• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.57-62
• /
• 2009

Purpose: Brain SPECT study is more sensitive to motion than other studies. Especially, when applying 1-day subtraction method for Diamox SPECT, it needs shorter study time in order to prevent reexamination. We were required to have new study condition and analysing method on dual detector system because triple head camera in Seoul National University Hospital is to be disposed. So we have tried to increase image quality and make the dual and triple head to have equivalent study time by using a new analysing program. Materials and Methods: Using IEC phantom, we estimated contrast, SNR and FWHM. In Hoffman 3D brain phantom which is similar with real brain, we were on the supposition that 5% of injected doses were distributed in brain tissue. To compare with existing FBP method, we used fan-beam collimator. And we applied 15 sec, 25 sec/frame for each SEPCT studies using LEHR and LEUHR. We used OSEM2D and Onco-flash3D reconstruction method and compared reconstruction methods between applied Gaussian post-filtering 5mm and not applied as well. Attenuation correction was applied by manual method. And we did Brain SPECT to patient injected 15 mCi of $^{99m}Tc$-HMPAO according to results of Phantom study. Lastly, technologist, MD, PhD estimated the results. Results: The study shows that reconstruction method by Flash3D is better than exiting FBP and OSEM2D when studied using IEC phantom. Flowing by estimation, when using Flash3D, both of 15 sec and 25 sec are needed postfiltering 5 mm. And 8 times are proper for subset 8 iteration in Flash3D. OSEM2D needs post-filtering. And it is proper that subset 4, iteration 8 times for 15sec and subset 8, iteration 12 times for 25sec. The study regarding to injected doses for a patient and study time, combination of input parameter-15 sec/frame, LEHR collimator, analysing program-Flash3D, subset 8, iteration 8times and Gaussian post-filtering 5mm is the most appropriate. On the other hands, it was not appropriate to apply LEUHR collimator to 1-day subtraction method of Diamox study because of lower sensitivity. Conclusions: We could prove that there was also an advantage of short study time effectiveness in Dual camera same as Triple gamma camera and get great result of alternation from existing fan-beam collimator to parallel collimator. In addition, resolution and contrast of new method was better than FBP method. And it could improve sensitivity and accuracy of image because lesser subjectivity was input than Metz filter of FBP. We expect better image quality and shorter study time of Brain SPECT on Dual detector system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1383-1388
• /
• 2013

Even though a dual lens stereoscopic camera allows for convenient stereoscopic photography, the necessity for the research comes up, since the dual lens stereoscopic camera can cause visual discomfort during zoom-in due to the fixed convergence point. We propose a method based on which a convergence point can be adjusted to prevent visual discomfort during zoom-in for a dual lens stereoscopic camera. First, the relational model is classified into nine kinds and defined, depending on locations of focus, object, and convergence point. And then, the method to minimize visual discomfort is suggested by adjusting convergence point on the given model. We also implement the suggested methods with anaglyph computer graphic and demonstrate the superiority of them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.456-459
• /
• 2013

Even though a dual lens stereoscopic camera allows for convenient stereoscopic photography, the necessity for the research comes up, since the dual lens stereoscopic camera can cause visual discomfort during zoom-in due to the fixed convergence point. We propose a method based on which a convergence point can be adjusted to prevent visual discomfort during zoom-in for a dual lens stereoscopic camera. First, the relational model is classified into nine kinds and defined, depending on locations of focus, object, and convergence point. And then, the method to minimize visual discomfort is suggested by adjusting convergence point on the given model. We also implement the suggested methods with anaglyph computer graphic and demonstrate the superiority of them.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1314-1319
• /
• 2017

A handheld sheet resistance meter that can easily and quickly measure the sheet resistance of indium tin oxide films was developed. The dual-configuration four-point probe method was adopted for this instrument, which measured sheet resistance in the range from $0.26{\Omega}/sq$. to $2.6k{\Omega}/sq$. with 0.3 % ~ 0.5 % uncertainty. The screen of the instrument displayed the sheet resistance when the probe was in contact with the sample surface and the value continued to be displayed during the probe contact. Even after separating the probe from the surface, the value was still displayed on the screen and could be read easily. A feature of the instrument was the use of the dual-configuration technique to reduce edge effects markedly compared with the single-configuration technique and its ease of operation without applying correction factors for sample size and thickness.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.5
• /
• pp.437-442
• /
• 2013

For open-end permanent magnet synchronous machine(PMSM) with dual inverter system, where one inverter is connected to the source and the other is flying, the dc link voltage of the flying inverter can be boosted through the machine. For this reason, when compared with single inverter drive system, higher voltage can be applied to PMSM, and higher torque can be generated in the flux weakening region. In this case, however, active and reactive powers are separately supplied by each inverter to maintain the dc link voltage of flying inverter. Therefore, the required flux weakening control is different from the conventional method for a single inverter drive system. This paper proposes the novel flux weakening control method which maximizes the active voltage component in a dual inverter PMSM drive system. The proposed method was demonstrated and verified through experimental results.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.413-414
• /
• 2014

This paper proposed an optimized design of a dual active bridge converter for a low-voltage charger. The dual active bridge converter among various bi-directional DC/DC converters is a high-efficiency isolated bi-directional converter. In the general design, when the battery voltage is high, the ZVS region is reduced. In contrast, when the battery voltage is low, the efficiency is low due to high conduction loss. In order to increase the ZVS region and the power conversion efficiency, depending on the battery voltage, variable switching frequency method is applied. At the same duty, the same power is obtained regardless of the battery voltage using the variable switching frequency method. The proposed method was applied to a 5kW prototype converter, and the experimental results were analyzed and verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.236-241
• /
• 2004

In this paper, the dual stage interaction between the coarse actuator and the fine actuator of an optical disk drive and the control method to enhance the track pull-in performance are discussed. First, the interaction analyses for the dual stage, and the experiments to find the each actuator dynamics are studied. From the experiments results, some physical parameters was derived, then, some simulations are performed to find the residual vibration effect of the fine actuator during seek motion. Second, the fine actuator control method to reduce the relative velocity, which is a key factor in track pull-in performance, between the target track and beam spot is proposed. From simulations, we show that fine actuator control which has same frequency and same phase of the disturbance is effective to reduce the relative velocity, hence, the control method is good approach in the track pull-in enhancement. Finally, the some comments are discussed briefly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.264-271
• /
• 1995

This paper presents the data parallel processing method between a PC and a micro-controller. To implement the method a dual port RAM for a real time data processing is used. In general an A/D & D/AC card is used to send or receive the data into or from the external plant and the PC does only the computation of the A/D and the D/A data because the A/D & D/AC card does not have the ability of computation. In this study, a data parallel processing method in which the PC and micro-controller own a common dual port RAM, is introduced, so that the PC can compute the A/D and D/A data and control the plant simultaneously. The PC system with a micro-controller and the common dual port RAM is designed and its effectiveness is investigated experimentally considering the performance of both the computation of data and the controlling and monitoring the external plant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.45-51
• /
• 2010

Traffic volume is essential data for traffic control or maintenance and rehabilitation planning. The volume especially with respect to the type of vehicles can facilitate to those road operations. In this research, a method for vehicle classification was developed using skewed sensors which can generate traffic signatures. In order to characterize vehicle types, the method investigates whether the second axle of each vehicle consists of dual tires. The presence of dual tire is determined by the discriminate function obtained from discriminant analysis. The validation using 1,878 vehicles recorded from a highway using a CCTV camera indicated significantly accurate results: 96.92% for class 1, 82.91% for class 3 and 79.13% for class 4.

• The Journal of Korea Robotics Society
• /
• v.19 no.3
• /
• pp.236-243
• /
• 2024

This paper introduces a dual manipulator system designed to automate the packaging process of industrial coils, which exhibit higher variability than other structured industrial fields due to diverse commercial requirements. The conventional solution involves the direct-teaching method, where an operator instructs the robot on a target configuration. However, this method has distinct limitations, such as low flexibility in dealing with varied sizes and safety concerns for the operators handling large products. In this sense, this paper proposes a two-step approach for coil packaging: motion planning and assembly execution. The motion planning includes a Rapidly-exploring Random Tree algorithm and a smoothing method, allowing the robot to reach the target configuration. In the assembly execution, the packaging is considered a peg-in-hole assembly. Unlike typical peg-in-hole assembly handling two workpieces, the packaging includes three workpieces (e.g., coil, inner ring, side plate). To address this assembly, the paper suggests a suitable strategy for dual manipulation. Finally, the validity of the proposed system is demonstrated through experiments with three different sizes of coils, replicating real-world packaging situations.