• 제목/요약/키워드: dry bridge

검색결과 65건 처리시간 0.023초

수리동력학적 분리장치에 의한 교량에서의 비점원 오염물질 처리시 운전변수와 분리효율에 관한 연구 (Operational Variables and Performance of Hydrodynamic Separator Treating Rainfall Runoff from Bridge)

  • 김연석;우강화;김영철
    • 한국물환경학회지
    • /
    • 제27권3호
    • /
    • pp.342-348
    • /
    • 2011
  • A hydrodynamic separator using natural free energy provided by bridge was operated for the treatment of stormwater runoff. The separator was automatically controlled by using electronic valve which is connected with pressure meter. Normally the separator was opened during dry days, but it was closed after the capture of first flush. The results indicated that the average pressure and the flow rate were directly affected by the rainfall intensity. The pressure was more than 3 meters as the rainfall intensity was above 5 mm/hr. The percent volume of underflow decreased as the pressure and flow rate increased, but the percent volume of overflow showed an opposite behavior. The concentration of total suspended solids (TSS) in underflow increased as a function of increasing pressure while it decreased in overflow. The TSS separation efficiency was evaluated based on mass balance. It ranged from 30% to 90% with the pressure ranging from 2 to 10 meters, and it was proportional to pressure and flow rate. The analysis of water balance indicated that around 13% of total runoff was captured by the separator as a first flush, and this runoff was separated as underflow and overflow with the respective percent volume of 29% and 71%. The pollutants budget was also examined based on mass balance. The results showed that the percent of TSS, $COD_{cr}$, TN and TP in underflow were 73%, 59%, 7.6% and 49%, respectively.

경량골재를 사용한 자기충전 콘크리트의 건조수축률 예측 (The prediction for drying shrinkage of self-consolidating concrete using lightweight aggregate)

  • 김용직;최연왕;김영진
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.341-344
    • /
    • 2008
  • 경량콘크리트는 구조물의 자중을 줄일 수 있는 장점 때문에 부재단면의 축소 및 시공의 간편화를 이룰 수 있어 장경간 교량 및 초고층 건물 등에 적용하여 시공비용을 절감할 수 있는 효과가 있다. 그러나 경량콘크리트는 재료 자체의 특수성으로 인하여 일반콘크리트와는 다른 배합설계 방법이 필요하다. 경량콘크리트를 일반콘크리트의 배합설계 방법으로 제조할 경우 골재의 경량화에 따른 재료분리 및 강도저하 현상이 우려된다. 경량콘크리트 제조시 발생하는 재료분리 및 강도저하 현상 등을 해결하기 위한 방안 중 하나로 본 연구에서는 자기충전콘크리트의 배합설계 방법을 이용하였다. 경량골재를 사용한 자기충전콘크리트의 역학적 특성인 압축강도, 기건 밀도 및 비강도를 계산하여 검토하였으며, 건조수축률예측은 ACI committee 209에서 제시된 식을 이용하였다.

  • PDF

세립토의 침식능에 대한 토질정수의 영향 (Influence of Soil Properties on Erodibility of Fine-grained Soils)

  • 곽기석;이주형;박재현;정문경;배규진
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.89-96
    • /
    • 2004
  • 흐르는 물의 침식유발능력과 지반의 침식저항능력을 동시에 고려할 수 있는 새로운 교량세굴해석 모델을 개발하기 위한 많은 연구가 진행되었으며, 이러한 노력의 일환으로 지반의 침식율을 정량화할 수 있는 세굴률 시험기가 개발되었다. 본 연구에서는 세굴률 시험기를 이용하여 3종의 재성형 점토에 대해 세굴률 실험을 실시하였다. 재성형 점토의 세굴률 실험을 통해 성형하중의 변화에 따른 세립토의 침식특성을 분석하였으며, 또한 토성치와 침식율의 상관관계 분석을 시도하였다. 실험과 해석을 통해, 토질정수 중 특히 단위중량과 전단강도는 지반의 침식특성에 큰 영향을 미치는 것으로 나타났다.

금속 구조물의 수중 절단을 위한 기계적 열적 공정의 특징 분석 (A Short Review on the Mechanical and Thermal Processes for Underwater Cutting of Metal Structures)

  • 문도영;조영태
    • 한국기계가공학회지
    • /
    • 제19권1호
    • /
    • pp.121-133
    • /
    • 2020
  • Underwater cutting has a different mechanism than dry cutting, and there are more restrictions than benefits. Due to these constraints, research and development of underwater cutting has been very limited. At present, reactor dismantling is emerging as an important task worldwide, and reactor pressure containers, a key part of the reactor, are decommissioned based on underwater cutting. Reactor pressure containers are high-level radioactive waste, which is one of the main goals of today, such as to bridge the gap between environmental, safety, and cutting performance; hence, a process suitable for cutting should be applied. Therefore, many studies are being conducted on underwater cutting in connection with the dismantling of nuclear reactors in various areas in order to find appropriate processes. This paper first introduces the core technology of underwater cutting processes and discusses various processes. The emphasis is then placed on the adequacy of the reactor dismantling application. More specifically, we examine the suitability for the mechanical and thermal cutting processes, respectively, to find a solution suitable for dismantling a reactor. We discuss how each solution can sufficiently perform the specified functions at each stage of reactor dismantling and suggest that these processes can perform all of the work of underwater cutting.

물 환경 건전화를 위한 도시하천의 물 순환 모의 (I) - 안양천 유역 - (Hydrologic Cycle Simulation of Urban river for Rehabilitation of Water Environment (I) - Anyangcheon Basin -)

  • 이정민;이상호;이길성
    • 한국물환경학회지
    • /
    • 제22권2호
    • /
    • pp.349-357
    • /
    • 2006
  • Nowadays, the discharges of urban streams during dry season are depleted because the hydrologic cycle in the watershed has been destroyed due to the expansion of the impermeable area, the excessive groundwater pumping, climate change, and so forth. The streamflow depletion may bring out severe water quality problems. This research are to investigate the hydrologic characteristics and to develop a technology to restore sound hydrologic cycle of Anyangcheon watershed. For the hydrological cycle analysis of the Anyangcheon watershed, continuous simulations of urban runoff were performed for the upstream basin of Gocheok bridge whose basin area covered 4/5 of the whole catchment area. The increase of impervious area by urbanization was analysed and its effect on urban runoff was evaluated. The SWMM 5 (Storm Water Management Model 5) was used for the continuous simulation of urban runoff. The analysis results of urbanization effect on runoff are as follows: the surface runoff in 2000 increases to 65% of the whole precipitation whereas the surface runoff in 1975 amounts to 50% of the precipitation; the groundwater runoff in 2000 amounts to 7% and shows 6% decrease during the period from 1975 to 2000.

초속경라텍스개질콘크리트의 초기수축 (Early-Age Shrinkage of Very-Early Strength Latex Modified Concrete)

  • 이정호;최판길;최승식;윤경구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.269-272
    • /
    • 2004
  • After concrete casts, temperature decent and shrinkage bring volume changes of concrete pavement. Microcracking and cracking in concrete pavement are caused by these volume changes. As a result, durability of concrete pavement is deteriorated. Recently, Very-Early Strength Latex Modified concrete(below:VESLMC) from the beginning of High-Way is used as urgent repair material for bridge deck. The advantage of VESLMC is that compressive and flexural strength at 3 hours age are 4.5MPa and 21MPa respectively. It allows the traffic to open in 3 hours. But, this material has the problem which is early-age shrinkage cracking caused by water self-dissipation with rapid hydration reaction and water evaporation with body dry. Unfortunately, until now, the research about early-age shrinkage of VESLMC leaves something to be desired. Therefore, the purpose of this study is to present the early-age shrinkage of VESLMC respect to latex contents and shrinkage ratio to maximum length change that can help field engineers' skill. Latex contents of 0, 5, 10, 15, $20\%$ in standard of same workability in VESLMC are selected by experimental variables. After initial set, shrinkage value was measured with 10mm LVDT for 3 days. The results of maximum shrinkage ratio were 0.019, 0.017, 0.023, $0.027\%$ respectively.

  • PDF

수중 항만구조물의 유지보수를 위한 건식 케이슨 공법 개발 (Development of Dry Process Caisson Method for Maintenance of Submerged Harbor Structure)

  • 이중우;오동훈;곽승규;김성태
    • 한국항해항만학회지
    • /
    • 제30권6호
    • /
    • pp.447-455
    • /
    • 2006
  • 근래 국내 산업의 고도화와 수출입 증가에 따른 경제력의 상승과 함께 도로, 교량 및 항만시설의 확충과 각종 호안 및 해상구조물의 건설요구가 급증하고 있다. 해양수산부는 9대 신항만의 건설과 기존어항의 재개발을 추진하고 있다 이들 구조물의 대부분은 교각기초, 안벽, 돌핀, 안벽, 돌제 등은 강재나 콘크리트 파일로 새롭게 건설되고 있다. 이들 기초, 지지격벽 및 파일은 건설 후에 수면아래에 있게 되므로 구조물의 상태를 파악하기가 어렵고, 그 구조물의 보수나 보강이 충분하지 못한 상태이다. 더구나 매년 이러한 유지 보수작업은 구조물의 부식을 방지하기 위한 불완전한 보수와 수중공사로 인한 장기작업으로 고비용 때문에 정부의 예산을 소진하게 된다. 이와 같은 정부예산의 지출을 절감하기 위해서는 기존 구조물의 내구연한을 연장시킬 필요가 있는 것이다. 그러므로, 부유식 케이슨으로 건식작업환경을 제공함으로써 평균해수면 수중구조물의 유지를 위한 새로운 기법을 개발하였다. DCPM은 작업구간을 쉽게 이동하고 취급이 용이한 것으로 나타났다. 또한 DCPM은 유지보수비용 및 방식작업 시간을 현저하게 줄였다. DCPM은 해안 및 수중구조물의 유지와 건설비용을 줄이는 이정표가 될 것으로 본다.

수중 항만구조물의 유지보수를 위한 건식 케이슨 공법 개발 (Development of Dry Process Caisson Method for Maintenance of Submerged Harbor Structure)

  • 이중우;오동훈;곽승규;김성태
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
    • /
    • pp.163-170
    • /
    • 2006
  • 근래 국내 산업의 고도화와 수출입 증가에 따른 경제력의 상승과 함께 도로, 교량 및 항만시설의 확충과 각종 호안 및 해상구조물의 건설요구가 급증하고 있다. 해양수산부는 9대신항만의 건설과 기존어항의 재개발을 추진하고 있다. 이들 구조물의 대부분은 교각기초, 안벽, 돌핀, 안벽, 돌제 등은 강재나 콘크리트 파일로 새롭게 건설되고 있다. 이들 기초, 지지격벽 및 파일은 건설 후에 수면아래에 있게 되므로 구조물의 상태를 파악하기가 어렵고, 그 구조물의 보수나 보강이 충분하지 못한 상태이다. 더구나 매년 이러한 유지 보수작업은 구조물의 부식을 방지하기 위한 불완전한 보수와 수중공사로 인한 장기작업으로 고비용 때문에 정부의 예산을 소진하게 된다. 이와 같은 정부예산의 지출을 절감하기 위해서는 기존 구조물의 내구연한을 연장시킬 필요가 있는 것이다. 그러므로, 부유식 케이슨으로 건식작업환경을 제공함으로써 수선부근에서의 수중구조물의 유지를 위한 새로운 기법을 개발하였다. 개발한 방법은 작업구간을 쉽게 이동하고 취급이 용이한 것으로 나타났다. 또한 기 기법은 유지보수비용 및 방식작업 시간을 현저하게 줄이는 것은 물론 보다 나은 방식을 제공하는 것으로 나타났다. 이 기술은 해안 및 수중구조물의 유지와 건설비용을 줄이는 이정표가 될 것으로 본다.

  • PDF

무등산 계곡수 유입을 통한 광주천 수질 개선 방안에 관한 연구 (A Study on the Improvement Plan of Gwangju-cheon Water Quality by the Inflow of Mt. Mudeung Valley Water)

  • 고준일;정선용
    • 한국습지학회지
    • /
    • 제23권3호
    • /
    • pp.252-259
    • /
    • 2021
  • 무등산에서 발원하여 광주천으로 유입되던 수많은 계곡수가 합류식 하수관거로 유입되면서 광주천의 건천화와 수질 악화가 심화되었다. 본 연구는 하수처리장으로 유입되는 광주천 유역의 무등산 계곡수를 수원으로 활용하여 실개천을 조성하는 방안에 대해 연구하였다. 먼저, 100 m3/일 이상의 유량을 보이는 4개 지점의 유량 및 수질 조사 결과 지점별로 105~2,721 m3/일의 유량을 나타냈으며, 평균 수질은 BOD5 0.3~1.6 mg/L로 나타났다. 만약, 갈수기 유량 1,500 m3/일의 실개천을 조성한 후 광주천 남광교 지점으로 유입시킨다면, BOD 7.3%, COD 6.5%, T-P 5.8%, T-N 5.2%의 개선 효과가 있을 것으로 예측되었다. 또한, 계곡수 유입에 의한 하수처리장 유량 부하 부담이 줄어들고, 하수처리 비용이 절감되며, 도심 속 수변 amenity 창출에 의한 Blue-Green-Network (BGN) 구축의 토대가 될 것으로 판단되었다.

복합긴장방식이 적용된 세그멘탈 U형 거더 정적 거동 연구 (A Study of Statistic Behavior of Segmental U-shaped Prestressed Concrete Girder Applied with Integrated Tensioning Systems)

  • 장현옥;장일영
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.329-338
    • /
    • 2024
  • 연구목적: 본 연구는 긴장방식을 복합적으로 적용한 세그멘탈 PSC U형 거더에 대한 해석적 거동을 기반으로 실대형 실험체의 휨 거동 결과를 평가하여 거동의 안전성을 검증하고자 한다. 연구방법: 도로교설계기준 한계상태설계법의 사용한계 및 극한한계상태 설계 결과를 바탕으로 40m 실대형 실험체의 가력하중을 산정하고 이에 대한 4점재하방식 정적 하중재하 실험을 수행하였다. 연구결과: 설계하중, 균열하중 및 극한하중이 작용할 때 해석적 처짐값 대비 97.1%, 98.5% 그리고 79.0%에 해당하는 실험체 처짐이 발생하였다. 설계하중, 균열하중 및 극한하중이 작용할 때 균열계는 각 연결부에서 0.009~0.035mm, 0.014~0.050mm, 6.383~5.522mm로 계측되었다. 결론: 균열하중 재하시까지 실험체는 탄성적으로 거동하였고 균열발생 후 극한하중까지 변형율-경화현상을 보이며 작용하중에 대하여 휨 저항 거동이 뚜렷이 나타났음을 확인하였다. 실대형 실험체 연결부(Dry Joint) 균열은 시설물 상태평가 B등급 기준 25% 미만의 결과로써 연결부의 탄성적 거동을 확인하였고 극한하중 제거 후 최종적 잔류 변형은 0.114mm로써 세그먼트 연결부의 안정적 거동을 확인하였다.