• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.237-242
• /
• 2022

In this study, a drying method that can effectively remove residual solvent from (+)-dihydromyricetin was developed. Residual acetone concentration was efficiently removed below ICH-specified value (5,000 ppm) by simple rotary evaporation with ethanol pretreatment. In addition, the residual ethanol met the ICH-specified value (5,000 ppm) by simple rotary evaporation through the addition of water, and the residual moisture also met the specified value (<4%) for active pharmaceutical ingredients. At all the drying temperature (35, 45, and 55 ℃), a large amount of the residual solvent was initially removed during the drying, and the drying efficiency increased when increasing the drying temperature. Removal of residual solvent by ethanol pretreatment was shown to be related to high vapor pressure of acetone-ethanol mixture and hydrogen bonding between acetone and ethanol.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.319-323
• /
• 1999

This study was conducted to minimize the deterioration of dried kiwifruit quality. Osmotic dehydration was carried out as pretreatment before drying. After the kiwifruits were pretreated under optimized osmotic dehydration conditions, they were dried by three drying methods(hot air drying, vacuum drying, freeze drying). Hot air drying and vacuum drying were superior to freeze drying in the drying speed. But vacuum and freeze drying preserved more vitamin C than hot air drying. Also, osmotic dehydrated kiwifruit kept better quality than nontreated kiwifruit. Diffusion coefficient which describes moisture transfer, was high in drying process pretreated with osmosis. The changes of vitamin-C followed the second-order reaction rate equation with high RE, respectively.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.78-82
• /
• 1984

Effects of various drying conditions of agar gel on the physico-chemical properties of dried agar were investigated. For drying of the agar gel$(1.0{\times}1.0{\times}34.0cm)$ by means of sun drying, simple solar drying, hot-air drying ($30^{\circ}C$, control, natural convection), hot-air drying ($30^{\circ}C$, pretreatment, natural convection) and freeze drying, it took 96, 75, 67, 50 and 21 hours, respectively. The gel strengths of dried agar gel prepared by sun drying, solar drying, freeze drying and spray drying were320, 370, 270 and $360g/cm^2$, respectively and that of hot air-dried agar gel was influenced by drying temperature, pretreatment an mode of heat transfer. The gel strength, the gelation temperature and other quality index of spray-dried agar were not inferior to those of sun-dried agar, but it was not expected to be economical because of it recovery rate. In case of hot air drying, the gel strength value of agar increased as the drying rate increased. No significant differences among various products were noted in the gelation temperature, the melting temperature, the ash and $SO_3$ content.

• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.261-266
• /
• 2011

Supercritical $CO_2$ pretreatment before dehydration leads to a faster dehydration rate. The best supercritical $CO_2$ pretreatment conditions for the most effective dehydration were $45^{\circ}C$, 25 MPa and $55^{\circ}C$, 25 MPa. Increasing pressure of the supercritical $CO_2$ pretreatment system tended to accelerate the dehydration rate more than increasing temperature did. Samples pretreated at higher temperatures and pressures showed greater shrinking and pore distribution on scanning electron microscopy. Control samples maintained their cell walls, whereas samples pretreated at higher temperatures and pressures showed more cell disruption, and more pores were observed. Pore sizes of control and pretreated samples were about 100 and $70{\sim}80\;{\mu}m$, respectively. Samples pretreated at higher temperatures and pressures had smaller pores and a denser distribution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1680-1687
• /
• 2011

This study was performed to determine the effects of pretreatment and drying methods on the quality and physiological activities of garlic powders. Fresh garlic was boiled, baked, steamed or left untreated before hot-air drying or freeze-drying. Electron-donating abilities were higher in the untreated group for each drying method. Relative EDA of baked group was 32.8%, whereas those of the boiling and steaming groups were 12.4% and 20.1%, respectively. Nitrite-scavenging effects were slightly affected by processing methods. Polyphenol content of the processing group was higher in the hot-air drying than freeze-drying group, and it was significantly highest in the untreated freeze-dried group. The value of polyphenol in the baked group was significantly higher than those of the boiling and steaming groups. Tyrosine contents of garlic powder were higher in the hot-air drying than freeze-drying group, and it was significantly highest in the untreated group of each drying method. Antimicrobial activities of the garlic powders were higher in freeze-drying group compared to the hot-air drying group. Therefore, antimicrobial activities of garlic powder were affected by heating treatments.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.2
• /
• pp.98-104
• /
• 2010

Eleuthero(Eleutherococcus senticosus Maxim.) cortex is well known as a herb medicine for tonic. This study was performed to improve the quality of dried E. senticosus cortex. Investigation of quality factor and contents of efficient compounds under different steaming times and drying methods were performed to determine the proper processing and drying conditions of Eleuthero cortex harvested on March in annual stems. The proper steaming time for peeling bark to make high quality Eleuthero cortex took less than 20 mins. Eleutheroside B and E contents among drying methods were significantly different at 5% level DMRT. The $50^{\circ}C$ heat drying was the most advisable condition for drying, when drying and keeping contents of effective compounds.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.849-857
• /
• 2012

This study was conducted to determine the effects of the pretreatment and infrared drying methods on the physicochemical properties and antioxidant activities of dried peaches. The pretreatment methods were the 30 min treatment of NaCl, vitamin C, and soluble Ca (1:5 w/v immersion ratio), and leaving them untreated before infrared drying at $55^{\circ}C$ for 20 hr. The moisture content was lower in the pre-treated group and was significantly lowest in the 0.3% NaCl. The titratable acidity and soluble solid content and acid ratio (SS/TA) were high for the vitamin C and soluble Ca groups. The browning degree and cutting strength of the dried peach were lower in the pre-treated group. The total sugar content in the 0.3% NaCl group was significantly higher than those in the vitamin C and soluble Ca groups. The Ca contents were more effective in the soluble Ca treated group and increased with higher Ca concentration. The sensory evaluation results indicated that the organoleptic scores for the overall preference were higher in the 0.1% vitamin C treated group. The phenolic compounds and ABTS radical scavenging ability were high for the 0.1% vitamin C and 0.1% soluble Ca treated groups. These results suggest that pretreatment affected the qualities of the dried peaches, showing that infrared drying can be applied to the production of high quality dried peach products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1573-1579
• /
• 2004

This study was conducted to develop intermediate material for new processed food from sweet pumpkin. Osmotic dehydration was carried out as pretreatment before drying. After the sweet pumpkins were pretreated under optimized osmotic dehydration conditions, they were dried by three drying methods (hot air drying, vacuum drying and cold air drying). The moisture contents of dried sweet pumpkin products by osmosis treatment (sucrose) and hot air drying, vacuum drying, and cold air drying were 14.48, 14.09 and 13.87%, respectively. Cold air drying preserved more vitamin C content and showed lower color difference than hot air drying and vacuum drying. As a result of microscopic analysis, cold air dried sweet pumpkin was observed regular tissue, while hot air and vacuum dried sweet pumpkins were observed a cell collapse following the loss of water.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.40-46
• /
• 1997

Sludgc d~sposal has been a major challenge in the wastewater treatment. Drying is operation which is separated fromsewage sludge to solid and liquid by heating. Drying needs to pretreatment process for effective "thation, incinerationand dispaal The objective of this work was to the drying dewatered sewage sludge by microwave heating, and tocompare the experimental rcsults with thcorctical rcsults. Microwave drylng is fast and has a high efficiency. In thepresent \ark, an unsteady state analysis of one dunensional drying, with microwave heating, is carried out. In drying ratecurve, moisture movement at falling rate period occured by dfision. A good agreement was abtamed between the modcland the experimental results using the slab sample of 0.2cm thickness. 0.2cm thickness.