• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.27-33
• /
• 1991

Three kinds of specimens(radiata pine sapwood, radiata pine heartwood and whemlock heartwood) were dried at four temperature levels (30, 40, 50 and $60^{\circ}C$) in an emvironmental chamber. Unsteady-state diffusion coefficients were calculated from obtained drying fates by using infinite slab equation for first half of sorption and interval diffusion equation for second half of sorption. Activation energies for moisture diffusion in wood were calculated from the diffusion coefficients obtained at four temperatures. In most cases diffusion coefficients for radial movement were higher than those for tangential movement. Activation energy differences between sapwood and heartwood weren't significant for radial movement, but were significant for tangential movement. Most activation energies calculated from drying rates were lower than heat of water condensation(about 11,000cal/mole). Specially the avenge activation energy for sapwood tangential movement was only 5,000cal/mole.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.662-666
• /
• 2008

Electrochemical properties of carbon cryogel electrode for the application of composite electrode materials mixed with metal oxide in supercapacitor have been studied. Carbon cryogels were synthesized by sol-gel polycondensation of resorcinol with form aldehyde, followed by a freeze drying, and then pyrolysis in an inert atmosphere. Physical properties of carbon cryogel were characterized by BET, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that carbon cryogel is amorphous material. The electrochemical properties of carbon cryogel were measured by cyclic voltammetry as a function of concentration of liquid electrolyte, galvanostatic charge-discharge with different scan rates and electrochemical impedance measurements. The result of cyclic voltammetry indicated that the specific capacitance value of a carbon cryogel electrode was approximately 150.2 F/g (at 5 mV/s in 6M KOH electrolyte).

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.5-37
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable to bring large fire accidents and burn out human life and their properties. To diminish the fire disaster, fire retardant plywood has been required indeed. In the methods of manufacturing the fire retardant plywood the soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions, redrying of soaked plywood is the most important. In this study, 3.5mm thin and 5.0mm thick plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid and minalith, and water solution. 1-, 3-, 6-, and 9 hour-soaking treatments were applied and after treatments hot plate drying was applied to those treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$, of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1. The plywoods treated with ammonium sulfate, monoammonium phosphate and diammonium phosphate and diammonium phosphate showed increase of chemical absorption rate with proportion to increase of treating time, but not in case of the plywood treated with borax-boric acid and minalith. 2. In the treatment of definite time, the absorption rate per unit of volume of plywood showed higher in thin plywood (thickness of 3.5mm) than in thick plywood (thickness of 5.0mm). In both thin and thick plywoods, the highest absorption rate was observed in 9 hour-treatment of ammonium sulfate. The value was 1.353kg/$(30cm)^3$ in thin plywood and 1.356kg/$(30cm)^3$ in thick plywood. 3. The volume per weight of plywood after chemical treatment increased remarkably and. after hot plate drying, the values were to a little extent higher than before chemical treatment. 4. The swelling rates of thickness in chemical-treated plywoods increased similarly with that of water-treated plywood in 1- and 3 hour-treatment of both thin and thick plywoods. But in 6- and 9 hour-treatment, the greater increased value showed in water-treated ply wood than any other chemical, especially in thick plywood. 5. The shrinkage rates after hot plate drying showed the same tendency as the swelling rate, and the rate showed the increasing tendency with proportion to increase of treating time in thick plywood of both chemical and water treatments. 6. Among drying curves, the curves of water-treated plywood placed more highly than chemical-treated plywood without-relation to thickness in 6- and 9 hour-treatment except in 1- and 3 hour-treatment. 7. The drying rate related to thickness of treated plywood, was twice above in thin plywood compared with thick plywood. 8. The drying rate remarkably increased with proportion to increase of the plate temperature and, the values were respectively 1.226%/min., 6.540%/min., 25.752%/min. in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thin plywood and 0.550%/min., 2.490%/min, 8.187%/min, in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thick plywood. 9. In the treatment at $120^{\circ}C$ of hot plate temperature, the drying rates of chemical-treated plywood showed the highest value in monoammonium phosphate of thin plywood and in diammonium phosphate of thick plywood. But the drying rate of water-treated plywood was highest in 6- and 9 hour-treatment. 10. The fire retardant degree of chemical-treated plywood was higher than that of the untreated plywood as shown in loss of weight, burning time, flame-exhausted time and carbonized area. 11. The fire-retardant effect among fire retardant chemicals were the greatest in diammonium phosphate, the next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric and minalith.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.2
• /
• pp.47-56
• /
• 2008

The objective of this research is to evaluate the optimum recycling methods for the sewage sludge cakes at different microwave power-settings and for different periods of time. The dehydrated sewage sludge cakes used in this study was obtained from N wastewater treatment plan in the P City. The beginning drying processes were carried out in a microwave oven with 2,450 MHz frequency and power ranges of 1kW to 4 kW. The continuous conveyer drying system was also operated with 2,450 MHz frequency and power setting, ranging from of 1 kW to 6 kW. Initial moisture content of the sewage cake is 78~80%, and the moisture content decreased rapidly up to 0.2~2(wt%) within short periods due to breaking the cell walls. This study is also conducted to evaluate the characteristics of sewage sludge cakes with respect to important physical parameters effect on the thermal kinetics for evaporation water in the sludge which are operation times, moisture contents, drying rates, input amounts, flow rates and calorific values. It takes 60 minutes and 120 minutes to reach the critical moisture contents with power setting of 4 kW for 3kg/min and 6kg/min of the flow rates respectively. It takes 120 minutes and 110 minutes to reach the critical moisture contents with flow rates of 2.5 cm/min and sludge input of 6kg/min for the power settings of 4 kW and 6 kW respectively. The most effective value of the power for drying the sludge is 4 kW. Operation with 6kg/min and 4kW on 2cm of the sludge thickness can be effectively and inexpensively to reach the critical moisture contents, when you compare 2cm of the sludge thickness with 1cm and 3cm of the sludge thickness.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.805-813
• /
• 1994

Zucchini slices, sweet potato stems, taro stems, and platycodon treated with various methods such as dipping in citric acid solution, sulfite solution, or sulfur fumigation were dried by the natural sun drying method or the forced air drying method at 50, 70, 90, or $105^{\circ}C$. Mold growth of the dried vegetables and sensory quality of the dried and rehydrated vegetables were investigated. Limiting moisture contents to prevent mold growth over 3 month storage under room temperature were 15, 20, 25, and 15% for zucchini slices, sweet potato stems, taro stems, and platycodon, respectively. The chlorophyll containing vegetables dehydrated by the forced hot air showed better sensory quality than those by the natural sun. Among the pretreatments, dipping in the sulfite solution provided the best sensory quality to the dried vegetables. The sensory quality of dried platycodon was improved to a small extent by sulfur fumigation and sulfite solution treatment. The sensory quality of the dried platycodon was not found to be affected by the drying methods. All the tested vegetables dried at $105^{\circ}C$ had the worst sensory quality. Except drying temperature of $105^{\circ}C$, the lower the drying temperature, the better the sensory quality and the rehydration rates were obtained for the tested vegetables except platycodon. The sensory quality of the platycodon was little affected by the drying temperature tested in the range of $50{\sim}90^{\circ}C$.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.274-280
• /
• 2009

To survey the status of quality control of major ingredients of 'Ssanghwatang (Oriental medicine used for fatigue)', we analyzed 1,024 samples (9 kinds) of medical herbs to determine amounts of ashes, acid-insoluble ashes, loss on drying that are major elements to ensure basic quality of herbal drugstuffs. After ash analysis, Paeoniae Radix (from China) failed to meet the herbal standard criterion. After yielding Z-score(indicating the probability of exceeding its criterion) Zizyphi Fructus, Zingiberis Rhizoma, Paeoniae Radix, Rehmanniae Radix Preparata became objects of intense quality control (=IQC). Analysis on loss on drying shows Cinnamomi Cortex was unsuitable and was put under the IQC. In case of respective heavy metals, Angelicae Gigantis Radix, Cnidii Rhizoma, Cinnamomi Cortex exceeded the maximum permissible range for Cd. The 3 kinds of sub-standards were put to the IQC. Statistic figures showed a significant correlation (t-test, p<0.01) between country-of-origin and sub-quality rates. Compared to domestic one, imported medicinal herbs were less suitable in regard of acid-insoluble ash, loss on drying and Pb/Hg content. Meanwhile, amounts of Acid-insoluble ash showed positive relation with amounts of Pb (r=0.202) and As (r=0.243) among heavy metals leading to an inference that herbs of which root/rhizome is used for medical purposes attribute its high heavy metal content to the fine earth/sand being stuck to its root stalk.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.3
• /
• pp.153-159
• /
• 1990

To increase the solubility of fentiazac which is used widely as a non-steroidal antiinflammatory drug, its inclusion complex and suppositories were prepared and studied. Inclusion complexes of fentiazac with ${\beta}-cyclodertin$ $({\beta}-CyD)$ were prepared by four diffrent methods; coprecipitation method, kneading method, solvent evaporation method, freeze drying method. Suppositories of $fentiazac/{\beta}-CyD$ with PEG 1500 and Witepsol H-15 were prepared by solvent evaporation method and freeze drying method. Inclusion complex formation of fentiazac with ${\beta}-CyD$ was ascertained by powder X-ray diffractometry, differential scanning calorimetry and IR spectroscopy. The dissolution rate of fentiazac from the inclusion complex increased in distilled water and KP 2nd disintegration test fluids (pH 6.8) but extemly decreased in KP 1st disintegration test fluid (pH 1.2). Inclusion complexes prepared by freeze drying method and solvent evaporation method were similar. Freeze drying method seemed to be suitable for preparation of complex with most higher dissolution rate but coprecipitation method seemed not to be suitable. The dissolution rate of fentiazac increased markedly by ${\beta}-CyD$ complexation. The release rates of suppositories increased in the following order. Complex prepared by freeze dying method in PEG 1500 > complex prepared by solvent evaporation method in PEG 1500 > fentiazac in PEG 1500 > complex prepared by freeze dying method in Witepsol H-15 > complex prepared by solvent evaporation method in Witepsol H-15 > fentiazac in Witepsol H-15.

• Journal of Hydrogen and New Energy
• /
• v.17 no.2
• /
• pp.174-180
• /
• 2006

The eutectic Mg-23.5%Ni alloy was casted by melting and solidification. The powders of Mg-23.5%Ni and (Mg-23.5%Ni)-10% iron oxide were prepared by mechanical grinding of casted Mg-Ni alloy and casted Mg-Ni alloy+oxide, respectively. As milling time increases, hydriding and dehydriding rates of Mg-Ni and Mg-Ni-oxide alloy powders increase. The additions of iron oxide to Mg-Ni alloy and Mg-Ni-oxide increase hydriding rates and slightly decrease dehydriding rates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.169-172
• /
• 2003

Intact seeds of burcucumber (Sicyos angulatus L.) are not nearly germinated so that the farmers remove their arils before sowing. The study was carried out to measure the effort of aging, chilling, washing, chemical treatment, drying, and their sequential treatments on the germination of ones with arils and the seedling emergence. The seeds extruding over 1mm of their radicles and the seedlings with fully expanded cotyledons were counted daily for calculating the germination and the seedling emergence rates. Seedcoat softening using 10% NaOH solution somewhat enhanced their germination rate of the intact seeds harvested in the current year, but aging treatment done on 6 days at $45^{\circ}C$ after NaOH treatment increased the germination rate more than only NaOH treatment. A day washing after the NaOH treatment and a day chilling after the washing increasingly elevated the rates as well. Irrigation of 0.2% $\textrm{KNO}_3$ solution, moreover, showed the greatest germination rate of the priming treatments done during all the 7 day chilling. Drying the seeds after the combined treatment of chilling and priming more inclined the germination rate than nondrying ones, but red light treated during 24 hour desiccation was more effective in the germination rate increment than dark condition. The seeds done the sequential treatments of aging, NaOH, washing, combining chilling and priming and drying under red light illumination were germinated up to 80% but seedlings were emerged to 60%, lower than ones removed their arils.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).