• 한국농공학회지
• /
• 제40권6호
• /
• pp.79-88
• /
• 1998

This study was conducted to measure the moisture content of soil using RF impedance in the range of 1 to 30MHz. Considering the water potential flow in the soils, two types of sensor such as parallel cylinder and perpendicular plate type were fabricated and tested. The capacitance and resistance of sonsors for soil samples having moisture content range of 2 to 27% were measured by Q-meter (HP4342). The higher soil moisture content was and the larger soil bulk density was, the more the capacitance of sensors increased. To eliminate the effect of bulk density on measuring soil moisture content using RF impedance, two kinds of model having the density independent functions such as the ratio of capacitance change to conductance change and weight of water and dry soils respectively were developed and estimated by regression analysis.

• 설비공학논문집
• /
• 제12권6호
• /
• pp.599-608
• /
• 2000

One dimensional numerical modeling was carried out for the melting behavior of dry snow and the unsaturated flow when heat was supplied from the bottom surface. Discrepancy between the previous experimental data and the present numerical results is substantially reduced by considering the density change of water permeation layer due to the infiltration of meltwater. In the parametric study for effective thermal conductivity, it was found that the effect of this parameter to the behavior of snow melting is minor. Sensitivity analysis showed that the melting time is most sensitive to changes in supplied heat flux, snow temperature, and bulk density, whereas snow bulk density and residual saturation have a significant effect on the height of water permeation layer in snow.

• 한국토양비료학회지
• /
• 제22권3호
• /
• pp.221-227
• /
• 1989

토성(土性)이 다른 두 토양(土壤)의 압밀상태(壓密狀態)가 대두(大豆)의 근생장특성(根生長特性)과 양분(養分)의 흡수기능처리(吸收機能差異)를 알아보기 위하여 용적밀도(容積密度)와 수분상태(水分狀態)를 달리한 Core에서의 유근신장(幼根伸長)과 용적밀도(容積密度)를 달리하여 pot재배(栽培)하였을 때 근(根)의 총(總)길이와 표면적(表面積), 근반경(根半徑) 및 양분(養分)의 흡수속도(吸收速度)를 조사(調査)한 결과(結果) 다음과 같다. 1. 대두(大豆)의 유근신장(幼根伸長)은 용적밀도(容積密度)가 낮을수록 빨랐으며 양토(壤土)에서는 토양수분(土壤水分) 상태(狀態)가 - 4bar 이하(以下)에서, 사양토(砂壤土)에서는 - 1bar 이하(以下)에서 급격(急激)히 감소(減少)하였다. 2. 유근(幼根)의 신장(伸長)은 ELE경도계(硬度計) 토양강도(土壤强度) 2.0 이상(以上)에서 급격(急激)히 감소(減少)하였으며, 근신장속도(根伸長速度)와 토양강도간(土壤强度間)에는 2차식(次式)으로 표시(表示)되었다. 그러나 사양토(砂壤土)에서 -10bar이하(以下)의 토양수분상태(土壤水分狀態)에서는 경도(硬度)에 관계(關係)없이 근신장속도(根伸長速度)가 낮았다. 3. pot재배시험(栽培試驗) 결과(結果), 뿌리의 총(總)길이는 용적밀도(容積密度)가 $1.2g/cm^3$인 양토(壤土)에서 가장 길었으며, $1.4g/cm^3$인 사양토(砂壤土)에서 가장 짧았다. 세근(細根)의 평균직경(平均直徑)은 사양토(砂壤土)에서 생육(生育)한 것이 양토(壤土)에서 생육(生育)한 것보다 굵었다. 뿌리의 총표면적(總表面積)은 용적밀도(容積密度)가 낮을수록 넓었으며, 양토(壤土)에서 사양토(砂壤土)보다 넓었다. 4. 양분(養分)의 흡수량(吸收量)은 건물생산(乾物生産)이 많은 양토(壤土)에서 많았다. 단위(單位)뿌리표면적당(表面積當) 흡수속도(吸收速度)는 질소(窒素)가 양토(壤土)에서 $597{\sim}753n\;mole/day{\cdot}cm^2$, 사양토(砂壤土)에서 $222{\sim}365n\;mole/day{\cdot}cm^2$이었으며, 용적밀도(容積密度)가 높은 토양(土壤)에서 높은 값을 보였다. K는 $99{\sim}175n\;mole/day{\cdot}cm^2$ P는 $26{\sim}46n\;mole/day{\cdot}cm^2$이었고, Ca와 Mg는 각각(各各) $175{\sim}230n\;mole/day{\cdot}cm^2$, $163{\sim}205n\;mole/day{\cdot}cm^2$의 범위(範圍)를 보였으며 토양간(土壤間)의 차이(差異)는 질소(窒素)보다 적은 경향(傾向)이었다.

• 한국수산과학회지
• /
• 제29권5호
• /
• pp.663-676
• /
• 1996

한국 남동해역의 사질퇴적물의 물리적 성질 분포는 수심과 해류의 영향이 큰 것으로 나타났다. 수심 80m를 전후하여 잔류퇴적물인 muddy sand가 분포하고 모래함량은 $60\%$ 이상이며 수직적인 조직 및 물성변화는 별로 크지 않다. 표층퇴적물의 수평분포의 경우 평균입도는 한반도 동남해역과 대마도 중간선에서 가장 조립질로 나타나며 이와 완전히 일치하지는 않지만 전밀도의 경우도 중앙부가 높게 ($1.80g/cm^3$ 이상) 분포한다. 공극율과 함수율의 경우는 전밀도의 분포와 반대로 대한해협의 중심부 부근이 낮고 한반도나 대마도 쪽이 높은데 이는 평균입도 분포에서도 볼 수 있듯이 세립질 퇴적물 성분의 증가와 연관되어 있다. 또한 대마해류의 주 통로를 중심으로 북서-남동 방향으로 증가하는 양상이 뚜렷하게 관찰된다.

• Journal of Microbiology and Biotechnology
• /
• 제12권5호
• /
• pp.740-745
• /
• 2002

The current study was conducted to identify the differences in the rheological properties of Chlorella sp. powder cultured in a fermentor and in a pond-like environment. Cells. cultured in the same media were harvested and spray dried. The biomass yield from the fermentor culture was 4.7% (dry basis), while that from the pond was 4.3% (dry basis). Measurements of the loose bulk density, tapping test, Hausner's ratio, and compressibility test all revealed differences between the rheological properties of the Chlorella sp. from the two cultivation systems. Although both the fermentor and pond cultured Chlorella sp. showed the same angle of repose, the mean size of the cells was 2.26 $\mu\textrm{m}$ and 2.89 $\mu\textrm{m}$, respectively. The weight of the Chlorella sp. tablets cultured in the fermentor and pond was 0.663 g/tablet and 0.593 g/tablet, respectively, while the friability of the tablets was 21% and 41%, respectively. Observation by Transmission Electron Microscope (TEM) showed that the cell wall of the Chlorella sp. cultured in the fermentor was thinner and more spherical than that cultured in the pond, thereby providing the main characteristic rheological properties of the powder.

• 한국조경학회지
• /
• 제42권6호
• /
• pp.50-59
• /
• 2014

이 연구는 식생모듈박스에 적용한 레플렉숨을 중심으로 식물 생육특성 간의 관계 및 식물의 생육특성과 토양 물리적 특성의 관계를 파악하기 위하여 수행하였다. 이 실험에서 토양 물리적 특성과 식물 생육특성의 관계에 관한 연구의 분석은 SPSS Ver 19.0 for Window용 통계프로그램을 이용하여, 상관분석과 다중회귀분석을 실시하였다. 토양 물리적 특성과 생육특성의 다중회귀 분석 결과, 레플렉숨에 대한 회귀식은 초장=$3.993-14.070^*$(용적밀도)+$.233^*$(고상)+$.038^*$(액상)+$.068^*$(침투율)로 나타났으며, 이 중 용적밀도와 고상이 유의성 있게 나타났다. 레플렉숨에 대한 회귀식은 초폭=$2.931-33.925^*$(용적밀도)+$.566^*$(고상)+$.206^*$(액상)+$.027^*$(침투율)이며, 이 중 용적밀도와 고상이 유의성 있게 나타났다. 즉, 초장 및초폭과 토양의 물리적 특성은 일정한 회귀식으로 작성할 수 있다. 상하부 생체량과 건중량은 토양의 물리적 특성과 직접적인 상관성이 없는 것으로 나타났다.

• Plant Resources
• /
• 제2권1호
• /
• pp.42-48
• /
• 1999

This study was undertaken to examine the feasibility of black locust (Robinia pseudoacacia) as substrates for several edible mushrooms. For the cultivation of several edible and/or medicinal fungi on black locust, optimum bulk densities, synthetic or semisynthetic additives, natural additives and pretreatment methods were investigated. Fruit body yields of the fungi on various sawdust media composed of different wood species were also analyzed for testing the capability of black locust as a substrate for mushroom production. Mycelial growths decreased proportional when the bulk density increased. The most suitable carbon and nitrogen sources as additives to promote the mycelial growth were sucrose (2%, w/w) and ammonium phosphate (0.2%, w/w) respectively. When corn-powder and beer-waste as natural additives were added to sawdust of black locust showed the significant growth of mycelia. And the optimum mixing ratio was 10:2:1 (sawdust: corn-powder: beer-waste, w/w). Black locust after cold water treatment showed the outstanding mycelial growths. Any significant changes of pH, moisture content (%) and dry-weight losses (%) could not be found among culture substrates (sawdust of black locust, oak and poplar wood) examined before and after harvesting of fruit bodies. Yield of fruit bodies on black locust culture media were comparable with those culture media composed with oak and poplar wood. The present work indicated strongly the potentiality of black locust as raw materials for edible and medicinal mushrooms.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.25-43
• /
• 2005

Generally, machine calendering are used change of paper surface properties. During machine calendering, dry paper passes between the rolls under pressure, thereby improving the surface smoothness and gloss. These improvements make the paper better suited for printing and decreasing problems during the printing, such as delayed dry and set-off. Then we investigated newspaper properties by the changing of machine calendering condition, and relationship printability. Properties of each samples were examined in accordance with KS and TAPPI standard test method i.e, basic weight, bulk density, thickness, porosity, opacity, brightness, smoothness and roughness. IGT printability tester was used to obtain ink requirement of newspaper, printed density and set-off. Results of in this study, we have proposed the optimizes range of newspaper calendering condition. Useful optimize calendering condition was pressure 55 kN/m, temperature $130^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권2호
• /
• pp.295-301
• /
• 1992

Eight crop residues : 1, sorghum (Sorqhum bicolor) straw, 2, maize (Zea mays) straw, 3, cotton (Gossypium Sp.) straw, 4, sunflower (Helianthus Sp.) straw, 5, cotton (Gossypium Sp.) seed hulls, 6, groundnut (Archais hypogaea) hulls, 7, maize (Zea mays) cobs, 8, sugarcane (Saccharum officinarum) bagasse and two forest grasses 9, Heteropogan contortus dry grass and 10, Sehima nervosum dry grass were subjected to three physical processing 1, chopping (2-3 cm) 2, grinding (8 mm sieve) and 3, pelleting (10 mm die holes). The processed material was fed ad lib. Along with 250 g of concentrate mixture per head per day to 6 adult local goats and 16 adult Nellore rams in ten digestion experiments and finally assessed the nutritive value of the processed roughages by difference method. Grinding increased bulk density by 32.4 (cotton seed hulls, CSH) to 88.1% (Sehima dry grass) while pelleting of ground material increased bulk density by 53.9 (maize cobs) to 235.8% (maize straw). The average particle size ranged from $584.1/^U$ (sorghum straw) to $1467/^U$ (CSH). Modulus of uniformity ranged from 2:5:3 (sorghum straw) to 7:2:1 (CSH) while modulus of fineness ranged from 3.4 (sorghum straw) to 5.4 (CSH). Molasses absorbability was highest with cotton seed hulls and least with maize cobs. Pelleting increased DM intake of the residues except cotton seed hulls compared to grinding. Grinding of chopped material/unprocessed material increased DM intake on sorghum straw and cotton seed hulls. Sheep consumed more DM compared to goats on all the residues except sorghum and sunflower straws. Pelleting increased nutritive value of all the residues compared to grinding and chopping. However, no difference was observed in the nutritive value due to grinding and chopping. Goats performed better compared to sheep in utilizing the fibrous residues.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.