• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.606-611
• /
• 2007

This study was conducted to beneficiation of magnesite by dry grinding and air classification. The raw ore was ground in a ball mill and pin mill controlled with grinding time and linear velocity of grinding media and fractionated in an air classifier. Pin mill is more efficient than the ball mill for liberation. As a result, the MgO grade of concentrate was 47.1% with recovery of 51.51% for classified with 3,000rpm of air classifier for ground at 13,000rpm in pin mill.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.71-75
• /
• 1999

Power consumption, mesh size, moisture content, color difference, amylogram of rice flour milled with water soaked rice were compared with that of rice using dry pin mil process. Maximum water absorbance of rice was 35% for 2.5 hr. Power consumption to mill the soaked rice was less than of dry rice by 6.9kW/100Kg. Moisture content of rice flour from the water soaked rice was 2% higher than that of rice flour from dry rice. Population of flour particle was 52.9% of 60 mesh and 32.6% of 60∼80mesh. Gelatinization temperature of rice flour from the water soaked rice was 30C lower than that of rice flour from dry rice. Maximum and minimum viscosity of rice flour from the water soaked rice after boiling were 296 cps and 158 cps, independently. Brightness and whiteness of the rice flour from the water soaked rice were increased upto 10hr soaking and decreased after 17hr soaking. Brightness and whiteness of the rice flour were 96.17 and 96.02, independently.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.221.2-222
• /
• 2003

The relative retrogradation of Jeungpyun investigated with different millimg methods of rice flour. The relative retrogradation of Jeungpyun was reduced in order that of W-C, W-P, D-M, D-J in DSC(Differential Scanning Calorimetry) method while W-C, D-M, D-J, W-P in Diastase method. In wet milling method, the relative retrogradation of Jeungpyun by Pin mill(W-P) was lower than Jeungpyun by colloid mill(W-C). In dry milling method, the relative retrogration of Jeungpyun by jet mill(D-J) was lower than Jeungpyun by micro mill(D-M). The relative retrogradation of Jeungpyun by DSC method was similar to the Diastase method. The relative retrogradation of Jeungpyun was decreased with decreasing particle size and setback value for amylogram and increasing damaged starch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1797-1801
• /
• 2011

Two brown rice samples differing in amylose content, 20.1 (normal) and 7.3% (low amylose) were milled by different milling methods, and their physicochemical properties were tested. Particle size of brown rice flour prepared by dry milling using a pin mill (DM) was lower than that prepared by wet milling using a roll mill (WM). Particle size was further reduced by successive dry milling of the flour after wet milling and drying (WM/DM). Damaged starch contents in the wet milled brown rice flour were 14.6 and 15.6% for the normal and low amylose samples, respectively, whereas they were only 4.2 and 4.8% for the dry milled samples. WM/DM method resulted in a lower damaged starch (%) than DM, despite a reduced flour particle size. Water absorption index (WAI) of the brown rice flour was the lowest after WM/DM, and the water solubility index (WAI) was higher in the order of DM, WM/DM, and WM. Brown rice flour with normal amylose content appeared to have significantly higher pasting viscosities, as determined using a Rapid Visco Analyzer (RVA). Compared to dry milled brown rice flour, wet milled brown rice flour showed lower peak viscosity and higher final viscosity, resulting in increased setback value.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.76-80
• /
• 1999

Power consumption, mesh size, moisture content, color difference, amylogram of rice flour milled with the water soaked rice were compared with that of rice using dry pin mill process. The rice was soaked in 23, 24, 25, 26% of water for 10hr, independently. The more rice had moisture content, the less power consumption was needed. Power consumption to mill the rice soaked in 25% of water was less than that of dry rice by 6.8kW/100Kg. Moisture content of rice flour from the rice soaked with 25% of water was 2% higher than that of rice flour from the rice soaked with 23% of, water. Population of flour particle from the rice soaked with 24-25% of water was 45.7∼46.25 of 60 mesh, 9.7∼10.4% of 80∼100 mesh and 7.7∼8.1% of 100 mesh. Gelatinization temperature of rice flour from the rice soaked with 23% and 24∼25% of water was 65.70C and 64.50C, independently. Temperature of rice flour from the rice soaked with 23% 24∼25% of water sith minimum viscosity was 85.50C and 88.4∼88.70C, independently. Brightness and whiteness of the rice flour from the rice soaked with 24∼25% of water were 95.90∼95.95 and 905.82∼95.94, independently. Brightness and whiteness of the rice flour from the soaked rice were 1.2 and 1.7 higher than that of rice flour from the dry rice, independently.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.690-696
• /
• 1995

Properties of dry milled rice flours made of paddy with different moisture content (12.6, 18.4 and 24.4%) were compared with those of wet milled rice flour. Among dry milled rice flour, the higher moisture content of paddy the finer particle size and the more distinct shape of starch were observed. As the moisture content of paddy increased, L (lightness) value and water absorption index of rice flour were increased, while setback in amylogram and water soluble index were decreased. Lower gel consistency and gel strength were found in dry milled rice flours than in wet milled rice flour, while no significant difference was found among dry milled rice flours. Enthalpy for melting crystalline of retrograded gels was higher in dry milled rice flours made of paddy with 24.4% moisture content than in other dry milled rice flours. Wet milled rice flour had lower retrogradation enthalphy than dry milled rice flours.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.541-545
• /
• 1993

Two different methods (Sieve shaker, Elzone particle size analyzer) were used to investigate rice flour particle size obtained by various milling method. Results of Elzone particle size analyzer were more effective than Sieve shaker in determining particle size, and the distribution of particle size of rice flours was affected by the type of the milling methods used. A rice flour, prepared in a Pin mill had a particle size range of $60{\sim}500$ mesh, and 30.38% of the sample was in the particle size range $200{\sim}270$ mesh. A rice flour, prepared in a Colloid mill had a particle size range of $40{\sim}500$ mesh and more of flour particles appeared in the range $140{\sim}200$ mesh than any other particle size. A rice flour, prepared in a Micro mill had a particle size range of $140{\sim}500$ mesh, and 41.62% of the sample was in the particle size range over 500 mesh. A rife flour, prepared in a Jet mill had a finer flour particle size was over the particle size range 500 mesh. The finer rice flour gave the highest L value and the lowest a value. The wet-milled flour particles were observed as a cluster of starch granules and the particles of rice flour (dry-milling) were observed as fragment of rice grains. Scanning Electron Photomicrographs revealed that visual differences in structure between milling methods, and similar results with Elzone particle size analyzer method in particle size.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.834-838
• /
• 1995

The relative retrogradation of Jeungpyun investigated with different milling methods of rice flour. The relative retrogradation of Jeungpyun was reduced in order that of W-C, W-P, D-M, D-J in DSC(Differential Scanning Calorimetry) method while W-C, D-M, D-J, W-P in Diastase method. In wet milling method, the relative retrogradation of Jeungpyun by pin mill (W-P) was lower than Jeungpyun by colloid mill (W-C). In dry milling method, the relative retrogration of Jeungpyun by jet mill (D-J) was lower than Jeungpyun by micro mill(D-M). The relative retrogradation of Jeungpyun by DSC method was similar to the diastase method. The relative retrogradation of Jeungpyun was decreased with decreasing particle size and setback value for amylogram and increasing damaged starch.

• Korean journal of food and cookery science
• /
• v.11 no.3
• /
• pp.213-219
• /
• 1995

The characteristics of Jeungpyun were investigated with different milling methods of rice flour. The moisture content of Jeungpyun was similar to that of the rice flours. In the color of Jeungpyun, L-value was increasing but a and b-value were decreasing as its moisture content was increasing. The analysis on the texture of Jeungpyun showed that Jeungpyun by dry milling indicated the higher value in hardness and the lower value in springiness, cohesiveness and chewiness than Jeungpyun by wet milling. The test of the sensory characteristics for Jeungpyun showed that whiteness, moistness, springiness and chewiness was higher for Jeungpyun by wet milling. But the softness was lower. Overallquality of Jeungpyun by wet milling was higher than Jeungpyun by dry milling. Generally, Jeungpyun prepared by Pin-mill was the best in quality. In particular, Jeungpyun by wet milling was better for the added 80％ of water and Jeungpyun by dry milling was better for the added 100％ of water.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.313-319
• /
• 2015

This study relates to an investigation into semi-dry manufacturing process of BP sludge based on non-heating production method. In this study, we conducted a research into reduction of water content ratio which arose from mixture of BP by-products of high water content ratio(50% or higher) with industrial by-products to use such BP by-products as construction materials in large quantity. We measured the reduction rate of water content ratio at the feeding ratio of water content reduction agent(1:0.5) in BP by-products. The results showed that water content ratio was the lowest with 18.5% in the mixture of PA+CFA(1:0.5). Moreover, water content ratio ranged between approximately 9.2% and 11.4% at the age of 1 day to 2 days at the aging temperature of $20-30^{\circ}C$, suggesting that the water content ratio was in the range within 10% which was a level suitable for use as construction material in this study. Meanwhile, we compared and evaluated the physical properties of non-heated BP by-products based on post-aging pulverization method. The results showed that there was no significant difference, depending on pulverization method. When production efficiency and economic feasibility were taken into consideration, it was found desirable to use fine particle pulverizer or pin mill enabling continuous production.