• 설비공학논문집
• /
• 제14권9호
• /
• pp.725-733
• /
• 2002

In this study, the heat transport limitations of a two-phase closed thermosyphon were investigated. For the test, a two-phase closed thermosyphon ($L_t/: 600 mm,\;L_e:105mm,\;L_a:75mm,\;L_c:420mm,\;D_o:22.2mm,$ container: copper (inner grooved surface), working fluid: PFC ($C_6F_14$) was fabricated with a reservoir that can change the fill charge ratio. The following was imposed as the factors on the heat transport limitations of a two-phase closed thermosyphon. 1) Fill charge ratio of the working fluid. 2) Tilt angle of the longitudinal axis. From tile experimental data, some results were obtained as follows. When the fill charge ratio was relatively small ($\psi$20%), the heat transport limitation occurred about 100W by dry-out limitation. However over 40%, it shelved nearly constant value (500 W) by flooding limitation. The heat transport limitation according to the tilt angle increased smoothly until the tilt angle was $60^{\circ}$,/TEX>, after then decreased slowly.

• 대한한방부인과학회지
• /
• 제15권4호
• /
• pp.111-127
• /
• 2002

Purpose : This study investigated reliability of Oriental OB&GY questionnaires, valued the items and correlated relation of differentiation of syndromes of Oriental OB&GY questionnaires which is used by Dong-Eui OB&GY. Method : We analysised the result of 721 outpatients's questionnaires from March. 1. 1998 to March. 30. 2002 Results : 1. The reliability of Oriental OB&GY questionnaires above 95% is deficiency of Ki, deficiency of blood, dry of blood, deficiency of Um, stagnation of Ki, insuficiency of the kidneys, liver, heart, above 90% under 95% is deficiency of Yang, heat of constitution, heat of disease, dampness, stagnated blood, above 85% under 90% is phlegm, spleen above 80% under 85% is cold syndrom. 2. The order of frequency diagnosed by Oriental OB&GY questionnaires is dampness(78.7%), heart(66.8%), stagnation of Ki(63.8%), deficiency of blood(53.5%), deficiency of Ki(53.1%), phlegm(53.7%), insuficiency of the kidneys(50.1%), dry of blood(45.1%), spleen(41.4%), liver(36.2%), stagnated blood(36.2%), deficiency of Yang(35.6%), cold syndrom(29.8%), deficiency of Um(24.1%), heat of disease(22.5%), heat of constitution(20.1%). 3. The average of item of differentiation of syndromes above 90 is dampness, above 80 under 90 is deficiency of Ki, deficiency of blood, dry of blood, deficiency of Yang, cold syndrom, heat of constitution, stagnation of Ki, phlegm, stagnated blood, insuficiency of the kidneys, liver, heart, spleen, above 70 under 80 is deficiency of Um, heat of disease. 4. Deficiency of Ki is connected with question compounded of stagnation of Ki, deficiency of Yang is connected cold syndrom, cold syndrom is connected deficiency of Yang, stagnation of Ki is connected deficiency of Ki. 5. The differentiation of syndromes accompanied with others which is related to compounded question is deficiency of Ki, deficiency of blood, cold syndrom, stagnation of Ki, dampness, phlegm, stagnated blood, insuficiency of the kidneys, liver, heart, spleen, which isn't related to compounded question is dry of blood, deficiency of Um, deficiency of Yang, heat of disease.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.508-516
• /
• 1999

Polycrystalline powder of LixNi0.85Co0.15O2 was synthesized by pyrolyzing a powder precursor obtained by the PVA-precursor method. Coin cells of lithium-ion rechargeable battery were assembled, whose the cathodes were fabricated from the crystalline powders of LixNi0.85Co0.15O2 synthesized by the method. The effect of synthetic variation on the property of the cell was tested by carrying out 100 consecutive cycles of charge-dis-charge on the cells. The property of the cell was largely influenced by the pyrolysis conditions applied for the synthesis of the LixNi0.85Co0.15O2. Depending on whether the pyrolysis was carried out in standing air or in the flow of dry air, the discharge capacity and cycle-reversibility of the cell varied in large extent. When the powder precursor was pyrolyzed in standing air, a minor phase of lithium carbonate was remained in the LixNi0.85Co0.15O2. The carbon containing powder precursor had to be pyrolyzed in the flow of dry air to eliminate the minor phase. In the flow of dry air, the lithium carbonate in the precursor was eliminated over 500-700。C without any prominent heat event. By controlling the flow of air over the precursor during its pyrolysis, particle size could also be altered. The effect of flowing dry air, during first step pyrolysis or during second step heat treatment, on the property of the cell was discussed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.294-299
• /
• 2005

In order to control indoor air quality and save energy. it is needed to install a suitable ventilation system equipped with heat exchanger for heat recovery. Paper heat exchanger can recover $50{\sim}70$ of the enthalpy difference between supply and exhaust air. The purpose of this research is to obtain the experimental correlations for the friction factor, heat transfer coefficient, mass transfer coefficient and permeance of paper heat exchanger, which can be used for the performance prediction of the paper heat exchanger. Pressure drop at various velocities and heat transfer rate at various dry-bulb temperatures, relative humidities, and specific humidities are measured to make experimental correlations. The results of prediction using correlations show fairly good agreement with experimental data.

• Nuclear Engineering and Technology
• /
• 제34권1호
• /
• pp.90-103
• /
• 2002

The thermal and mechanical properties of compacted bentonite and bentonite-sand mixture were collected from the literatures and compiled. The thermal conductivity of bentonite is found to increase almost linearly with increasing dry density and water content of the bentonite. The specific heat can also be expressed as a function of water ontent, and the coefficient of thermal expansion is almost independent on the dry density. The logarithm of unconfined compressive strength and Young’s modulus of elasticity increase linearly with increasing dry density, and in the case of constant dry density, it can be fitted to a second order polynomial of water content. Also the unconfined compressive strength and Young’s modulus of elasticity of the bentonite-sand mixture decreases with increasing sand content. The Poisson’s ratio remains constant at the dry density higher than 1.6 Mg/m$_3$, and the shear strength increases with increasing dry density.

• 한국식품과학회지
• /
• 제36권4호
• /
• pp.568-573
• /
• 2004

3%의 콩단백질을 첨가한 옥수수전분 용액을 건조가열 시켜 만든 시료의 호화특성, 겔의 조직감 및 노화특성에 대해 연구하였다. 건조가열로 만들어진 시료의 경우, 단순 혼합 시료보다 낮은 pasting 온도와 높은 RVA 점도들을 보였으며 유의적으로 낮은 호화엔탈피를 보였다. 높은 온도에서 건조가열한 시료(heated sample)의 경우, 낮은 온도에서 건조가열한 시료(unheated sample)보다 pasting 온도가 낮았으며 peak viscosity, breakdown viscosity가 유의적으로 높았다. 또한 pH가 증가할수록 보다 높은 점도 profile을 보였다. 가열 건조한 시료는 낮은 파괴강도 및 파괴 strain을 보였으며 pH가 높을수록 elastic modulus와 파괴강도는 감소하고 파괴 strain은 증가하였다. 콩단백질의 첨가와 더불어 건조가열은 전분의 노화방지에 도움을 주며 겔의 미세구조를 변화시켜 겔의 조직감을 변화시켰다. 전분의 호화 및 노화특성과 겔의 조직감을 콩단백질의 첨가와 더불어 건조가열과 pH 조절을 이용하여 변화시킬 수 있었으며, 이는 전분의 호화온도와 단백질의 변성온도 이하의 온도에서 건조 후 고온 건조가열을 통해 전분-단백질의 구조적 변성과 결합을 유도하여 새로운 기능성 전분을 만들 수 있는 가능성을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.191-198
• /
• 2001

A numerical analysis of the heat and mass transfer and pressure drop characteristics in modular shell and tube bundle heat exchanger was carried out. Finite Concept Method based on FVM and $k-\varepsilon$ turbulent model were used for this analysis. Condensation heat transfer enhanced total heat transfer rate $4\sim8%$ higher than that of dry heat exchanger. With increasing humid air inlet velocity, temperature and relative humidity, and with decreasing heat exchanger aspect ratio and cooling water velocity, total heat and mass transfer rate could be increased. Cooling water inlet velocity had little effect on total heat transfer.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1646-1654
• /
• 2002

A two-phase closed thermosyphon was one of the most effective devices in the removing heat because of its simple structure, thermal diode characteristics, wide operating temperature range and so on. In this study, a two-phase closed thermosyphon(working fluid PFC(C6F14), container copper(inner grooved surface)) was fabricated with a reservoir which can change the fill charge ratio. The experiments were performed in the range of 50~600W heat flow rate and 10~70% fill charge ratio. The results were compared with some correlations that were presented by Rohsenow and Immura et al. in the evaporator, by Nusselt, Gross and Uehara et al. in the condenser and by Cohen and Bayley, Wallis, Kutateladze and Faghri et al. in heat transfer limitation etc.. The heat transfer coefficient at the evaporator increased with the input power. However the effect of the fill charge ratio was nearly negligible. At the condenser, it showed an opposite trend to the evaporator and with increase of the fill charge ratio, showed some enhancement of heat transfer. The heat transport limitation was occurred by the dry-out limitation for small fill charge ratio(10%) and presented about 100W. For the case of large fill charge ratio(Ψ$\geq$40%), it was occurred by the flooding limitation at about 500W.

• 대한치과교정학회지
• /
• 제28권6호
• /
• pp.927-935
• /
• 1998

본 연구의 목적은 수종의 nickel titanium 호선을 열멸균 처리 하였을 때 나타나는 물리적성질과 표면상태의 변화를 정량적으로 평가하고자 하는 것이다. 연구에 사용된 재료는 국산제품을 포함한 4종의 .$016\times.22$ 각형 nickel-titanium호선이며, 이들을 건열소독($180^{\circ}C$, 60분)군과 가압증기멸균($121^{\circ}C$, 15-20 psi, 30분)군, 그리고 아무런 처리를 하지 않은 대조군으로 구분하였다. 인정특성은 Inston (Model 4466, load cell capacity:1000kg)을 이용하여 표점거리 40mm, cross head는 분당 5mm의 속도, 실온의 조건에서 평가하였으며 쳐대인장강도와 연신율, 그리고 탄성률을 측정 및 계산하였다. 표면상태는 주사전자현미경과 profilometer로써 평가하였고, 1-test를 이용하여 통계적 분석을 하였다. 결과는 다음과 같다. 1. 실험에 사용된 nickel-titanium호선들은 모두 두가지 열멸균 처리에 의해 인장특성에 있어서 유의할 만한 변화를 보이지 않았다/ 2. 대조군에서 NiTi가 가장 높은 펴ㅛ면거칠기를 보였고, Align과 Sentalloy는 동일한 정도의 값을, Optimalloy는 가장 낮은 값을 지니고 있었다. 3. Align과 Optimalloy는 두가지 열멸균처리 후에 모두 유의할 만한 표면상태의 변화를 보이지 않았다. 그러나 NiTi는 건열소독후에 표면거칠기의 증가를 보였으며 Sentalloy는 두가지 열멸균후에 표면상태의 변화와 표면거칠기의 유위한 증가를 보였다.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.25-35
• /
• 2011

Purpose: There are some advantages of the acrylic resin denture base ; appropriate strength, volume safety, simple processing apparatus, and low cost. But, it have a weakness for fracture by intense pressure or shock. However, the repairs for resin denture base are possible using various materials and techniques. There is a few studies in repairs for resin denture base, but not clinical researches. And there is no studies in absorbed saliva into the region of fracture and bond strength. This study is to observe re-bond strength of resin denture base after repairing under saliva absorption. Methods: The samples were made of heat curing resin and the rectangular parallelepiped specimens which were 50mm long, 10mm wide and 3mm high. The four different groups immersed in the artificial saliva for 2 weeks were prepared, 1) no repaired control samples, 2) immediately repaired samples, 3) repaired samples after 1 day dry, and 4) repaired samples after 3 days dry. The prepared samples were repaired by two different curing materials, self curing resin and heat curing resin method. Each groups composed of 10 specimens were experimented with the three point bending tests for bonding strength measuring Results: There were under condition absorbed in the artificial saliva and repaired by self curing resin method, repaired specimens after 1 day and 3 days dry groups had higher values of bonding strengths than control group, and bonding strengths of immediately repaired samples were similar to those of control samples (p<0.05). There were under condition immersed in the artificial saliva and repaired by heat curing resin method, immediately repaired samples showed similar values to bonding strengths of control groups, and repaired samples after 1 day and 3 days dry groups were lower than those of control group (p>0.05). Conclusion: In this study, the repairs for resin denture base were remarkably high values of bonding strengths than those of the past, and showed that have stable bonding strengths independent of saliva absorption of denture base, so present repairs for resin denture base can be performed, regardless of saliva conditions.