• Earthquakes and Structures
• /
• 제24권3호
• /
• pp.205-215
• /
• 2023

Currently, many studies are underway at home and abroad on the seismic performance evaluation and dry construction method of the masonry structure. In this study, a dry stack masonry wall system without mortar using concrete blocks is proposed, and investigate the seismic performance of dry filling wall frames through experimental studies. First, two types of standard blocks and key blocks were designed to assemble dry walls of concrete blocks. And then, three types of experiments were manufactured, including pure frame, 1/2 height filling wall frame, and full height filling wall frame, and cyclic load experiments in horizontal direction were performed to analyze crack patterns, load displacement history, rebar deformation yield, effective stiffness change, displacement ductility, and energy dissipation capacity. According to the experimental results, the full height filling wall frame had the largest horizontal resistance against the earthquake load and showed a high energy dissipation capacity. However, the 1/2 height filling wall frame requires attention because the filling wall constrains the effective span of the column, limiting the horizontal displacement of the frame. In addition, the concrete block was firmly assembled in the vertical direction of the wall as the horizontal movement between the concrete blocks was allowed within installation margin, and there was no dropping of the assembled concrete block.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.203-210
• /
• 2019

최근 한반도에 발생하는 지진으로 인해 조적조 건물에 대한 피해가 많이 발생하고 있어 이에 대한 성능평가 연구가 활발히 진행되고 있다. 또한 조적조 건축은 일반적으로 습식공사로 수행되어 온도에 영향을 받기 때문에 시공의 효율성이 떨어지는 단점이 있다. 본 연구에서는 모르타르를 사용하지 않고 콘크리트블록을 조립하여 벽체를 완성하는 건식조적공법을 제안해 보고 이를 실험과 해석연구를 통해 그 성능을 평가하고자 한다. 콘크리트블록 벽체의 성능을 평가하기 위해 건식조립벽체의 프리즘 압축강도, 직접 전단강도, 대각선 인장강도 실험을 수행하였고, ABAQUS FEM 해석을 통해 단면형상의 적정성을 검토하였다. 연구수행결과 모르타르를 사용하지 않고 콘크리트블록을 조립하는 건식 콘크리트블록 벽체의 압축강도와 대각선 인장강도가 일정 강도 이상을 발휘할 수 있음을 알 수 있었고, 특히 키블록의 H형 모듈이 전체 콘크리트블록의 전단키 역할을 하여 건식 콘크리트블록으로 전단강도 성능이 우수함을 알 수 있었다. 또한 주블록의 형상과 두께가 각각의 강도성능에 주된 영향을 주고 있어 최적형상과 제안된 건식공법의 현장시공성이나 내진성능에 대한 연구를 통해 현장에서 습식공법을 대체할 수 있는 공법으로 적용할 수 있을 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.