Roll to Roll (R2R) is one of the most promising production technologies in the printed electronics such as OLEDs, e-paper, backplanes, RFID because this technology can save production cost and increase production speed. Printed electronics includes various processes such as printing, drying, winding, unwinding, and so on. In printed electronics R2R system, air-flotation oven is employed for drying process. Therefore, it is essential to introduce efficient and fast drying process when printing is finished. This paper considers the analysis of drying process in R2R that involves hot air flow. Air-flotation oven consists of non-contact supports and drying of coated web materials such as plastic films and paper. In this paper, experimental results and numerical analysis of pressure-pad air bar are investigated. The aerodynamic characteristics of pressure-pad air bar are numerically calculated using computational fluid dynamics (CFD) approach. Then the measured values of the aerodynamic forces for air bars are compared with those of CFD analysis.
This paper presents a linear model for heat transfer processes in the drying cylinders and the web in papar mill. The PDE model, functions include steam temperatures, wet temperatures, moisture constents, reel speed and basis weight were derived from operation data. The changes of wet temperatures and moisture contents in the drying cylinders and wets could be described. The Transfer function can be obtained through the state space model derived from the linearized PDE model. Stability of the drying cylinder model for paper plants and analysis of characteristics of process responses for changes in input variables are investigated.
Saccharomyces cerevisiae strain M. was cultured in a molasses-containing media with different amounts of phosphorous and nitrogen sources. The effects of constituents of the cell on the functional activity as well as sensitivity of it were investigated, the results obtained being summarised as follows : Both the thermotolerance and dry tolerance of the yeast cell were higher when the more carbohydrate and thehalose were present in the yeast cell. During the drying, the rate of dead cell was noted increasing and the fermentability decreasing, but it was more remarkable at early stage of the decreasing rate of drying, and at the same time increasing rate of dead cell and decrease of fermentability were more remarkable in the yeast cell containing much protein. In this case the speed of drying was slower. The trehalose content in the yeast cell increased during early stage of the drying and this increase was higher when content of trehalose and carbohydrate in the initial yeast cell was relatively high.
단(單)원통형 및 원통형 드럼건조기를 이용하여 잘게 저민 생선으로부터 플레이크를 성공적으로 만들 수 있었다. 생선의 높은 지방함량으로 인해 저민 생선이 드럼에 잘 들러붙지 않는 문제점은 타피오카가루의 형태로 2.5%의 전분을 저민 생선에 첨가함으로서 건조양상에는 영향을 미치지 않으면서 해결될 수 있었다. 제품의 수분함량을 일정한 수준으로 유지할 경우 건고형분(乾固形分)의 생산속도는 드럼간의 간격을 최소로 줄였을때 최고에 도달하였다. 건고형분(乾固形分)의 생산속도는 드럼의 회전속도가 증가할수록 선형적으로 증가하였고 제품의 품질이 손상되지 않는 범위에서 스팀의 압력이 높을수록 증가하였다. 총괄 열전달계수는 드럼의 회전수가 증가함에 따라 증가한 반면에 드럼간의 간격이 커짐에 따라 증가하지는 않았다. $MR\;=\;A\;\exp(\;-k{\theta})$로 표시되는 가장 보편적인 건조 모델식이 드럼건조에도 적용될 수 있었다.
녹용의 상품화를 위해서는 건조과정이 필요하다. 지금까지의 인공건조는 사육농가 스스로의 경험에 의한 건조가 대부분으로 이는 건조시설 및 건조방법의 미흡으로 비효율적이며, 건조 중 변질되거나 먼지, 세균 등에 오염되기 쉽다. 최근 선진국에서는 농산물의 고품질건조를 위한 다양한 건조방법들이 실용화되고 있으며 마이크로파를 이용한 건조방법도 그 중의 하나이다. 이러한 점에 착안한 본 연구에서는 우리가정에 널리 보급되어 있는 전자레인지를 이용한 녹용의 건조 가능성 여부를 검토하였으며 그 결과는 다음과 같다. 1. 녹용의 각질화 여부가 건조시간에 많은 영향을 끼치는 것으로 나타나, 건조시간과 건조소요에너지를 줄이기 위해서는 녹용을 부위별로 절편하여 건조시키는 것이 효과적인 것으로 나타났다. 2. 같은 건조시간에서도 템퍼링 시간의 길고 짧음에 따라 건조속도가 다르게 나타났으며, 각질화 진행 정도에 따라 템퍼링 시간의 조절이 필요한 것으로 판단된다. 3. 전자레인지를 이용한 녹용의 건조는 2분 건조 후 3분 템퍼링을 반복하는 것이 효과적인 것으로 나타났다. 4 본 실험결과 전자레인지의 마이크로파를 이용한 건조기술을 녹용 건조에 이용할 수 있을 것으로 생각된다. 5. 본 연구에서는 건조시간과 템퍼링 시간에 따른 건조만을 검토하였으나, 앞으로의 연구는 건조 후의 녹용의 성분변화 여부에 대한 검토가 필요한 것으로 사료된다.
본 연구에서는 하수슬러지를 효율적으로 건조시킬 수 있는 방법을 연구하고자 하였다. 슬러지 건조를 위해서는 슬러지 내 대부분의 함수율을 차지하고 있는 세포 내 함유수분을 제거시키는 것이 필요한데, 이에 대한 제거 장치로서 타격기류 건조장치를 적용하였으며, 직접 하수처리장에 파일롯 플랜트를 설치하여 실증실험을 실시하여, 이에 대한 운전특성과 적용가능성을 확인하고자 하였다. 주요 운전제어 변수는 슬러지 투입속도, 체인 회전속도, 공정온도 및 투입슬러지 함수율 변화 등이다. 체인의 회전속도가 증가할수록 생성슬러지 생성수율 증가 등 장치성능이 향상되었고, 공정온도가 상승함에 따라 건조효율이 증가하는 경향을 나타내었다. 투입슬러지 함수율은 60%일 때 생성슬러지 생성수율이 최대이고 함수율도 10% 내외를 나타내어 최적 조건임을 알 수 있었다. 슬러지 투입속도는 적정 투입속도 이상으로 투입 시, 생성슬러지 생산량은 증가하지 않는 반면, 오히려 잔류량만 증가하는 현상을 초래하였다. 위와 같은 실험결과로부터 장치의 최적 운전조건은 체인 회전수 1600rpm(최대속도), 최종 배출온도 $80^{\circ}C$, 투입슬러지 함수율 60%, 슬러지 투입속도 60kg/h이며, 이때 장치성능은 생성슬러지 생성수율 85.5%, 함수율 11.0%, 건조효율 81.7%으로 양호한 결과를 나타내었다.
The drying speed of gravure ink are very fast because of evaporation drying type. The gravure ink are fitly selected variety resin and solvent for a wide range printing are adopted. Moreover, after-manufacture handling is necessary to various purposes. Though composition of gravure ink are same those of another printing ink, the viscosity of it are vary low compare with another printing inks. As property of variety printed matters, improvement of performance of printing layer and suitable after-manufacture handling, the more research of gravure ink are to be continue for development of printing technology. Generally, the gravure ink are made up resin, pigment, solvent and additive. Especially solvent are fitly selected for solution of resin, viscosity, and drying speed. Furthermore, it tis care of bad smell of remaining resin, poison and danger of fire of it. Because of the prevention of air pollution as restriction deflation of solvent, custody of dangerous object and improvement of work environment as labor safety hygiene and fire-low, the environment restriction of printing business become strict. This study has purpose of development of gravure ink of involved 30% below of alcohol is used for PVC film printing.
하수 및 상수 처리장에서 발생되는 탈수케이크의 감량화와 재활용 가능한 물질로 생산하기 위한 방안으로 공기건조장치를 구축하였다. 80 m/sec의 공기속도와 30 $m^3/min$의 공기유량, 그리고 공기온도 $40^{\circ}C$로 운전되는 공기건조장치에 함수율 80 wt%이상의 탈수 케이크를 공급하여 건조하였다. 공기 건조장치는 Air Ejector에 의한 고속유동장과 사이클론에 의한 선회 유동장으로 구성되어 있는데, 투입된 탈수 케이크는 선회 유동장에서 1차 파쇄되고 선회 유동장에서 입자간의 충돌효과에 의해 성형되어 최종 구형의 건조분말을 생산한다. 함수율 82.5 wt%인 하수슬러지를 1.0 kg/min의 양으로 탈수 케이크를 공급하여 평균 함수율 62.3 wt%, 평균 입경 2.4 mm인 건조분말을 회수하였다. 이때 수분제거율은 0.1 $H_2O{\Delta}kg/min{\cdot}DS$ kg, 공기소모량은 170 $m^3/DS$ kg로 분석되었다. 동일 조건에서 상수 슬러지를 공기건조하였을 때 함수율은 47.5 wt%로 감소하였으며 평균 입경은 2.1 mm 그리고 수분 제거율은 $H_2O{\Delta}kg/min{\cdot}DS$ kg으로 증가하였으며 공기소모량은 180 $m^3/DS\;kg$로 증가하였다. 즉 본 기술은 하수 슬러지에 비하여 상수 슬러지의 탈수 케이크를 건조할 때 효율적이며 열을 가하지 않고 공기만으로 건조하여 수분을 감량시키기 때문에 경제적인 슬러지 처리 방법으로 평가된다.
Conventional dryer systems use one induction motor to drive drum and fan. However, nowadays, dryer systems are necessary to use extra fan motor for reducing a drying-time. This fan motor should be variable-speed controlled motor to control drying-time according to the volume of clothes. This paper proposes 3-phase SRM(Switched Reluctance Motor) having 12/8 structure for variable-speed fan motor of dryer system.
종자용 호밀의 탈곡시 정상 탈곡기회전속도의 기준을 설정하고자 출수후 40, 45, 50, 55, 60 일에 예취하고 예취하여 0, 1, 2, 3일간씩 포장에 깔아말린 다음 급동반경 18.6cm, 급치높이 6cm인 탈곡기로 각각 400 RPM에서 1000 RPM까지 100RPM간격으로 회전속도를 조절하며 탈곡하였으며 각 예취시기 및 탈곡직전에 종실의 수분함량을 조사하고 탈곡후 손상입률, 발아율 및 출현률을 조사하였다. 1. 호밀 종실의 수분함양은 출수후 40 일에 59.1%였고, 종실의 건물종이 최고에 달한 출수후 55일에는 36.3%였으며, 출수후 60일에는 20.1% 로 떨어 졌다. 2. 출수후 55 일에 예취하고 1∼2일 포장에 깔아 말린 후 500∼600RPM으로 탈곡하였을 때 손상립률 10% 이하, 발아율 90% 이상, 출현율 80% 이상인 충실한 종실을 얻을 수 있었다. 3. 탈곡종실의 손상립률과 발아율은 종실의 수분함량과 높은 상관이 있었다. 4. 탈곡기의 탈곡력은 급동의 회전속도의 제곱에 비례하고, 또 급동반경에 비례하므로 회전속도의 기준은 급동반경을 고려하여 설정함이 타당한 것으로 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.