• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.51-58
• /
• 2020

달 탐사에 대한 관심이 늘어나면서 인공월면토를 포함한 달 지상 환경 모사에 대한 연구가 진행되고 있다. 인공월면토를 포함하여 진공환경을 조성할 때 발생하는 문제점 중의 하나는 토양에서 나오는 탈 가스로 인해 고진공에 도달하는 시간이 길어진다는 것이다. 이러한 탈 가스의 대부분은 수분이며, 진공챔버에 넣기 전 인공월면토의 표면에 붙어있는 수분을 제거하는 전처리 과정을 수행한다면 고진공에 도달하는 시간을 상당히 줄일 수 있다. 기존의 토양 건조 방법을 사용하여 각 방법이 인공월면토의 수분제거에 얼마나 효과적인지 확인하였다. 드라이 오븐을 이용한 방법, 마이크로웨이브 오븐을 이용한 방법, 직접가열 건조하는 방법과 진공 오븐을 이용한 방법을 이용하여 인공월면토 시료의 건조 실험을 수행하였으며, 건조 실험의 결과를 제시하였다. 실험결과 드라이 오븐에서 110℃로 건조하는 방법과 마이크로웨이브 오븐을 이용한 건조 방법은 수분제거 효과가 충분하지 않았으며, 200℃ 이상에서 진공오븐을 이용한 방법과 직접 가열하는 방법은 수분제거 효과가 좋았다.

• 공업화학
• /
• 제8권1호
• /
• pp.1-7
• /
• 1997

냉동 건조에서 주기적 압력 함수의 이용은 정압에서의 건조 속도보다 더 효과적으로 나타났다. 이러한 공정의 궁극적인 목적은 건조 시간을 감소시킴으로써 에너지 비용을 줄이는데 있다. 이 연구에서 건조 시간을 감소시키기 위해 주기적 압력 함수에 대한 개념을 도입하여 건조 속도에 영향을 미치는 인자들-펄스의 형태, 압력 진폭의 크기, 중간 시간의 길이-에 대한 영향을 고려하였다. 건조 온도는 항상 $20^{\circ}C$로 일정하게 유지하였다. 그리고 펄스의 형태는 일정한 압력의 형태보다 저압에서 고압으로 압력을 변화시키는 주기를 주는 것이 더 유리함을 알 수 있었다. 또한 펄스의 진폭크기는 작을수록 그리고 중간 시간은 길수록 건조 속도가 상당히 증가되었다.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.314-322
• /
• 2017

Purpose: This study was conducted to investigate the hot air drying characteristics of squash slices depending on the drying conditions (input air velocity, input air temperature, and sample thickness). Methods: The developed drying system was equipped with a controllable air blower and electric finned heater, drying chamber, and ventilation fan. Squash (summer squash called Korean zucchini) samples were cut into slices of two different thicknesses (5 and 10 mm). These were then dried at two different input air temperatures (60 and $70^{\circ}C$) and air velocities (5 and 7 m/s). Six well-known drying models were tested to describe the experimental drying data. A non-linear regression analysis was applied to determine model constants and statistical indices such as the coefficient of determination ($R^2$), reduced chi-square (${\chi}^2$), and root mean square error (RMSE). In addition, the effective moisture diffusivity ($D_{eff}$) was estimated based on the curve of ln(MR) versus drying time. Results: The results clearly showed that drying time decreased with an increase in input air temperature. Slice thickness also affected the drying time. Air velocity had a greater influence on drying time at $70^{\circ}C$ than at $60^{\circ}C$ for both thicknesses. All drying models accurately described the drying curve of squash slices regardless of slice thickness and drying conditions; the Modified Henderson and Pabis model had the best performance with the highest R2 and the lowest RMSE values. The effective moisture diffusivity ($D_{eff}$) changes, obtained from Fick's diffusion method, were between $1.67{\times}10^{-10}$ and $7.01{\times}10^{-10}m^2/s$. The moisture diffusivity was increased with an increase in input air temperature, velocity, and thickness. Conclusions: The drying time of squash slices varied depending on input temperature, velocity, and thickness of slices. The further study is necessary to figure out optimal drying condition for squash slices with retaining its original quality.

• Journal of mucopolysaccharidosis and rare diseases
• /
• 제1권1호
• /
• pp.28-30
• /
• 2015

Biologics present a challenge to both the manufacturer and end user. They must usually be formulated as parenterals. However, they are often unstable in liquid form, due to their complex structure and composition. In that case, they must be manufactured using highly specialized processes, such as lyophilization (freeze-drying). Lyophilization nearly eliminates stability issues. Reducing a compound's sensitivity to temperature prolongs its shelf life. However, reconstitution can be cumbersome, involving multiple steps that increase the potential for error. Dual-chamber technology provides an effective alternative, combining a lyophilized drug and diluent in a closed system and enabling reconstitution in a few simple steps.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.947-952
• /
• 2009

The purpose of this study is to analyze skin wettedness($w$) used as the rate index of thermal comfort, and to evaluate the wear comfort of outdoorwear. Skin wettedness is widely used to express the degree of thermal comfort. If skin wettedness exceeds a certain threshold, the body feels damp and discomfort. An experiment which consisted of rest(30 min), exercise(30 min) and recovery(20 min) periods was administered in a climate chamber with 10 healthy male participants. Two kinds of outdoorwears made of 100% cotton fabrics (Control) and specially engineered fabrics having feature of quick sweat absorbency and high speed drying fabric (Functional) were evaluated in the experiment. The condition of climate chamber was controlled according to the thermal insulation of 4 kinds of experimental ensembles(E1~E4). Total sweat loss, sweat loss absorbed into clothing and skin temperature were measured. Skin wettedness was calculated from the ratio of evaporative rate to the maximal evaporative capacity. Skin wettedness of 'Functional' was lower than 'Control' in the 3 kinds of ensembles(E1, E2, E4) because the materials of 'Functional' were composed of quick sweat absorbency and high speed drying fabrics, water vapour permeability and waterproof fabrics.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.635-643
• /
• 2011

This study was investigated to evaluate the physiological responses on T-shirts manufactured with selected functional materials by body parts which were selectioned on the distribution of sweating and temperature change. Seven healthy men in twenties were participated in a climate chamber of $27{\pm}0.5^{\circ}C$ and $50{\pm}1%RHC$. Three kinds of T-shirts named 'D1', 'D2' and 'Poly' were used as experimental clothings. Four kinds of functional materials of quick absorbing/drying were used in all section in 'D1', but two kinds of functional materials used partially in 'D2'. 'Poly' T-shirts used only polyester. In an experimental schedule of 90 minutes, which were consisted of 'Rest', twice of 'Exercise' and twice of 'Recovery' periods, the subjects walked on a treadmill with 60% of $VO_2max$. As a physiological responses, the microclimate temperature, surface temperature(skin, clothing) and sweat rate were measured. Temperature regulation was kept well in 'D1' rather than other T-shirts. The quick absorbing/drying T-shirts showed its performance well as the exercise goes on the second half. With these results in mind, 'D1' will be more effective for long hours exercise such as climbing rather than short hours exercise.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.125-126
• /
• 2021

In order to improve the housing culture, construction changes for the utilization of diverse and multifunctional spaces are appearing in response to the increasing diverse needs of consumers. Cellular Light-weight Concrete (CLC) is being developed for use in fire-resistant heat-insulating walls and non-bearing walls. However, manufacturing non-uniformity has become a problem as a drawback due to the use of foamed bubbles and normal temperature curing, and additional research is required. Therefore, in order to suppress cracks due to drying shrinkage, silica sand is mixed with CLC to try to understand its characteristics. In the experiment, the compressive strength from 7 to 28 days of age was measured via a constant temperature and humidity chamber, and the drying shrinkage was analyzed according to each condition using a strain gauge. The compressive strength of matrix tends to decrease as the substitution rate of silica sand increases. This is judged by the result derived from the fact that the specific surface area of silica sand is smaller than that of slag. Based on KS F 2701 (ALC block), the compressive strength of 0.6 products is 4.9 MPa or more as a guide, so the maximum replacement rate of silica sand that satisfies this can be seen at 60%. Looking at the change in drying shrinkage for just 7 days, the shrinkage due to temperature change and drying is 0.7 mm, and the possibility of cracking due to shrinkage can be seen, and it seems that continuous improvement and supplementation are needed in the future.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.27-33
• /
• 1991

Three kinds of specimens(radiata pine sapwood, radiata pine heartwood and whemlock heartwood) were dried at four temperature levels (30, 40, 50 and $60^{\circ}C$) in an emvironmental chamber. Unsteady-state diffusion coefficients were calculated from obtained drying fates by using infinite slab equation for first half of sorption and interval diffusion equation for second half of sorption. Activation energies for moisture diffusion in wood were calculated from the diffusion coefficients obtained at four temperatures. In most cases diffusion coefficients for radial movement were higher than those for tangential movement. Activation energy differences between sapwood and heartwood weren't significant for radial movement, but were significant for tangential movement. Most activation energies calculated from drying rates were lower than heat of water condensation(about 11,000cal/mole). Specially the avenge activation energy for sapwood tangential movement was only 5,000cal/mole.

• 태양에너지
• /
• 제17권2호
• /
• pp.3-11
• /
• 1997

열펌프건조기는 증발기에 의한 냉각및 감습기능과 응축기에 의한 가열기능을 대류형건조기와 연계시킴으로써 필연적 손실로 분류되던 배기가 갖고 있는 현열과 잠열을 회수하여 재활용할 수 있는 이점이 있다. 본 연구에서는 HFC134a를 냉매로 사용한 배치형(batch type) 열펌프건조기를 설계제작하여 건조실의 유지온도, 공기의 바이패스비(bypass ratio), 냉매의 과열도를 일정하게 유지하고 정면풍속(face velocity)과 압축기속도를 변화시켜 건조기의 성능을 분석하였으며 정면풍속의 증가에 따라 열펌프의 성적계수는 증가하나 SMER(Specific Moisture Extraction Rate)은 감소하였다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2002

Stresses that develop due to differential shrinkage between polymer modified cement mortar (PM) and Portland cement concrete (PCC) in a repaired concrete beam at early ages were investigated. Interface delamination or debonding of the newly cast repair material from the base is often observed in the field when the drying shrinkage of the repair material is relatively large. This study presents results of both experimental and analytical works. In the experimental part of the study, development of the material properties such as compressive strength, elastic modulus, interface bond strength, creep constant, and drying shrinkage was investigated by testing cylinders and beams for a three-week period in a constant-temperature chamber. Development of shrinkage-induced strains in a PM-PCC composite beam was determined. In the analytical part of the study, two analytical solutions were used to compare the experimental results with the analytically predicted values. One analysis method was of an exact type but could not consider the effect of creep. The other analysis method was rather approximate in nature but the creep effect was included. Comparison between the analytical and the experimental results showed that both analytical procedures resulted in stresses that were in fair agreement with the experimentally determined values. It may be important to consider the creep effect to estimate shrinkage-induced stresses at early ages.