LED backlight units. In order to reduce the cost, master and slave outputs can be generated simultaneously with a single LLC resonant core based on dual-mode feedback topologies. Pulse Frequency Modulation (PFM) and Pulse Width Modulation (PWM) schemes are used for the master stage and slave stage, respectively. In order to guarantee the correct dual feedback operation, Phased-Locked Loop (PLL)-based automatic duty control circuit is proposed in this paper. The chip is fabricated using $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology, and the die size is $2.5mm{\times}2.5mm$. The frequency of the gate driver (GDA/GDB) in the clock generator ranges from 50 to 425 kHz. The current consumption of the LLC resonant controller IC is 40 mA for a 100 kHz operation frequency using a 15 V supply. The duty ratio of the slave stage can be controlled from 40% to 60% independent of the frequency of the master stage.

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.7-11
• /
• 2007

본 논문에서는 MMIC 응용을 위한 dielectric-supported air-gapped microstrip line (DAML) 구조를 이용하여 dual-mode stepped impedance 링 공진기를 설계 제작하였다. 링 공진기는 표면 마이크로머시닝 기술을 이용하여 만들어졌다. DAML ring resonator는 다층구조로써 공기중에 위치한 신호선과 MMIC 응용에 적합하도록 CPW가 한 평면에 구성되 있으며 DAML-CPW 트랜지션이 자유로운게 특징이다. DAML 링 공진기는 $10{\mu}m$ 높이로 GaAs 기판 으로부터 띄어져 있다. 대역통과 여파기는 dual-mode 공진을 하며 stepped impedance 이용한 구조이다. 측정결과로 중심주파수 97 GHz에선 감쇠특성은 15 dB, 삽입손실은 2.65 dB를 보였으며, 상대 대역폭은 12 %를 나타냈다. 이같은 구조의 대역통과 여파기는 MMIC 와의 직접화에 유리하다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1609-1618
• /
• 2015

DC microgrids are considered as prospective systems because of their easy connection of distributed energy resources (DERs) and electric vehicles (EVs), reduction of conversion loss between dc output sources and loads, lack of reactive power issues, etc. These features make them very suitable for future industrial and commercial buildings' power systems. In addition, the bipolar-type dc system structure is more popular, because it provides two voltage levels for different power converters and loads. To keep voltage balanced in such a dc system, a bidirectional dual buck-boost voltage balancer with direct coupling is introduced based on P-cell and N-cell concepts. This results in greatly enhanced system reliability thanks to no shoot-through problems and lower switching losses with the help of power MOSFETs. In order to increase system efficiency and reliability, a novel burst-mode control strategy is proposed for the dual buck-boost voltage balancer. The basic operating principle, the current relations, and a small-signal model of the voltage balancer are analyzed under the burst-mode control scheme in detail. Finally, simulation experiments are performed and a laboratory unit with a 5kW unbalanced ability is constructed to verify the viability of the bidirectional dual buck-boost voltage balancer under the proposed burst-mode control scheme in low-voltage bipolar-type dc microgrids.