• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.29-39
• /
• 1986

To investigate the effect of presurfacing, both 25mm rough and pre surfaced oak boards (Quercus grosseserrata BI.) were dried in the same dry kiln condition. Drying curves, drying strains and drying defects of rough and presurfaced boards were compared. The results obatained are as follows. 1. Average drying rate of rough and presurfaced boards from green to 10% M.C. was 0.276%/hr. and 0.284%/hr., respectively. 2. At the early stage of drying, in case of rough boards, maximum tensile strain of outer slices was $-24.2{\times}10^{-4}$mm/mm and maximum compressive strain of innermost slices was $13.0{\times}10^{-4}$mm/mm, and in case of pre surfaced boards, maximum tensile strain of outer slices was $-14.5{\times}10^{-4}$mm/mm and maximum compressive strain of innermost slices was $28.1{\times}10^{-4}$mm/mm. And in both cases, stress reversal occurred at about 40% M.C.. 3. Maximum surface checking appeared at about 40% M.C.. Of the 10 rough boards. 6 hoards contained surface checks, but presurfaced boards did not contained surface checks after drying. And the results of end checking were similar to those of surface checking. But, honeycomb was not found in both cases. 4. Board shrinkage. warp and casehardening of presurfaced boards were similar to those of rough boards. But, collapse of prsurfaced boards was less than that of rough boards.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.111-118
• /
• 1982

A closed solar collector drying system by water exchange was evaluated for the drying of ginseng. The thermal efficiency of solar collector, drying efficiency, drying characteristics and product quality were investigated. The drying period was reduced by one-thirds in comparison with typical method. The maximum and minimum thermal efficiency of the solar collector during drying period were 14.42%, and 4.73%, respectively. The drying efficiency of solar collector and control system showed 28.34%, and 13.45%, respectively; net drying efficiency being 14.8%. The drying rate curve of red ginseng showed only falling rate period, and its equation was $Y=50.7023t.^{-0.4138}$ The brown color intensity of red ginseng was higher in solar collector drying system than in typical method, and reductivity by diphenyl picryl hydrazil solution in red ginseng extract showed similar result to brown color intensity.

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.229-235
• /
• 2000

The absorption characteristics of Korean yam powder according to different drying methods were investigated. The physical properties of yam powder by different drying methods were showed the biggest porosity in freeze drying sample, while the smallest in hot air drying sample. No difference was founded in proximate compositions of yam powder by various drying methods. The amount of total phenolic compound and Vit C were showed the bigger decrement in freeze dried sample than other drying methods. The time reaching to equilibrium moisture content were determined in 12 days. Monolayer moisture contents were predicted to 0.0508∼0.0588 by BET equation and 0.0705∼0.0811 g H2O/g solid by GAB equation. BET equation for isothermal absorption curve showed over 0.95 R-square for every drying methods. GAB equation showed over 0.99 in vacuum and freeze drying but a poor R-square in hot air drying.

• Water for future
• /
• v.28 no.4
• /
• pp.215-222
• /
• 1995

The water retention function which has the hysteresis phenomena is required to analyze the Richards equation which is a governing equation of the unsaturated flow, and its hysteresis phenomena has influence upon the characteristics of the unsaturated flow. The accuracy of the published hysteresis models is compared by using experimental data of the water retention function. The apparatus to experiment the hysteresis phenomena on the soil is developed, and experimental data for the main wetting process and the main drying process of the water retention function are obtained. The parameters of the van Genuchten equation are calibrated by using experimentally obtained data. As a result of the comparison of the selected hysteresis models which simulate the main drying curve from the main wetting curve, the Model I-1(Mualem) overestimates and the Model II-1(Mualem) underestimates but the Model III-2(Park and Sonu) similarly estimates the experimental data of the main drying curve.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.6
• /
• pp.37-48
• /
• 2017

Soil-water characteristic curve (SWCC) has been widely used to estimate the shear strength and coefficient of permeability for unsaturated soils. In general, it is divided into the drying path in which the water is discharged and the wetting path in which the water is permeated, and it has a hysteresis indicating different suctions at the same volumetric water content. In reality the field behavior of unsaturated soils is much closer to the wetting path during the infiltration. The drying path has been practically used for various analyses because obtaining the wetting path takes longer than the drying path. Although many approaches for estimating wetting path have been studied till now, these are complex and do not fit well. Therefore, a simple method for estimating wetting path based on empirical approach in this study is proposed in unsaturated soils, and a feasibility study is conducted as well.

• Journal of Forest and Environmental Science
• /
• v.12 no.1
• /
• pp.1-12
• /
• 1996

This study was carried out to estimate drying schedule of Fagaceae four species grown in Kangwon-Do by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process, initial check, collapse and internal check during drying following each board thickness (1.5cm, 2.5cm, 3.5cm, 4.5cm). The results were as follows; Current moisture content of each board showed a rapid drying curve with the high initial moisture content of board. With the high initial moisture content, the incease of board thickness and the slowness of changing rate of moisture content, species took long to do drying. Also, the initial conditions of drying had to be mild condition with the increase of board thickness.

• Journal of Forest and Environmental Science
• /
• v.10 no.1
• /
• pp.38-48
• /
• 1994

This study was carried out to estimate drying schedule of Fagaceae four species grown in Kangwon-Do by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process, initial check, collapse and internal check during drying. The results were summerized as follows ; Current moisture content of each board showed a rapid drying curve with the hight initial moisture content of board and species with the high initial moisture content took long to do drying. Appearance of checks for Quercus variabilis were extremely severe and estimated schedule was $T_5-C_2$. The shrinkage rate of grain direction was in the order of tangential direction > radial direction > longitudial direction and the shrinkage rate of oven-drying at $100^{\circ}C$ was bigger than normal shrinkage rate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.503-508
• /
• 1991

The salted and dried mullet(Mugil Japonicus) roe had about 42% of protein and 41% of lipid content as major compoments. Therefore the lipid oxidation and the deterioration of protein occurred during drying and storage periods. In order to keep the good quality of the dried roe, acid, peroxide, thiobarbituric acid value and the contitutional amino acid were studied in the different drying air velocities at the conditions of 60% R.H. and $20^{\circ}C$ of drying air temperature. The optimum air velocity showed 2m/sec, which was excellently superior to the lipid and protein quality than those of other air velocities on the dried mullet roe. The drying period shortened from 20 days in the conventional processing method to 7 days in the modified processing method that had 2m/sec of drying air velocity. The drying rate curve had only a falling-rate drying period and not to have a constant-rate drying period.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.381-388
• /
• 2012

Purpose: In this study, the changes in the shape of silicone hydrogel lenses, dryness of lens and objective/ subjective symptoms that could be induced by repeating dryness of lens and objective/subjective symptoms were investigated. Methods: After drying and rehydrating of silicone hydrogel lenses with different lens material and thickness for 4 times, their overall diameters and base curves were compared. Subjective symptoms, non-invasive tear break-up time (NIBUTs) and blinking rate were evaluated after wearing dehydrated silicone hydrogel lens. Results: Overall diameter and base curve increased in all tested silicone hydrogel lenses by repeating dryness and rehydration. The degree of change in over all diameter and base curve were variable on the material. There were irregular change of lens parameters in thicker lens. When the subjects wore silicone hydrogel lenses after drying and rehydrating, their NIBUTs were decreased and blink rates were increased regardless of lens material or thickness. In addition, repetitive drying of silicone hydrogel lenses affected the lens fitting. Therefore, subjective symptoms such as itching, pain, irritation, foreign body sensation, dryness tended to be increased. Conclusions: The results obtained from the study may suggest to develop durable silicone hydrogel contact lenses against dry environment since the changes in parameters of silicone hydrogel lens and the subjective discomfort were observed after repetitive drying and rehydration.

• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.191-196
• /
• 1995

Using sol-gel processing method, thin films of lathanum modified lead titanate(PLT) on Corning 7059 glass were prepared. A differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate residual organices in them. The heat-treated films were characterized by X-ray diffraction(XRD). Microstructures of the films were observed by a scanning electron microscope (SEM). Optical properties of the films were determined by a UV-VIS spectrophotometer. The waveguiding properties and optical attenuation were measured with the end coupling method and the cut back method. Effects of the drying conditions on the transmittance and the propagation loss of the films were investigated. Experimemtal results showed that the content of residual organics in the film decreased as the drying temperature of the film increased. As the La content of the film increased, the grain size decreased and the transmittance increased. The transmittances of the films increased with the increasing of the drying temperature. The propagation losses in the film decreased as the drying temperature increased.