• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.358-364
• /
• 1995

In order to determine the moisture content level for safe storage of wild vegetables, drying characteristics and water vapor sorption characteristics of four vegetables, i.e., zucchini slice, sweet potato stem, taro stem, and platycodon, were investigated. The drying curves of these vegetables were consisted of three characteristic stages which were the initial settling down period, the constant drying rate period, and the falling drying rate period. And the falling rate period of the vegetables showed 2 or 3 parts of falling rate. All of the falling rate curves of the vegetables showed upwardly convex shape which is known as a characteristic pattern for the drying of fibrous food materials. The critical moisture contents of the vegetables were $8.29{\sim}9.75,\;10.40{\sim}15.08,\;9.51{\sim}14.52\;and\;3.29{\sim}3.56g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. Activation energy values of drying rate during falling rate period were 2.30, 2.11, 4.97, and 2.80 kcal/mol for zucchini slice, sweet potato stem, taro stem, and platycodon respectively. The BET monolayer moisture contents of the vegetables were $10.05{\sim}13.59,\;9.49{\sim}12.69,\;9.50{\sim}16.48\;and\;5.01{\sim}5.44g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. And these values were found to be very compatible with the values of the critical moisture content. Consequently, it was found that the moisture of these vegetables should be removed below the BET monolayer moisture content or below the critical moisture content for the long term storage.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1083-1095
• /
• 2003

The analysis of drying stream characteristics for about 500 streams from field survey data with 19 items has been fulfilled. Also, a study area has been determined, and criteria of estimation has been established : criteria such as, available hydrological data, the size of stream lengths and basin areas and regional characteristics. Then they are applied to designated study areas. The final selected study areas are 8 basins. The analysis of drying stream characteristics using a GIS has been applied to 5 basins in which spacial data is comparatively implemented among the final 8 target catchments. The spacial analysis using a GIS is applied to stream slopes for upstream and downstram at weirs, overlaying the map of buffering stream networks and ground water pump stations map, sinuosity of drying stream. As a result of drying streams survey analysis, drying stream characteristics are followed; levee types are earth and natural, cross sectional shapes are trapezoid, stream bed materials are gravels and sands, facilities in streams are weirs. As a result of GIS analysis, stream slopes are comparatively larger downstream than upstream close to weirs. There are arranged ground water pump stations less than 500m from stream networks. Also the average of sinuosity for each drying stream is in the range of 1.229∼1.475, comparatively a serious.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.56-62
• /
• 2015

In this study, the quality characteristics of different drying methods of Aronia melanocarpa, which contains large amounts of bioactive substances, were investigated for the improvement of their practical use. During the drying period, the weight reduction was the highest with vacuum freeze drying (81.6%). The water content was reduced to the maximum level when vacuum freeze-drying was used. With regard to the color value measurement results, there were no significant differences in the $L^*$ value. Values of $a^*$ and $b^*$ were increased in vacuum freeze drying and cold air drying, but decreased in hot air drying. The hardness was increased dramatically after 36 hours of hot air drying, while with cold air drying, it increased slowly until 132 hr and increased rapidly after 132 hr. The dried yield was the highest with cold air drying (24.2%). As for the general component analysis results of Aronia melanocarpa, the moisture content was the lowest, and the crude protein and crude fat contents were the highest with vacuum freeze drying. No difference in pH value was shown among the dried Aronia melanocarpa obtained from the different drying methods, but the sugar content was the highest with vacuum freeze drying. The mineral content was the highest with cold air drying, and K, Ca, Mg, and Na were the major minerals. The free sugar content of dried Aronia melanocarpa was found to be 5.92~20.59 g/100 g, and the highest free sugar content was found with vaccum freeze drying.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.313-317
• /
• 2017

With the continuous increase of energy demand, low-grade coal is regarded as one of new energy sources. However, due to the high water content, the utilization efficiency of low-grade coal is not good to be used in recent conversion plants. Therefore, it requires a drying process to lower the water content in low-grade coals. Although a variety of drying experiments were conducted, drying characteristics in accordance with the pressure change has not been progressed. In this study, the flash drying characteristics of low grade coal with high moisture content (21.5 wt%) were determined in a pressurized micro-riser. The effect of operation conditions such as pressure (1-40 bar), dryer temperature ($200-600^{\circ}C$), and tube length (2-6 m) on drying ratios were investigated.

• Korean journal of food and cookery science
• /
• v.23 no.6
• /
• pp.800-809
• /
• 2007

To develope Hanbang beef jerky as health food, six kinds of beef jerky were prepared by adding sugar (A), licorice (B) and three kinds of spice extracts (clove: C, fennel fruit: D and Chungyang green pepper extract: E) and mixture of all extracts (F). The effects of the drying method and added spice extracts on the quality characteristics of the beef jerky were evaluated. In general, the air-blast dried beef jerky contained $31{\sim}33%$ moisture, $50.0{\sim}51.2%$ crude protein, $7.2{\sim}7.8%$ crude lipid and $3.0{\sim}3.3%$ crude ash. For the mineral content of the air-blast dried jerky, the most prevalent mineral was Na $(1540.08{\sim}1838.17$ mg%), followed by K, P, Mg, and Ca. The Ca content of the beef jerky was highest in the mixed extract group (88.53 mg%), and the lowest content was in sugar-added group (53.12 mg%). For the color properties, the L-value (lightness), a-value (redness) and b-value (yellowness) were higher in the air-blast dried beef jerky than in the hot air dried samples. The drying methods showed their greatest affect on the redness (a) for all six jerkies (p<0.001). For the preference by sensory evaluation, the beef jerky samples with added sugar (A) and licorice extract (B) had significantly higher scores than the beef jerky samples with the added spice extracts, for both of air-blast drying and hot air drying (p<0.05). Preference for the air-blast dried beef jerkies with added clove (C) and fennel fruits (D) were significantly higher, in terms of taste, color, softness and aftertaste as compared to the respective hot air dried jerkies (p<0.01). Considering all the obtained results, we concluded that licorice and spice extracts can be used as natural preservatives in the development of health foods and the air-blast drying method is recommended to improve the quality characteristics of beef jerky.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.95-103
• /
• 2010

Roll to Roll (R2R) is one of the most promising production technologies in the printed electronics such as OLEDs, e-paper, backplanes, RFID because this technology can save production cost and increase production speed. Printed electronics includes various processes such as printing, drying, winding, unwinding, and so on. In printed electronics R2R system, air-flotation oven is employed for drying process. Therefore, it is essential to introduce efficient and fast drying process when printing is finished. This paper considers the analysis of drying process in R2R that involves hot air flow. Air-flotation oven consists of non-contact supports and drying of coated web materials such as plastic films and paper. In this paper, experimental results and numerical analysis of pressure-pad air bar are investigated. The aerodynamic characteristics of pressure-pad air bar are numerically calculated using computational fluid dynamics (CFD) approach. Then the measured values of the aerodynamic forces for air bars are compared with those of CFD analysis.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.385-397
• /
• 2012

Purpose: Drying characteristics of sawdust was studied under batch mode using lab scale microwave dryer. The objective of this study was to investigate the effect of material load and microwave output power on drying characteristics of sawdust. Methods: Material load and microwave output power were varied from 23 to 186 g and 530 to 370 W respectively. Different kinetic models were tested to fit the drying rates of sawdust. Similarly, the activation energy was calculated by employing the Arrhenius equation. Results: The drying efficiency increased considerably, whereas the specific energy consumption significantly decreased with increase in material load and microwave output power. The cumulative energy efficiency increased by 9%, and the specific energy consumption decreased by 8% when the material load was increased from 23 to 186 g. The effective diffusivity increased with decrease in material load and increase in microwave output power. The previously published model gave the best fit for data points with $R^2$ and RMSE values of 0.999 and 0.01, respectively. Conclusions: The data obtained from this study could be used as a basis for modeling of large scale industrial microwave dryers for the pellet production.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.11 no.4
• /
• pp.22-27
• /
• 2015

Quality characteristics of Shiitake mushroom using two types of dryers, energy-efficient heat pump hot-air dryer and electric heater hot-air dryer were compared. Energy consumed during drying by heat pump hot-air dryer and electric heater hot-air dryer were 22.8 kWh and 28.9 kWh, respectively. Total polyphenol content of heat pump hot-air dryer and electric heater hot-air dryer after drying were $290.55{\pm}10.56ppm$ and $192.99{\pm}6.53ppm$, respectively. No differences were observed between dryers in reconstitution rate and browning ratio after drying. Also, there were no differences between dryers in color value and ${\Delta}E$ value after drying. Shiitake mushroom drying at $45^{\circ}C$ by heat pump hot-air dryer was proved to be more efficient in energy consumption than by electric heater hot-air dryer.

• Solar Energy
• /
• v.11 no.3
• /
• pp.21-30
• /
• 1991

In-bin grain drying experiments were performed to investigate the drying characteristics between natural air and solar heated-air drying system of rough rice. A computer simulation model for solar drying system of rough rice resulted in a good agreement between the experimental and predicted moisture content. In order to save the electric energy consumption of fan, airflow rates control system using inverter was developed and resulted in the effect of energy saving.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.145-150
• /
• 2009

In this study, characteristics of microwave and convective drying are studied by using a multiphase porous media model. Temperature and moisture profiles for hot-air convective heating and microwave heating of 1-D porous media with varying time and space are numerically investigated. This result shows the microwave drying method is more effective than the convective drying method. Comparing to convective drying, microwave drying can increase temperature and evaporation rate significantly since microwave generates internal heat and increases internal pressure, which results in moisture movement toward the surface on which moisture is vaporized.