• 생물환경조절학회지
• /
• 제4권2호
• /
• pp.125-130
• /
• 1995

동계 시설내 온도 및 광도가 고추의 생장에 미치는 영향을 알기 위하여 생장상내에서 인공적으로 온도 3수준(10, 20 및 3$0^{\circ}C$)과 광도 3수준(5, 15 및 25klux)을 7주간 조합 처리한 결과 나타난 생장반응은 다음과 같다. 1. 생장상내에서 고추 시묘의 초장, 엽면적 및 건물중의 생장은 3$0^{\circ}C$$\times$25klux 처리구에서 가장 양호했고, 각 온도에서도 광도의 증가에 따른 생장의 증가반응이 뚜렷하였다. 2. 처리후 7주째의 생장량을 multiple regression polynomial로 수식화한 결과 초장, 엽수, 엽면적, 경건물 및 지하부 건물중은 수식고정이 적합하였다. 3. 지상부 건물중에 대한 다중 회귀식을 광도와 온도로 편미분한 이론치를 이용하여 단위온도 증가에 대한 단위광도의 향상도와 단위광도 증가에 대한 단위온도 증가의 반응표면을 도식화한 결과 저온화에서의 광도증가는 지상부 건물중 증가반응의 향상도를 크게 높였으나, 광도 10k1ux이하나 온도가 2$0^{\circ}C$이상에서는 온도의 역할이 더 크게 나타났다. 단위광도 증가에 대한 온도반응의 증가에서도 동일한 경향으로 나타나 온도와 광도의 강한 상보성을 나타내었다.

• 한국지반공학회논문집
• /
• 제32권2호
• /
• pp.53-62
• /
• 2016

흙의 다짐 특성에 영향을 주는 주요인자 중 하나인 온도는 지역과 계절에 따라 다양하게 변화하는 특성을 가진다. 최근 동토지방에서 많은 토목공사가 시행되고 있지만, 온도와 관련된 흙의 다짐기준 및 지침을 정량화할 수 있는 문헌은 미비한 실정이다. 따라서 본 연구는 온도에 따른 흙의 다짐특성을 시험을 통해 평가하고자 하였다. 시험을 위해 러시아 시베리아, 캐나다 앨버타 주 오일 샌드 지역 등에서 자주 쓰이는 성토재료인 모래의 온도별 다짐특성을 나타낼 수 있는 주문진 모래를 사용하였으며, 표준다짐시험을 흙의 다양한 온도조건($-10^{\circ}C$에서 $17^{\circ}C$)에서 수행하였다. 시험 결과 영상 온도에서는 다짐 시 벌킹 효과로 인해 흙 공시체의 부피 팽창이 발생하였으며, 그 범위는 0%~6%이였다. $0^{\circ}C$에서 $17^{\circ}C$까지 온도가 증가하면서 최대 부피(최소 건조단위중량)에 해당하는 함수비는 감소하였고, 최소 부피(최대 건조단위중량)에 해당하는 함수비는 온도가 증가함에 따라 약간 증가하였다. 영하 온도의 경우 함수비가 추가됨에 따라 건조단위중량은 지속적으로 감소하였다. 영하 온도에서는 벌킹이 발생하지 않았으며 물의 단위부피보다 얼음의 단위부피가 더 크기 때문에 흙 공시체의 부피가 증가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.345-348
• /
• 2009

Maintaining proper membrane humidity is crucial to ensure optimal operation of a PEMFC system. A gas-to-gas membrane humidifier is popular technology for external humidification of PEMFC reactant gases. Characteristics of heat and water transfer in shell-and-tube Nafion membrane humidifiers has been experimentally investigated for various dry side inlet temperature of membrane humidifier. The results show that heat flux decreases linearly with dry side inlet temperature of membrane humidifier. The water flux through the membrane varies nonlinearly with the temperature elevation.

• Journal of Microbiology and Biotechnology
• /
• 제8권4호
• /
• pp.412-415
• /
• 1998

The accumulation process of $Pb^{2＋}$ in an industrial strain of Saccharomyces cerevisiae proved to be temperature-dependent, and was quite similar to chemical adsorption at the initial stage of $Pb^{2＋}$accumulation. The initial $Pb^{2＋}$ accumulation rate increased from 11.4 to 46.2 mg $Pb^{2＋}$/g cell dry weight/day, in response to the increased temperature from $20^{\circ}C\;to\;50^{\circ}C$ while the maximal $Pb^{2＋}$ accumulation amount (175.8 mg $Pb^{2＋}$/g cell dry weight) was achieved at $30^{\circ}C$. The maximal $Pb^{2＋}$/ accumulation amount with temperature was independent of ion exchange with $K^＋\;and\;Mg^{2+}$.

• Journal of Plant Biology
• /
• 제33권2호
• /
• pp.141-146
• /
• 1990

Germination and vegetative growth of Enteromorpha multiramosa Bliding from Pyoson, Cheju Island were investigated in laboratory under various combinations of temperature (5-$25^{\circ}C$) and salinity (8-48$^{\circ}C$). Percent level of germination was relatively high at all combinations of the two factors. The highest value among the combinations was revealed at 15$^{\circ}C$ and 32$\textperthousand$. Dry weight also was fairly high at all levels of combination with maximum value at 2$0^{\circ}C$ and 32$\textperthousand$. Analysis of variance for germination and growth was completed respectively and polynomial prediction models were constructed. F ratio revealed that all factors had a significant effect (p<0.001) on percentage of germination and dry weight, and their interactions also were significant (p<0.001), although the F ratio of interactions was far less than that for either the separate effect of temperature or salinity. Response surface of polynomial equation represented that temperature influenced less than salinity on germination, while it effected remarkably on vegetative growth, so the Enteromorpha multiramosa was kept to visible macrothalli from winter to spring in Cheju Island.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.46-58
• /
• 1984

This study was carried out to investigate the compressive strength and the other effects varying to seasons and curing days on the wet curing conditions of the plain concrete. The results obtained are summarized as follows; 1. The longer the wet curing days and the higher the temperature, the greater the compressive strength was expected. 2.。$_2$8, compressive strength of concrete at 28 days under the dry curing conditions showed a range in 64-76% of that under the wet curing conditions. 3. The seasonal variations in the compressive strength under the wet curing showed in order of summer>spring=autumn>winter, and that under the dry curing were in order of spring ≒autumn> summer> winter. 4. In order to obtain 90% of the design compressive strength, 7 days in spring or autumn and 2 weeks of the wet curing in summer were required. 5. The compressive strength of concrete under the wet curing by using wet straw bag cover was almost the same as that of water curing method. 6. Under the wet curing conditions, the higher the temperature, the greater the effect of the curing of concrete was obtained, however, the compressive strength of concrete was decreased under relatively higher (over 15$^{\circ}$ C) and lower temperature (below 4$^{\circ}$C). 7. Freezing damage was occured when temperature was below 0$^{\circ}$ C and humidity was relatively high. 8. A considerable differnce between estimation of $^{\circ}$$_2$8 from $^{\circ}$7 and measured one was appeared in case of the dry curing conditions. Oregon formula was appeared to be acceptable under the wet curing conditions. 9. In relationship between $^{\circ}$$_2$8 and $^{\circ}$7~, $^{\circ}$28=1. 52 $^{\circ}$7 under the wet curing conditions except winter season, and $^{\circ}$$_2$8 =(1.39-1, 48)$^{\circ}$7 under the dry curing conditions were shown.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.249-258
• /
• 2010

Recently, many utilities have considered interim dry storage of spent nuclear fuel as an option for increasing spent fuel storage capacity. Foreign nuclear regulatory committees have provided some regulatory and licensing requirements for relatively low- and medium-burned spent fuel with respect to the prevention of spent fuel degradation during transportation and interim dry storage. In the present study, the effect of cladding creep and hydride distribution on spent fuel degradation is reviewed and performance tests with high-burned Zircaloy-4 and advanced Zr alloy spent fuel are proposed to investigate the effect of burnup and cladding materials on the current regulatory and licensing requirements. Creep tests were also performed to investigate the effect of temperature and tensile hoop stress on hydride reorientation and subsequently to examine the temperature and stress limits against cladding material failure. It is found that the spent fuel failure is mainly caused by cladding creep rupture combined with mechanical strength degradation and hydride reorientation. Hydride reorientation from the circumferential to radial direction may reduce the critical stress intensity that accelerates radial crack propagation. The results of cladding creep tests at $400^{\circ}C$ and 130MPa hoop stress performed in this study indicate that hydride reorientation may occur between 2.6% to 7.0% strain in tube diameter with a hydrogen content range of 40-120ppm. Therefore, it is concluded that hydride re-orientation behaviour is strongly correlated with the cladding creep-induced strain, which varies as functions of temperature and stress acting on the cladding.

• 지구물리와물리탐사
• /
• 제21권4호
• /
• pp.220-230
• /
• 2018

상온 환경에서 PEDB (Portable Electronic Divided Bar) 시스템을 이용하여 암석의 열전도도를 측정할 경우 실내온도 변화에 영향을 받는다. 따라서 온도와 습도를 일정하게 조절할 수 있는 항온항습기 내에서 열전도도를 측정하면 상온 환경에서 측정할 때의 단점을 보완할 수 있다. 이 연구에서는 항온항습 상태에서 열전도도를 측정할 수 있는 시스템을 구축하여, 울릉도의 GH3, GH4 시추공에서 채취된 45개 시편에 대해 항온항습기 내에서 건조 및 수포화 열전도도를 측정하고 그 특성을 살펴보았다. 또한, 16개 시편에 대해 밀도 및 유효공극률을 측정하여 열전도도와의 상관관계를 분석하였다. 열전도도와 유효공극률 및 밀도의 상관성 분석결과, 수포화 시료보다는 건조시료에서 보다 높은 상관성을 보였으며, 특히 "수포화/건조 열전도도비"는 유효공극률과 매우 높은 상관성($R^2=0.90$)을 보였다.

• 비파괴검사학회지
• /
• 제31권3호
• /
• pp.278-286
• /
• 2011

The on-line monitoring for the wall thinning in secondary system has been considered one of main issues for the safety of nuclear power plants. To establish the on-line monitoring technique for the pipe wall thinning, the development of the ultrasonic transducer working in high-temperature is very important. In this investigation, the magnetostrictive transducer is concerned for high temperature condition up to $300^{\circ}C$. The magnetostrictive transducer has many advantages such as high working temperature, durability, cost-effectiveness, and shear waves, most of all. A thin Fe-Co alloy patch whose Curie temperature is over $900^{\circ}C$ was employed as a ferromagnetic material for magnetostriction. Wave transduction experiments in various temperature were carried out and the effect of bias magnets was considered together with the dry coupling performance of the transducer. From experimental results, consequently, it was found that the magnetostrictive transducer works stable even in high temperature up to $300^{\circ}C$ and can be a promising method for the on-line monitoring of the wall thinning in nuclear power plants.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.34-39
• /
• 2011

This paper presents a novel direct fabrication method of the thin metal film RTD temperature sensor array on an arbitrary curved surface by using MEMS technology to measure a distributed temperature field up to $300^{\circ}C$ without disturbing a fluid flow. In order to overcome the difficulty in the three dimensional photography of sensor patterning, the UV pre-irradiated photosensitive dry film resist technology has been developed newly. This method was applied to the fabrication of the temperature sensor array on a glass tube, which is arranged parallel and transverse to a main flow. Gold was used as a temperature sensing material. The resistance change was measured in a thermally controlled oven by increasing the environmental temperature. The linear increase in resistance change and a constant slope were obtained. Also, the sensitivity of each RTD temperature sensor was evaluated.