• Journal of Pharmaceutical Investigation
• /
• v.23 no.4
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.548-552
• /
• 2004

Intracanal disinfection of infected root canal is one of important treatment procedure. This in vitro study aimed to evaluate whether the surface polymers of controlled release drug (CRD) can effectively control the release rate of chlorhexidine for root canal disinfection. Four CRD prototypes were prepared: Group A (n=12); The core device (absorbent paper point) was loaded with 40% CHX solution as control. Group B (n=12); same as group A, but the device was coated with chitosan. Group C (n=12); same as group A and then coated three times with 5% PMMA. Group D (n=12); same as group A and then coated three times with 3% PLGA. All CRD prototypes were soaked in 3 mL distilled water for experimental periods and the concentrations of released CHX from each CRD prototype were determined using a UV spectrophotometer. Results showed that release rate of CHX were the greatest in the non-coated group (control group), followed by the chitosan-coated group, the PLGA-coated group, and the PMMA-coated group (P < 0.05). This data indicate that surface polymers can control the release rate of CHX from the CRD prototypes.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.246-252
• /
• 2002

In order to the development of the delivery device of long-acting local anesthetics for postoperative analgesia and control of chronic pain of cancer patient, fentnyl-loaded poly (L-lactide-co-glycolido) (PLGA, molecular weight, 5,000 g/mole; 50 : 50 mole ratio by lactide to glycolide) microspheres (FMS) were studied. FMS were prepared by an emulsion solvent-evaporation method. The influence of several preparation parameters such as initial drug loading, PLGA concentration, emulsifier concentration, oil phase volume, and fabrication temperature has been investigated on the fentanyl release profiles. Generally, the drug showed the biphasic release patterns, with an initial diffusion followed by a lag period before the onset of the degradation phase, but there was no lag time in our system. Fentanyl was slowly released from FMS over 10 days in vitro with a quasi-zero order property. The release rate increased with increasing drug loading as well as decreasing polymer concentration with relatively small initial burst effect. From the results, FMS may be a good formulation to deliver the anesthetic for the treatment of chronic pain.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.2 s.56
• /
• pp.33-38
• /
• 2005

Chitosan is a dietary fiber because of a linear polysaccharide composed of $\beta-(1{\rightarrow}4)$-linked 2-amino-2-deoxy-D-glucopyranose. In this study, control release system of vitamin C has been estimated in chitosan molecular network as a vitamin C carrier of controlled release. The amount of released vitamin C were decreased in higher amount of chitosan concentration. Especially, vitamin C were slowly released from chitosan solution in dialysis membrane when compared with vitamin C solution alone in dialysis membrane. These result assumed that chitosan driving force is dependent on chitosan molecular weight and cationic property of amino group with anionic property of vitamin C.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.161-165
• /
• 1990

An automated, simple, and reliable method was developed for determining in vitro drug release rate from transdermal delivery dosage forms. The patch is held in position in the heating block by sandwiching it between the middle plate and the bottom plate of diffusion cell. The dissolution profile of the commercially available transdermal scopolamine patch was determined over a 72-h period, and the results were compared with those obtained with other methods; paddle-over-disk method, reciprocating method, and diffusion cell method. It was demonstrated that the flow-through method is equivalent in terms of release rate profile and accumulated released drug amount over the lifetime of the dosage form tested. Also this method is simple, reliable and reproducible. Therefore, this technique can be used in a quality control for assuring product uniformity.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.691-700
• /
• 2002

Interstitial therapy using biodegradable polymeric device loaded with anticancer agent can deliver the drug to the tumor site at high concentration, resulting in an increase of therapeutic efficacy. 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) is most commonly used as chemotherapeutic agent for brain tumors. The design of implantable device is regarded as an important factor lot the efficient delivery of antitumor agent to targeting site. In order to control the release profile of drug, the release pattern of BCNU with the changes of various dimension and additives was investigated. The PLGA wafers containing 3.85, 10, 20 and 30% of BCNU were prepared in various shape (diameter of 3, 5 and 10 mm, thickness of 0.5, 1 and 2 mm) by direct compression method. In vitro drug release profile of BCNU-loaded PLGA wafers could be controlled by changing the dimension of wafers such as initial drug content, weight, diameter, thickness, volume and surface area of wafers, as well as PLGA molecular weight and additives. Drug release from BCNU-loaded PLGA wafers was facilitated with an increase of BCNU-loading amount or presence of poly(N-vinylpyrrolidone)(PVP) or sodium chloride (NaCl). The effects of various geometric factors and additives on the BCNU release pattern were confirmed by the investigation of mass loss and morphology of BCNU-loaded PLGA wafers.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.33-41
• /
• 2017

In this study, we prepared PLA-tetracycline complexes coated gold nanoparticle-titania nanotubes and estimated their infrared LASER mediated drug release in the abdominal region of ICR mouse. The results of UV-Vis spectrophotometer showed the highest absorbance at the wavelength of 530 nm and 809 nm indicating the existence of gold nanoparticles. EDX analysis showed that the amounts of gold nanoparticle coated on titania nanotubes were approximately 3.62-36.5 wt%. In vivo test resulted that the tetracycline release value of experimental groups (6.5 ng/mL) was higher than that of control group (5.8 ng/mL) on the condition of 30 minutes of LASER irradiation. Therefore, it is expected that PLA-tetracycline complexes coated gold nanoparticle-titania nanotubes have the feasibility in the field of infrared remote controlled drug device and overcome the limitation of location and time of drug release in dental implant.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.219-223
• /
• 2009

The nanofibers fabricated by using an electrohydrodynamic process has been used as various applications, such as nano-device, filtering system, protective clothes, wound dressing, and drug delivery system (DDS). Of these applications, the DDS should be needed to minimize side effects of drugs, maximize the properties of medicine, and efficiently deliver the required amount of drugs to the diseased area. In this paper, by using the electro spinning process, which is one of electrohydrodynamic processes, two different types, polycarprolactone and poly(ethylene oxide)/Rhodamine B, of electrospun mats were fabricated layer by layer and the release behavior of Rhodamine B was characterized with time. In addition, to show the feasibility of DDS of this type, we tested release behavior of a peptide of the nanofiber system, a PCL/(Peptide+PEO)/PCL nanofiber mat. The released peptide did not loss biological activities. From these results, we believe that the layered nanofiber mat as a DDS has enough function of a new drug delivery system.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.3
• /
• pp.35-47
• /
• 1992

Hydrogel coated ring shaped ocular inserts (containing the antibiotic, tylosin tartrate) were used in an evaluation of the effectiveness of polymeric ocular drug release devices for treating infectious bovine keratoconjunctivitis. The in vivo experiments represent the first experiments using hydrogel ocular inserts containing an antibiotic for treating infectious bovine keratoconjunctivitis. In the infection tests, ten calves. were challenged with $2.4{\times}10^8{\sim}1.6{\times}10^9$ Moraxella bovis (a bacterium) colonies per eye following two ten minute ultraviolet radiation eye preconditioning exposures. Ninety five percent of the eyes (19 of 20 eyes) were successfully infected by this method. All infected eyes were monitored for the presence of the bacteria quantitiatively, and clinical observations were made for 14 days. The test was performed by three consecutive steps: 1) inoculation with 2 ultraviolet (UV) radiations, 2) growth of bacterial colonies and 3) treatment with medicated ring-shaped devices. The first. bacteriological measurements after 2 UV exposures were performed at day 3 of the tests. At day 7 after inoculation of both eyes of a calf with M. bovis, a medicated or a non-medicated ring-shaped device was inserted into each eye of a calf. The eye receiving the non-medicated ring was taken as a control for comparison with the eye that received a medicated ring. During the next 7 day period following a medicated ring insertion, the number of bacteria in the treated eyes dropped dramatically to negligible levels (0 to 30 colony forming units/swab), while the control eyes which received a non-medicated ring still exhibited a relatively high number of bacteria ($10^3\;to\;10^6$ colony forming units/swab). The number of bacteria was significantly reduced by the antibiotic released from the medicated ocular insert.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1566-1573
• /
• 2006

The study was conducted on 30 true acyclic Sahiwal cows (15 cows, ${\geq}90$ days postpartum; 15 postpubertal heifers, ${\geq}30$ months of age) and a similar 20 untreated controls (10 cows, 10 heifers). An 'Eazi' breed Controlled Internal Drug Release (CIDR) device (containing 1.38 g progesterone) was inserted intravaginally for 7 days (days 0 to 7) followed by 500 IU eCG i.m. at CIDR removal in all the treated animals. Heifers also received 5 mg oestradiol valerate i.m at CIDR insertion. The reproductive performance of these animals was recorded in terms of oestrus induction response, conception and pregnancy rates. Plasma progesterone ($P_4$) and oestradiol-$17{\beta}$ ($E_2$) profiles of 4 representative animals from each treatment group before, during and after CIDR treatment were also monitored. An oestrus induction response of 100% was observed in treated cows and heifers. The majority of cows (53.3%) and heifers (60%) were induced to oestrus within 24-36 and 36-48 h, respectively after CIDR withdrawal; with mean intervals of $44{\pm}3.18$ and $48{\pm}2.35h$, respectively. The conception rate at induced oestrus was higher in cows (40%) than heifers (20%). The final pregnancy rates after 2 subsequent oestruses were 80 and 60% in cows and heifers, respectively (overall 70% for all treated animals). In comparison, only 10% of control animals (2 cows only, 2/20) showed oestrus and become pregnant (10%) during theentire study period. The pretreatment (day 0) mean plasma P4 levels were statistically (p>0.05) similar in cows and heifers ($0.40{\pm}0.04$ and $0.49{\pm}0.11ng/ml$, respectively). The peak $P_4$ levels were observed on day 1 in cows ($13.94{\pm}1.41ng/ml$) and day 2 in heifers ($19.15{\pm}3.30ng/ml$) with a progressive decline up to the day of CIDR withdrawal ($3.35{\pm}0.92$ and $8.79{\pm}1.71ng/ml$, respectively). Mean $P_4$ levels on day 9 and 10 in cows and heifers did not differ significantly from their respective day 0 values and the lowest values were recorded on day 10 both in cows and heifers ($0.13{\pm}0.03$ and $0.14{\pm}0.02ng/ml$, respectively). Wide variations in individual pretreatment $E_2$ levels were observed both in the cows (range = 4-26, mean = $13.00{\pm}4.65pg/ml$) and heifers (range = 10-14, mean = $11.50{\pm}0.96pg/ml$). Thereafter also, $E_2$ levels in cows showed variation and reached a peak level ($53.50{\pm}2.99pg/ml$) on day 8. In heifers, peak mean $E_2$ level ($111.25{\pm}39.81pg/ml$) was recorded on day 1, followed by a non-significant decline on day 2, a significant fall on day 6 and a non-significant increase on day 9 and 10. However, mean $E_2$ levels on days 7 (p<0.05), 8 and 9 (p<0.01) were significantly higher in cows compared to heifers. The post-CIDR withdrawal mean highest $P_4$ and lowest $E_2$ levels coincided with the period when the majority of animals were induced to oestrus. CIDR and eCG treatment resulted in effective induction of oestrus with satisfactory pregnancy rates in true acyclic Sahiwal cows and heifers.