• 한국지반공학회논문집
• /
• 제28권3호
• /
• pp.55-66
• /
• 2012

본 연구에서는 포항지역의 자연사면에서 채취된 이암풍화토(CL)의 흡입응력 이력현상을 조사하기 위하여 자동 흙-함수특성곡선(SWCC) 측정장치를 이용하여 건조 및 습윤과정에 따른 모관흡수력과 체적함수비를 측정하였다. 시료에 모관흡수력을 재하시켜 간극수를 유출시키는 건조과정과 반대로 모관흡수력을 제하시켜 간극수를 유입시키는 습윤과정을 재현하였다. 측정결과를 토대로 van Genuchten(1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 산정한 결과 유효포화도에 따른 모관흡수력은 비선형적인 관계를 나타내며, 건조 및 습윤과정을 거치는 동안 동일한 유효포화도에서 다른 모관흡수력을 나타내는 이력현상(hysteresis)이 발생되었다. 그리고 Lu and Likos(2006)의 방법을 이용하여 흡입응력특성곡선(SSCC)을 산정한 결과 낮은 모관흡수력에서 흡입응력은 빠르게 증가하며 이후 미소하게 증가하는 것으로 나타났으며, 동일한 모관흡수력에서는 건조과정의 흡입응력이 습윤과정의 흡입응력보다 크게 나타내는 이력현상이 발생되었다. 따라서 불포화토의 특성을 고려하여 설계 및 안정성 검토를 수행하는 경우 강우침투시에는 습윤과정의 흡입응력특성곡선(SSCC)을 적용하고, 건조 혹은 배수시에는 건조과정의 흡입응력특성곡선(SSCC)을 적용하는 것이 바람직하다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.7-8
• /
• 2016

The use of half PC slab is increasing to shorten construction period. Because the drying shrinkage of topping concrete is restrained by PC slab, the tensile stress is generated at the topping concrete and the cracks can be occurred at the topping concrete due to drying shrinkage. Therefore, it is important to predict the tensile strain of half PC slab due to drying shrinkage to improve the quality of half PC slab. However, there is no studies on prediction of shrinkage behavior of half PC slab yet. Therefore, in this study, half PC slab was made, and the predictability of tensile strain generated at half PC slab due to drying shrinkage was investigated. The step by step method considering creep was used to estimate the tensile strain of half PC slab. In result, good agreement was obtained between the analytical and experimental values.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.367-374
• /
• 2019

시멘트 경화체에서 건조수축은 경화체내의 수분량이 감소하므로써 체적이 변화하게 되며, W/C가 높고 페이스트의 함유량이 많을수록 건조수축이 커진다고 알려져 있다. ECC의 경우, 굵은 골재를 포함하지 않기 때문에, 콘크리트에 비해서 더 많은 건조수축이 발생하게 된다. 만약, 양생중인 ECC에 구속이 작용할 경우, 일반 콘크리트 보다 큰 인장 응력이 발생하게 되며, ECC는 인장성능이 중요한 재료이므로 이러한 구속인장응력이 역학적 인장거동에 주는 영향을 고려해야 한다. 본 연구에서는 구속에 의해 발생한 응력이 ECC의 인장거동에 미치는 영향을 분석하고자 하였고, 구속여부를 달리하여 양생한 시험체에 직접인장 시험을 수행하여 역학적인 특성 변화를 관찰하였다. 그 결과, 구속응력에 따른 인장거동의 차이를 관찰하였고, 그 원인을 분석하였다.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.115-122
• /
• 2004

다공성 물질이 건조될 때 입자는 겔 상태의 그물망 구조를 갖는다. 따라서 건조공정 중 발생하는 잔류응력을 정확하게 해석하기 위해서는 공극률과 공극형상에 따른 물성을 알아야 한다. 본 연구에서는 균질화법으로 원형과 십자형의 공극을 갖는 미시적인 겔구조로부터 공극률에 따른 재료의 탄성특성을 예측하고. 다공성 세라믹 애자의 건조공정을 유한요소 해석하였다. 해석 결과, 변형 형상과 온도, 습도 분포는 공극을 고려하지 않은 해석과 유사하지만 잔류응력 값은 큰 차이가 있음을 알 수 있었다.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.435-448
• /
• 2008

Self-compacting concrete (SCC), characterized by the high flowability and resistance to segregation, is due to the high amount of paste (including cement and mineral admixtures) in contrast with normal concrete (NC). However, the high amount of paste will limit the volume fractions of coarse aggregate,and reduce the tendency of coarse aggregate to suppress drying shrinkage deformations. For this reason, SCC tends to produce higher values of drying shrinkage than NC for the most part. In order to assess the drying shrinkage of SCC quantitatively for application to offshore caisson foundations, the formulas presented in the literatures (ACI 209 and CEB-FIP) are used to predict the values of drying shrinkage in SCC according to the corresponding mix proportions. Additionally, a finite element (FE) model, which assumes concrete to be a homogeneous and isotropic material and follows the actual size and environmental conditions of the caisson, is utilized to simulate stress distribution situations and deformations in the SCC caisson resulting from the drying shrinkage. The probability of cracking and the behavior of drying shrinkage of the SCC caisson are drawn from the analytic results calculated by the FE model proposed in this paper.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.33-46
• /
• 2006

This study was carried out to investigate a radio-frequency/vacuum (RF/V) drying ability and physical properties of the green boards and the pre-kiln dried boards with 40 mm thickness, and the 70 mm-thick green board of Iroko (Milicia excelsa). The major results were summarized as follows; The drying time from initial moisture content (MC) of 110% to approximate 6% MC for a 40mm-thick green board was 192 hours, and about 200 hours for the 70 mm-thick green board, respectively and so the RF/V drying times were dramatically shortened compared to conventional kiln drying time. The case hardenings at the RF/V drying completion stage test were very negligible, thus represented almost no existence of the residual stress. The checks were very slightly formed on all of the boards during the RF/V drying test, but crook appeared quite severely. During the accelerating test, the water-resistant treated specimens had not experienced any signs of checking occurred, whereas the control boards had encountered very frequent occurrences of end checking and slight surface checking. There were no observations of warping and discoloring regardless of the treatment.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.337-343
• /
• 2015

Previous studies have shown that the drying shrinkage of recycled aggregate concrete (RAC) is greater than that of natural aggregate concrete (NAC). Drying shrinkage is the fundamental reason for the cracking of concrete, and tensile creep caused by the restraint of drying shrinkage plays a significant role in the cracking because it can relieve the tensile stress and results in the delay of cracking occurrence. However, up till now, all research has been focusing on the compressive creep of RAC. Therefore, in this study, a uniaxial restrained shrinkage cracking test was executed to investigate the tensile creep properties caused by the restraint of drying shrinkage of RAC. The mechanical properties, such as compressive strength, tensile splitting strength, and Young's modulus of RAC were also investigated in this study. The results confirmed that the tensile creep of RAC caused by the restraint of shrinkage was about 20-30 % larger than that of NAC.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.153-161
• /
• 1997

콘크리트가 외기에 노출되면 수분확산 현상으로 수분의 이동이 일어나고, 콘크리트 내부는 부등수분분포상태가 된다. 이러한 부등수분분포에 의하여 콘크리트 구조물에는 부등건조수축이 발생하며, 부등건조수축은 콘크리트 표면에 인장응력을 발생시키고, 표면균열의 원인이 되기도 한다. 또한 부등건조수축으로 인한 잔류응력은 현저한 크리이프의 영향을 받고, 이 때 각 위치에서 수분의 차이로 인하여 부등크리이프가 발생한다. 따라서 이 연구에서는 수분확산이론을 근거로 하여 콘크리트 내부의 수분분포를 합리적으로 예측할 수 있는 해석프로그램을 개발하였다. 그리고 콘크리트 내부의 각 위치에서 부등크리이프의 영향을 고려한 부등건조수축 해석방법을 제시하였다. 또한 콘크리트 내부의 각 위치에서의 부등건조수축 측정실험을 실시하여, 부등건조수축 해석방법의 타당성을 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.