• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.380-386
• /
• 2001

Dry matter(DM) accumulation in different plant parts of two Vigna spp., blackgram(Vigna mungo) and mungbean(Vigna radiata), was compared at different levels of salinity. Two vaarieties of each of blackgram (Barimash-1 and Barimash-2) and mungbean(Barimung-3 and Barimung-4) were grown with 50, 75 and 100mM NaCl solutions and tap water as a control till maturity. The DM accumulation in all plant parts of the two crops devreased with the increasing salinity levels. The reducation was severe in mungbean compared to blackgram. On an average mungbean produced only 3% grain yield compared to 37% in blackgram at 100mM NaCl. The salinity induced growth reduction was relatively less in Barimash-2 than that in Barimash-1. In mungbean, the relative DM production of Barimung-3 was greater than Barimung-4. The extent of biomass reducation due to salinity in different plant parts was not similar. At maturity the rank of biomass accumulation (at 100 mM NaCl) in different plant parts of blackgram was in decreasing order by seeds pod$^{-1}$ (97%), branch plant$^{-1}$ (88%), 1000-grain weight (79%), plant height(72%), pods plant$^{-1}$ (50%), leaf weight and root mass(both 49%) and stem weight (48%). In mungbean, the rank was in decreasing order by 1000-grain weight (57%), leaf weight (54%), plant height (52%), seeds pod$^{-1}$ (50%), branch plant$^{-1}$ (41%), root weight (34%), stem weight (24%) and pods plant$^{-1}$ (6%). Therefore, salinity reduced grain yield more than straw and roots of the Vignaq spp., and blackgram is relatively more salt-tolerant than mungbean.

• Journal of Mushroom
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2021

The choice of the culture medium is an important factor for the mass production of mycelia in submerged cultures. The influence of liquid medium on the mycelial dry weight of Paecilomyces tenuipes was investigated in this study. The regression equation is expressed as Y=-1292.94187+17.78612X1+18.92425X2+2.11464X3-0.019375X1X2-0.006276X1X3+0.008177X2X3-0.070169X12-0.292175X22-0.008818X32, where Y represents the value of the mycelial dry weight (g/L), X1 is the particle size of wood sawdust in liquid medium (mesh), X2 is the concentration of the wood sawdust in liquid medium, and X3 is incubation time (h). The medium was optimized using a response surface methodology, and the optimal medium contained 30 g of wood sawdust (140 mesh), 20 g of glucose, and 10 g/L of peptone. Under these conditions, the mycelial dry weight reached 38.1 g/L (actual value). The culture medium containing wood sawdust is simple and easy to use, highly efficient, and eco-friendly, and its effectiveness in large preparations of P. tenuipes mycelia with low material costs has been demonstrated.

• Korean Journal of Plant Resources
• /
• v.33 no.1
• /
• pp.33-39
• /
• 2020

This study was carried out to provide basic information for mass breeding and cultivating the saplings of Camellia japonica. The germination rates did not show definite tendency according to the changes of seed weight at room temperature and 4℃ dry storage conditions. The germination rate of 4℃ wet sand storage was increased with seed weight, but showed very low germination rate for 120 days of storage. The germination rate was above 80% in 60 days, 90 days and 120 days, respectively, at 4℃ wet filter paper storage conditions. The average days taken for those germinations were about 30 days at room temperature and 4℃ dry storage conditions, but wet storage (sand, filter paper) condition took the shortly nearly 13 days for those germinations. Leaf number, leaf dry weight, stem diameter and root dry weight were higher than total average by more than 1.21 g for seed weight. Stem length was higher than the average by more than 1.01 g, plant dry weight was higher than the average by more than 0.81 g, and stem dry weight was higher than the average by more than 0.61 g. In the case of seed weight becoming heavier, seedling growth was good but T/R ratio tended to decrease. In order to increase the mass production of seedlings using Camellia japonica seeds, we need to specify the weight and size of those seeds. The 4℃ wet filter paper storage condition was evaluated as the most efficient method for the seed storage used for seeding.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.799-809
• /
• 2018

This study was performed to compare the physicochemical characteristics between imported dry-cured Hams from black and white pigs available in the domestic market. The black dry-cured hams contain higher moisture and ash contents than that of white hams, whereas the black dry-cured hams had lower fat contents than that of the black ones (p < 0.05). The hams from black ones had lower lightness ($L^*$) and yellowness ($b^*$) values than those from the white ones (p < 0.05). Moreover, the pH values and salt contents of the hams from the black ones were higher than those from the white ones (p < 0.05). Moreover, the black ones had a higher water holding capacity (WHC) than that of the white ones (p < 0.05). The thiobarbituric acid reactive substances (TBARS) values of the black ones were lower than those of the white ham samples (p < 0.05). For texture profile analysis, hardness, gumminess, chewiness, cohesiveness and shear force values were significantly lower in the black ones than in the white samples (p < 0.05). Saturated fatty acids in the white ones were higher than in the black ones, whereas unsaturated fatty acids in the black ones were higher (p < 0.05). Free amino acids such as aspartic acid and glutamic acid in the black ones were higher than in the white ones (p < 0.05). The shrinkage of muscle fiber was stronger in the white ones. Considering the meat quality parameters of ham, the black ones showed a superior meat quality. In general, this research can be used as fundamental information for the mass production of dry-cured hams in Korea.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.58-68
• /
• 2001

This study was carried out to investigate the growth and biomass production of Abies koreana seedlings under different relative light intensity. The 5-year-old potted seedlings were grown for 24 months under different light intensity of 100%, 50%, 30%, 10% and 2% of the natural full light intensity. The results were as follows: 1. Height growth was similar in the seedlings under different light intensities except in 2% of the full sun light intensity, having shown the lowest height growth. 2. Root collar diameter growth was reduced gradually by decreasing of the relative light intensity. 3. The seedlings which were grown under relatively low light intensity showed the later starting date of the stem growth in the next spring and showed the smaller number of new needles, and the smarter number and the shorter length of new shoot of the seedlings. 4. Total dry mass including the dry mass of leaves, shoot and root was reduced by decreasing of the relative light intensity. 5. In case of the seedling grown in one year shading condition, the ratio of the dry mass of current-year needles and stem to that of the above one-year-old needles and stem was ranged from 0.99$\pm$0.25 to 1.06$\pm$0.06 and was not significally different among the seedlings grown under 100%, 50% and 30% of the relative light intensity. And the radio was ranged from 0.60$\pm$0.04 to 0.52$\pm$0.03 in the seedlings grown under 10% and 2% of the relative light intensity, respectively. In case of the seedling grown in two years shading, the ratio of the dry mass of current-year needles and stem to that of the above one-year-old needles and stem was ranged from 0.79$\pm$0.04 to 1.00$\pm$0.03 and was not significally different among the seedlings grown under 100, 50, 30% and 10% of the relative light intensity. And the ratio was 0.29$\pm$0.03 in the seedlings grown under 2% of the relative light intensity, respectively. 6. T/R ratio of the seedlings grown in one year shading condition was ranged from 3.35$\pm$0.33 to 4.61$\pm$0.25 and was not significantly different among the relative light intensities of 100%, 50%, 30% and 10%. The seedlings grown under 2% of relative light intensity showed the highest T/R ratio of 7.36$\pm$0.15. In case of the two years shadings the T/R ratio was ranged from 1.76$\pm$0.11 to 3.12$\pm$0.19 and increased as relative light intensity decreased except 2.01$\pm$0.14 in 2% of relative light intensity.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2002

The study was carried out to determine the growth and biomass production of major deciduous trees including Betula platyphylla var. japonica, Betula schmidtii, Zelkova serrata, Acer mono, Prunes sargentii, and Ligustrum obtusifolium subjected to artificial shade treatment in nursery field. The six deciduous trees seedlings grow for 2 years under different light intensity of 100%, 38-62%, 22-28%, 7-20%, and 2-6% of the full sun light intensity. The results were as follows; In the seedling heights and root collar diameters of shade intolerant species like Betula platyphylla var. japonica and Betula schmidtii, the relative growth rates of seedlings grown in full sun showed 2 times as compared with those subjected to the shade treatment of 2-6% light intensities of full sun. In the shade tolerant species like Acer mono ant Ligustrum obtusifolium, the growth performances were better in the seedlings grown in 38-62% light intensities of full sun. Total dry mass including the dry mass of leaves, shoot and root were as a whole decreased with shade treatment. The ratio of the dry mass of leaves and stem increased the dry mass of root. T/R ratio of the seedlings increased by decreasing the relative light intensity. And the T/R ratio of 2-6% light intensities of full sun was ranged from 1.1~5.0 were greater in the full sun light was ranged from 0.6~3.2. Light intensity by artificial shade treatment decreased in deciduous trees when compared on the whole, it showed tendency that SLA increases, increased that seeing resemblant tendency in LAR and LWR and changed of light intensity is strong, it increased that showed difference as statistical. But, LWR of Betula platyphylla var. japonica increased gradually and showed tendency that decreases rapidly in the shade treatment of 2-6% light intensities of full sun. This result is thought that biomass production decreased by shading treatment influenced in physiological characteristics such as leaf area and decrease of the leaf amount.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.421-427
• /
• 2015

Angelica gigas Nakai is one of the most widely used herbal medicines and is known to have many pharmaceutical effects including an anti-oxidant, anti-cancer etc. This study was carried out to investigate an effect of fertilization on leaf yield, production of dry-matter and accumulation of pyranocurmarine compounds such as decursin (DE) and decursinol angelate (DA) in Angelica gigas Nakai. Effect of fertilization was determined from response surface regression equation composing of 2 by 3 factorial arrangement of urea, sodium dihydrogen phosphate and potassium chloride. Yield of leaf in Angelica gigas Nakai significantly increased until 100 days after transplanting. Production of leaf also tended to increase with increasing nitrogen fertilization. Model of regression equation showed that leaf production depended upon nitrogen ($Pr>{\mid}t{\mid}$ : 0.087, 0.256 and 0.079). Also, statistical results between nitrogen application level and production of dry-matter showed significant relationship (p<0.05) and contents of dry-matter was highest in 10 kg 10a-1 treatment on 24 Sep. Active compound isolated and purified from leaf and root of Angelica gigas Nakai was identified as DE and DA by gas chromatograph-mass spectrophotometry (GC-MS). Concentration of DA as prevalent compound in leaf was highest on 20 Aug. but decreased on 24 Sep. Amount of DE and DA accumulated in Angelica gigas Nakai significantly increased with growth stages and nitrogen level. The result of our investigation imply that nitrogen fertilization is important factor for production of leaf and accumulation of pyranocurmarine in Angelica gigas Nakai as a medicinal/food materials.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.1922-1929
• /
• 2007

A simple whole-cell-based sensing system is proposed for determining the cell mass of H. pluvialis using ultraviolet fluorescence spectroscopy. An emission signal at 368 nm was used to detect the various kinds of green, green-brown, brown-red, and red H. pluvialis cells. The fluorescence emission intensities of the cells were highest at 368 nm with an excitation wavelength of 227 nm. An excitation wavelength of 227 nm was then selected for cell-mass sensing, as the emission fluorescence intensities of the cell suspensions were highest at this wavelength after subtracting the background interference. The emission fluorescence intensities of HPLC-grade water, filtered water, and HPLC-grade water containing a modified Bold's basal medium (MBBM) were measured and the difference was less than 1.6 for the selected wavelengths. Moreover, there was no difference in the emission intensity at 368 nm among suspensions of the various morphological states of the cells. A calibration curve of the fluorescence emission intensities. and cell mass was obtained with a high correlation ($R^2=0.9938$) for the various morphological forms of H. pluvialis. Accordingly, the proposed method showed no significant dependency on the various morphological cell forms, making it applicable for cell-mass measurement. A high correlation was found between the fluorescence emission intensities and the dry cell weight with a mixture of green, green-brown, brown-red, and red cells. In conclusion, the proposed model can be directly used for cell-mass sensing without any pretreatment and has potential use as a noninvasive method for the online determination of algal biomass.

• Mass Spectrometry Letters
• /
• v.14 no.2
• /
• pp.42-47
• /
• 2023

Carthamus tinctorius L. (known as safflower) is a valuable oil plant whose importance is increasing rapidly in the world due to its high adaptation to arid regions. The seeds of this unique plant are especially used in edible oil, soap, paint, varnish and lacquer production. Its flowers are used in vegetable dye production and medicinal purposes beside its features as a coloring and flavoring in food. After the oil is removed, the remaining pulp and plant parts are used as animal feed, and dry straw residues are used as fuel. Beside all these features, its usage as a herbal medicinal plants for various diseases has gained importance on recent years. In this study, it was designed a plant metabolomic approach which transfers all the recent data processing strategies of untargeted metabolomics in clinical applications to the present study. Q-TOF LC/MS-based analysis of the extracts (70% ethanol, hexane, and chloroform) for both seed and flowers was performed using a C18 column (Agilent Zorbax 1.8 µM, 100 × 2.1 mm). Differences were observed in seed and fruit extracts and these differences were visualized using principal component analysis (PCA) plots. The total number and intersections of the peaks in the extracts were visualized using peak count comparison graph. Based on the experimental results, the number of the detected peaks for seeds was higher than the ones for the flowers for all solvent systems to extract the samples.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.84.1-84.1
• /
• 2010

Currently, new and renewable energy come into the spotlight, such as solar energy, wind power, fuel cell, hybrid car etc., due to the energy resource is being depleted. Especially, in order to solve like this problem, the study of solar cell manufacturing systems are being extensively researched such as vacuum process. But the major fault of the vacuum process are its expensive production price. On the order hand, Roll-to-roll printing system, the new technology of solar cell manufacturing, has low production price compare with the vacuum process. Also roll-to-roll printing system can decrease the 95% of waste water and 99.9% of harmful gasses than the vacuum process. So we addressed the roll to roll printing system for the flexible solar cell by using printing technology. This roll-to-roll printing system is comprised of various modules, such as web handling module, fine pattern printing module, dry/curing module, uniform coating module and laminating module etc.