• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.45-53
• /
• 1987

The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

• 산업식품공학
• /
• 제21권3호
• /
• pp.267-272
• /
• 2017

분산성을 높이기 위한 첨가물이 들어가지 않은 선식을 제조하기 위하여 유동형 과립기를 이용하여 분산성, 용해성, 침강성 등이 개선된 선식을 제조하였다. 선식입자는 200-325 mesh ($45-75{\mu}m$) 사이에 분포하여 미세한 분말로 구성되어 있었고 입도분석기를 이용하여 측정한 입도분포도는 $D_{50}$은 $86.2{\mu}m$, 용적평균입도($D_{4,3}$)는 $123{\mu}m$이었다. 선식제품을 유동층 과립기를 이용하여 내부온도 $40^{\circ}C$, 송풍량 $30-90m^3/h$, 시료량 300 g, 입구온도 $90^{\circ}C$, 분무압은 2.5 bar로 고정하고 바인더량과 과립시간, 건조시간의 조건을 조절하여 과립시료를 제조하였다. 과립시료는 과립화 시간과 건조시간을 합친 처리시간과 바인더로 사용한 증류수 양에 크게 영향을 받는 것으로 나타나 처리시간 20분, 바인더 양 45%일 경우에 원물에 비하여 분산성이 73.46%에서 92.25%로 증가하였고, 습윤시간은 5,000초에서 7초로 현저히 감소하였다. 입자의 침강에 의한 층 분리 현상과 침강성은 원물과 과립 시료에서 거의 차이를 보이지 않았으며 이러한 현상은 습식으로 측정한 용적평균입도($D_{4,3}$)가 원물과 과립시료가 거의 유사한 것으로 확인되어, 과립되었던 입자들이 분산 시에 단일 입자로 쉽게 붕괴되어 원물과 거의 유사한 부력과 침강성을 갖는 것으로 판단되었다. 결론적으로 유동형 과립기를 이용하여 분산성과 용해성이 개선된 선식제품의 생산이 가능하였다.

• 보존과학회지
• /
• 제37권2호
• /
• pp.135-143
• /
• 2021

목재 문화재의 결손부 보존처리는 동일 수종의 목분, 목재를 성형 후, 천연 접착제 또는 합성수지와 혼합하여 결실 부위를 충전하는 방식으로 접착한다. 그러나 대상의 종류와 상태에 따라 사용하는 접착제 및 첨가제의 농도, 혼합비율이 다양하게 나타난다. 이에 본 연구에서는 수피가 들뜨고 분리된 상태의 국립현대미술관 소장품을 대상으로 보존처리에 적합한 충전제 조건을 알아보기 위한 평가를 진행하였다. 건조속도, 수축·팽창률, 물리적 변형 정도를 기준으로 접착제별 최적 충전 조건을 선정하고, 실제 적용성을 확인하기 위해 해당 충전제들을 목재에 적용한 후 고습 환경에 노출하여 단면을 관찰하였다. 충전제는 아교, PVAc 접착제, Acryl 접착제 순으로 안정적인 적용 결과를 보였다. 결론적으로 수피가 들뜬 목제 조각품을 보존처리 시, 적합한 충전제는 아교와 목분 1 : 2 비율의 혼합물로 확인되었다. 이번 연구 결과를 통하여 목제 조각품의 들뜨고 분리된 수피를 안정화하는 적절한 방법을 제시하고, 향후 유사한 상태의 수피부 보존처리에 도움이 될 것으로 기대한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1251-1251
• /
• 2001

The routine analysis of milk chemical components is of major importance both for the management of animals in dairy farms and for quality control in dairy industries. NIRS technology is an analytical technique which greatly simplifies this routine. One of the most critical aspects in NIRS analysis of milk is sample preparation and analysis modes which should be fast and straightforward. An important difficulty when obtaining NIR spectra of milk is the high water content (80 to 90%) of this product, since water absorbs most of the infrared radiation, and, therefore, limits the accuracy of calibrating for other constituents. To avoid this problem, the DESIR system was set up. Other ways of radiation-sample interaction adapted for liquids or semi-liquids exist, which are practically instantaneous and with limited or null necessity of sample preparation: Transmission and Folded Transmission or Transflectance. The objective of the present work is to compare the precision and accuracy of milk calibration equations in two analysis modes: Reflectance (dry milk) and Folded Transmission (liquid milk). A FOSS-NIR Systems 6500 I spectrophotometer (400-2500 nm) provided with a spinning module was used. Two NIR spectroscopic methods for milk analysis were compared: a) folded transmission: liquid milk samples in a 0.1 pathlength sample cell (ref. IH-0345) and b) reflectance: dried milk samples in glass fibre filters placed in a standard ring cell. A set of 101 milk samples was used to develop the calibration equations, for the two NIR analysis modes, to predict casein, protein, fat and dry matter contents, and 48 milk samples to predict Somatic Cell Count (SCC). The calibrations obtained for protein, fat and dry matter have an excellent quantitative prediction power, since they present $r^2$ values higher than 0.9. The $r^2$ values are slightly lower for casein and SCC (0.88 and 0.89 respectively), but they still are sufficiently high. The accuracy of casein, protein and SCC equations is not affected by the analysis modes, since their ETVC values are very similar in reflectance and folded transmission (0.19% vs 0.21%; 0.16% vs 0.19% and 55.57% vs 53.11% respectively), Lower SECV values were obtained for the prediction of fat and dry matter with the folded transmission equations (0.14% and 0.25% respectively) compared to the results with the reflectance ones (0.43% and 0.34% respectively). In terms of accuracy and speed of analytical response, NIRS analysis of liquid milk is recommended (folded transmission), since the drying procedure takes 24 hours. However, both analysis modes offer satisfactory results.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.177-184
• /
• 2020

목적:본 연구의 목적은 절삭가공과 적층가공으로 제작한 의치상과 직접 첨상용 레진과의 인장결합강도를 열중합형 의치상과 직접 첨상용 레진의 인장 결합강도와 비교 및 평가하여 절삭가공과 적층가공으로 제작한 의치상의 직접 첨상을 임상에 활용하고자 하는 것이다. 재료 및 방법:열중합형 의치상 레진(Lucitone 199), 절삭가공용 의치상 레진(VITA VIONIC BASE), 적층가공용 의치상 레진(NextDent Base)을 이용해 가로 25 mm × 세로 25 mm × 높이 3 mm의 직육면체 형태로 제작하였다. 제작한 의치상 레진 시편을 30일간 37℃ 증류수에 보관한 뒤, 건조하여 자가중합형 polyethyl methacrylate (PEMA) 직접 첨상용 레진(REBASE II Normal)을 사용해 결합하였다. 절삭가공과 적층가공용 의치상 레진을 실험군으로, 열중합형 의치상 레진을 대조군으로 설정하고 각 군 당 10개의 시편을 제작하였다. 모든 시편을 24시간 동안 37℃ 증류수에 보관한 뒤 꺼내어 만능시험기를 이용해 10 mm/min의 cross head speed로 인장결합강도를 측정하였고, 파절 양상을 관찰하여 접착 파절, 응집 파절, 혼합 파절로 분류하였다. 의치상의 제작 방법에 따른 직접 첨상용 레진과의 인장결합강도를 일원배치 분산분석으로 분석하였고 사후검정(Bonferroni's method)을 시행하였다 (α= .05). 결과:절삭가공용 의치상 레진과 직접 첨상용 레진과의 인장결합강도(2.33 ± 0.39 MPa)는 열중합형 의치상과 직접 첨상용 레진과의 인장결합강도(2.45 ± 0.39 MPa)와 통계적으로 유의성 있는 차이가 없었다 (P > .999). 적층가공한 의치상 레진과 직접 첨상용 레진과의 인장결합강도(1.23 ± 0.36 MPa)는 나머지 두 군보다 유의성 있게 낮았다 (P < .001). 열중합형과 절삭가공한 의치상에서는 혼합 파절이 가장 많이 나타났으며, 적층가공한 의치상에서는 혼합 파절과 접착 파절이 동일한 빈도로 나타났다. 결론:직접 첨상용 레진과 다양한 방법으로 제작한 의치상의 인장결합강도를 비교하였을 때 적층가공으로 제작한 의치상은 절삭가공으로 제작한 의치상, 열중합형 의치상보다 유의하게 낮은 인장결합강도를 보였다.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• 한국식품영양과학회지
• /
• 제43권3호
• /
• pp.411-418
• /
• 2014

가시오가피(Acanthopanax senticosus)의 잎과 줄기를 천연물배지로 발효미생물인 영지버섯, 노루궁뎅이버섯 및 상황버섯균사체를 각각 최적조건으로 발효하여 3종의 가시오가피-버섯발효물인 가시오가피 영지버섯균사체 발효물, 가시오가피 노루궁뎅이버섯균사체 발효물, 가시오가피 상황버섯균사체 발효물을 얻었으며 이를 건강기능식품 소재로서 이용하고자 하였다. 우선적으로 배양용 시험관과 실험실용 배양병을 사용하여 버섯균사체별 가시오가피의 천연배지로서 최적혼합비율을 검토한 결과 영지버섯균사체, 노루궁뎅이버섯균사체 및 상황버섯균사체의 가시오가피 줄기와 잎의 혼합비율을 각각 80:20, 50:50, 50:50으로 확립하였으며, 이 조건을 가지고 산업용 배양포트(2,000 mL)에서의 최적배양시간을 검토한 결과 영지버섯균사체 14일, 노루궁뎅이버섯균사체 40일, 상황버섯균사체 30일로 확립하였다. 상기와 같이 최적화된 조건으로 배양된 3종의 가시오가피 버섯균사체 발효물들을 물과 70% 에탄올로 추출, 여과, 농축, 동결건조를 수행하여 가시오가피 버섯균사체 발효물 추출분말인 열수추출물(FM-5111, FM-5121, FM-5131)과 70% 에탄올추출물(FM-5112, FM-5122, FM-5132)을 얻었다. 이 가시오가피 버섯균사체 발효물 추출분말의 eleutheroside B와 eleutheroside E를 분석한 결과, eleutheroside B는 FM-5111 $0.050{\pm}0.003mg/g$, FM-5121 $0.067{\pm}0.001mg/g$, FM-5131 $0.026{\pm}0.001mg/g$, FM-5112 $0.038{\pm}0.002mg/g$, FM-5122 $0.053{\pm}0.005mg/g$, FM-5132 $0.025{\pm}0.001mg/g$의 함량을 나타내었고, eleutheroside E는 FM-5111 $0.052{\pm}0.014mg/g$, FM-5121 $0.047{\pm}0.003mg/g$, FM-5131 $0.078{\pm}0.003mg/g$, FM-5112 $0.045{\pm}0.002mg/g$, FM-5122 $0.040{\pm}0.002mg/g$, FM-5132 $0.080{\pm}0.011mg/g$의 함량을 보였으며, ${\beta}$-glucan의 경우 FM-5111 $4.47{\pm}0.14%$, FM-5121 $3.41{\pm}0.15%$, FM-5131 $4.15{\pm}0.06%$, FM-5112 $5.18{\pm}0.36%$, FM-5122 $3.74{\pm}0.40%$, FM-5132 $4.37{\pm}0.32%$의 함량이 측정되었다.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.