• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2085-2091
• /
• 2020

The license for Kori-1, the first commercial reactor in Busan, Korea, was terminated in June 2017; therefore, preparations are being made for its decommissioning. Because the radioactivity of Bio-shield varies greatly throughout the structure, the doses received by the workers depend on the location, order, and duration of dismantling operations. Thus, a model for evaluating the worker external dose during the dismantling of the Kori-1 bio-shield was developed, and work scenarios for dose assessment were designed. The Dose evaluation code VISIPLAN was used for dose assessment. The dose rate around the bio-shield was evaluated and the level of exposure to the operator was evaluated according to the work scenario. The maximum annual external dose was calculated as 746.86 mSv for a diamond wire saw operator under dry cutting conditions, indicating that appropriate protective measures, such as changing dismantling sequence, remote monitoring, shield installation, and adjustment of work team are necessary for the safe dismantling of the bio-shield. Through these protective measures, it was found that the worker's dose could be below the dose limit.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1268-1268
• /
• 2001

The availability of in vivo and in sacco degradability values are limited because those methods require work with fistulated animals and are rather complicated, labour intensive and expensive. That is to say, the dynamics and logistics of the methodology result in considerable work, due to limitations on the amount of samples, number of bags that can be placed in an animal and different time intervals to perform kinetic studies. Therefore, a simpler method is necessary to estimate the degradation characteristics of the feed. In this way, near infrared reflectance spectroscopy has been used to predict degradation characteristics of forages. In other hand, the possibility of achieving successful transfer of spectra and equations between instruments is closely related. The objective of this study was to confirm the potential of NIR to optimize work conditions to avoid duplicated efforts in collaborative trials on animal feeds evaluation between research institutions. For this purpose, one set with forty hays and dehydrated forages samples from SERIDA and ten samples with the same characteristics from SIA, were be used to create a spectral database. A calibration was developed using samples from degradation essays made in SERIDA to predict dry matter and crude protein degradability. With the addition of five samples from SIA in original calibration set, the effect of different origin and location was compensated.

• Journal of English Language & Literature
• /
• v.64 no.2
• /
• pp.171-185
• /
• 2018

Students and other new readers of modernist poetry often experience difficulty with the influential early work of Ezra Pound. Although these typically brief poems may appear (deceptively) simple, an understanding of the relationship between Imagism and Vorticism is crucial to reading-or teaching-them effectively, which in turn requires significant familiarity with relevant poetics theories as well as representative poems. This essay clarifies the complex relations Imagism and Vorticism as two distinct styles that are too often conflated to the detriment of an accurate understanding of either one (and, in consequence, of the later modernist poetry that builds on their discoveries). In order to elucidate the modernists' justification of free verse over traditional metrical composition, I begin with an elaboration of T. E. Hulme's 1911 theory of the "cheerful, dry, and sophisticated" modern classicism on which both Imagism and Vorticism were largely predicated, developing Hulme's important distinction between the version of classicism that is "static" (and gives rise to Imagism) and the one that is "dynamic" (and leads to Vorticism and beyond it). In the following two sections, I draw upon and synthesize a broad range of Pound's own poetics statements to reveal the evolution of first sound ("melopoeia") and then the image ("phanopoeia") throughout his early work. Although the body of this article is analytical and historical in nature, it concludes with a practical template prompt for a creative response assignment, appropriate to undergraduate and graduate students, designed to help new readers recognize for themselves how Vorticist art works and why it matters.

• KSBB Journal
• /
• v.29 no.2
• /
• pp.124-130
• /
• 2014

Acer tegmentosum was a traditional Korean herbal medicine showing various pharmacological activities. In this work, A. tegmentosum were extracted with boiling water and then successively partitioned with dichloromethane, ethyl acetate, n-butyl alcohol (n-BuOH), and water. Salidoside, the target compound, was purified in n-BuOH phase using a chromatography method. For the analysis of salidoside, TLC and LC-MS were used as well as on-line screening $HPLC-ABTS^+$ assay with three different wavelength of 254, 280, and 320 nm. An amount of 1.34 g of salidoside were obtained in n-BuOH phase fromAcer tegmentosum was a traditional Korean herbal medicine showing various pharmacological activities. In this work, A. tegmentosum were extracted with boiling water and then successively partitioned with dichloromethane, ethyl acetate, n-butyl alcohol (n-BuOH), and water. Salidoside, the target compound, was purified in n-BuOH phase using a chromatography method. For the analysis of salidoside, TLC and LC-MS were used as well as online screening $HPLC-ABTS^+$ assay with three different wavelength of 254, 280, and 320 nm. An amount of 1.34 g of salidoside were obtained in n-BuOH phase from 3 kg of dry biomass. The on-line screening $HPLC-ABTS^+$ assay is rapid and efficient tool to search bioactivity from A. tegmentosum. 3 kg of dry biomass. The on-line screening $HPLC-ABTS^+$ assay is rapid and efficient tool to search bioactivity from A. tegmentosum.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.615-622
• /
• 2012

The aim of shotcrete is to increase the bearing capacity and to protect the excavated surface from erosion by preventing falling of rock mass. Shotcreting method is divided into two types as dry process and wet process. Since 1997, wet process method has been used more frequently than dry process method in field works. The failure to bond, so called rebound, occurs in many case during shotcrete works. The excess amount of rebound has a significant effect on the total construction cost. For example, material and craft-man cost increases, the shooting time delays due to deceleration of work execution stage, work efficiency of craft-man decreases and additional cost to remove the muck generates. In this study, therefore, the experimental analysis of rebound amount and strength was conducted by analyzing the actual construction data for wet process type of shotcreting method upon accelerator contents. Also, the effective and rational method was suggested, which can be actually implemented in the Korea construction sites.

• Journal of Korean Academy of Nursing Administration
• /
• v.2 no.2
• /
• pp.5-16
• /
• 1996

The purpose of this study is to identify the handwashing knowledge and attitudes of resistered nurses on general wards. Subjects for this study include 182 nurses working in general wards of a hospital in Seoul area. Data were collected by a questionnaire from July 30 to August 10,1996. Statistical analyses were done by the SPSS/PC program. The techniques used in this sudy included frequencies, chi-square test. The results of this study are summarized as follows. 1. 34.6% of the respondents reported that they washed their hand an average of 5 to 7 times during the work day. 2. 38.5% of the respondents reported always washing after each patient contact. Only 9.9% always washed before contact with a patient. 3. 56.6% of the respondents reported a washing time of 10 to 20 seconds, whereas 29.1% washed 21 to 30 seconds. Chi-square tests were employed to determine any differences in handwashing frequency and duration by age, working years, work position. There were no satistically significant differences among the variables. 4. 95.6% of the subjects used water and plain soap during the washing process. The respondents washed the palms of the hands, the backs of their hands and between their fingers(33%). Only 17.6% removed rings before handwashing. Similarly, 11% removed their wristwatch. The majority(96.2%) reported that they used communal textile towel to dry their hands. When asked what method they used to turn off the water faucet after washing, 98.4% reported using direct hand-to-faucet contact. 5. Nursing activities that showed the highest handwashing rates was after wound dressing(22.9%), followed by suctioning(21.4%), injection(21.2%), inserting catheter(18%). 6. Reasons cited for reduced handwashing frequency included being too busy to wash more often(74.7%), no need to wash more often(11.0%) and dry skin caused by frequent handwashing(3.3%). 7. When asked where they obtained their current knowledge of handwashing techniques, they reported professors(73.6%), resisted nurses(14.8%) and supervisor(6.6%). 8. Nursing staff thought that proper handwashing was important factor in decreasing nosocomical infections(72.4%).

• Korean Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.171-179
• /
• 2008

This study focuses on 130 estheticians currently working in and around Daegu and Gyeongbuk region, in order to find out the current state of affairs and side effects related to aromatherapy. This paper is based on a survey. SPSS win 11.0 program was used for the analysis of descriptive statistics and independent t-test. According to the result of analysis, about 33% of the estheticians have had allergy experience. And in terms of installation of an air ventilation fan, which is the most important facility in an treatment room, more than half (50.8%) replied they did not have one. There was a statistically significant difference between those estheticians suffering from allergy and those who did not, in symptoms of stuffy nose/rhinitis (P<0.01) and dry skin/itchiness (P<0.5). (Allergy symptoms from the 33% of estheticians were limited to those which occurred after he or she began career) On work related symptoms, those who had work history at hospitals/clinics or apothecaries were compared. A statistically relevant difference was confirmed between those estheticians with therapy experience and those who had none, in all symptoms except headaches and drowsiness/weariness. In other words, there was difference in symptoms such as dryness of skin/itchiness (P<0.01), stuffy nose/rhinitis, dry throat, tension/nervousness, dizziness, tired eyes(P<0.5), nausea, having trouble with focusing, and fatigue(P<0.1). Those estheticians who had a history of treatment especially suffered most from dryness of skin and itchiness. The rate of regular check-ups and the use of masks, employed for self protection, was lower than average (amounting to 5 points), with the use of masks especially having the lowest average (1.7) points.

• Elastomers and Composites
• /
• v.43 no.3
• /
• pp.147-156
• /
• 2008

In this work, epoxy/carboxyl-terminated butadiene acrylonitirile (EP/CTBN) composites were prepared by employing a reinforcing filler, silica treated with silane coupling agent in different ratio by dry and wet method. Their curing characteristics, surface free energy, interface morphologies and mechanical properties such as tensile strength and impact resistance were carefully investigated. Differential scanning calorimetry(DSC) results showed that curing temperature was lowered with the increase of silane coupling agent because of the increase of relative curing agent cotent by filling the pores of silica. Wet method was proved to be more effective for lowering curing temperature of EP/CTBN composite. In general, surface free energy and impact resistance were increased with the increase of silane coupling agent in this work. Tensile strength, however, was observed to be decreased at 4 wt% of silane coupling agent. It was found that the dry method was proved to be preferable for pretreatment of silica with coupling agent.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.87-93
• /
• 2019

This work aims to develop a dry lubricant for oilless bush, especially a solid lubricant, thereby creating a coating method with improved properties of anti-friction and load-carrying capacity without oil lubrication. In this work, spherical-shaped powders of thermosetting resin such as polyimide (PI) are mixed with a binder matrix obtained by mixing a fluorocarbon compound resin such as Polytetrafluoroethylene (PTFE) or Ethylene tetra fluoro ethylene (ETFE) with itself or with a non-fluorocarbon thermoplastic resin such as Polyether ether ketone (PEEK). And these dry lubricant mixtures are thickly coated (200-300 mm in the thickness) on the inner surface of the bush by using a wet-typed air-spray deposition method. It was found that the load-carrying capacity of the solid lubricant for excavator bush (60 mm in diameter) that operates under a high load condition (at 40 MPa) is greatly improved owing to the spherical-shaped powders of thermosetting resin. In addition, the coefficient of friction at the sliding surface is also reduced less than 0.1. Thick coating also lowers the contact stress at the edge of a bush that results in better tribological performances. The result suggests that the lubrication performance and durability life of the bush can be remarkably improved even without lubrication (oil or grease).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.135-144
• /
• 2001

This study was performed to measure airborne dimethylformamide(DMF), methyl ethyl ketone(MEK) and toluene and their urinary metabolites concentrations and to determine the relationship between airborne and urinary concentration. Airborne samples and their urinary metabolites were measured 98 male workers who work for 8 synthetic leather factories in a portion of Kyoung-In area. Urine samples were collected at end-of-shift to estimate the exposure levels. 1. The concentration of airborne DMF by process was 8.81 ppm for wet-mixing, 15.05 ppm for wet-coating, 6.03 ppm for dry-mixing, 5.58 ppm for dry-coating, 5.37 ppm for printing, and 9.03 ppm for total. There was statistically significant difference by process. Urinary NMF concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were $90.55mg/{\ell}$, $79.80mg/{\ell}$, $39.86mg/{\ell}$, $25.23mg/{\ell}$, and $38.15mg/{\ell}$, respectively, and total geometric mean was $56.24mg/{\ell}$. There was significant difference by process. 2. The concentration of airborne MEK by process was 1.89 ppm for wet-mixing, 1.96 ppm for wet-coating, 10.33 ppm for dry-mixing, 29.24 ppm for dry-coating, 14.98 ppm for printing, and 4.87 ppm for total. There was statistically significant difference by process. Urinary MEK concentrations of wetmixing, wet-coating, dry-mixing, dry-coating and printing were $0.93mg/{\ell}$, $0.70mg/{\ell}$, $3.29mg/{\ell}$, $3.29mg/{\ell}$, and $1.06mg/{\ell}$, respectively, and total geometric mean was $1.25mg/{\ell}$. There was statistically significant difference by process. Urinary MEK 3. The concentration of airborne toluene by process was 0.35ppm for wet-mixing, 0.42ppm for wet-coating, 2.95ppm for dry-mixing, 11.67ppm for dry-coating, 4.88ppm for printing, 1.24ppm for total. There was statistically significant difference by process. Urinary hippuric acid concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were 0.24g/g creatinine, 0.21g/g creatinine, 0.34g/g creatinine, 0.52g/g creatinine, and 0.29g/g creatinine, respctively and total geometric mean was 0.28g/g creatinine. There was statistically significant difference by process. 4. No. of exceeded KPEL was 40 workers(40.8%) for DMF(10ppm), 1 worker(1.0%) for MEK(200ppm), and no worker for toluene(100ppm). No. of exceeded KBEI was 62 workers(63.3%) for urinary NMF($40mg/{\ell}$), 29 workers(29.6%) for urinary MEK, 1 worker(1.0%) for urinary hippuric acid. 5. The regression equations were Log(NMF)=0.4094*Log(DMF)+1.3587(r=0.4516) for DMF, Log(MEKU)=0.1859*Log(MEK)-0.0324(r=0.3303) for MEK, Log(HA)=0.2106*Log(Toluene)-0.5685(r=0.4497) for toluene. Synthetic leather factory workers expose to 3 kinds of organic solvents which are DMF, MEK and toluene. Their urinary NMF and MEK levels were higher than their concentration levels through respiratory. It seems that the urinary levels were affected skin absorption for working habit and alcohol intake.