• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.137-147
• /
• 2022

In this study, for students who gave up their studies midway through college, we investigate the reasons for dropping out of college, analyze the factors that caused students to drop out, and suggest improvement measures to effectively increase the recruitment rate of enrolled students. This study explores measures to increase student enrollment in community colleges. For this purpose, it conducted a survey of students who dropped out of G College between 2018 and 2020 from June 28 to July 9, 2021. Its analysis is based on the results of 53 students who participated in the survey. First, our results suggest that programs to develop interpersonal relationships between students, faculty, and staff are necessary. Such programs will cultivate a culture of solidarity and collective identity among students, which in turn will reinforce positive experiences in college. Moreover, by developing systems to form relationships between faculty and students, colleges can have a feedback mechanism, such as an open-study program, through which they learn what the students want and need. Through this effort, colleges can help their students adjust to campuses and enhance student satisfaction in college. Second, it is necessary to develop various extracurricular programs not only for freshmen but existing students and to run hobby and leisure activity programs. To have continuous, standing extracurricular programs instead of one-time events, colleges should set up specific goals, delivery methods and strategies. Third, colleges should renovate old and outdated buildings and facilities on campus to enhance the quality of campus life. Moreover, more comprehensive improvement of facilities and a campus environment by having various convenient and leisure facilities that meet the needs and demands of students. Fourth, it is suggested to develop programs or systems that help students to more fully engage in campus lives and activities, which in turn increases confidence and self-efficacy among students. Through such programs, students can better adjust to their majors and, therefore, will be less likely to drop out of college.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1095-1104
• /
• 2022

The towing cable plays a role in dropping and salvaging the Towed Array Sonar System (TASS) into the water and transmitting the signal (information) detected by the sonar in the water to the probe or surface ship. The towing cable consists of a heavy cable and a lightweight cable in detail. The towing cable for sonar is characterized by high reliability and durability as the underwater environment deteriorates as the operating depth increases. Due to these restrictions, cases designed and manufactured in Korea are extremely rare. The core technology for towing cable design secured through this study is expected to be used in various ways in the defense industry and the private sector.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.6
• /
• pp.242-246
• /
• 2022

The purpose of this study is to report on the clinical improvement of a patient treated with Korean medicine for Post COVID-19 syndrome. A 52-year-old male patient with headache and chronic fatigue was diagnosed with post-acute COVID-19 syndrome. He had clinical symptoms such as headache, sweating, fatigue, and insomnia and was treated with acupuncture and herbal medicines such as Sasammaekmoondong-tang. To assess the treatment outcomes, the authors used the Fatigue Severity Scale (FSS) and the Numeral Rating Scale (NRS). Following treatment, fatigue improved, with the FSS score dropping from 48 at the first visit to 18 at the final visit, and clinical symptoms such as headache and insomnia disappeared. According to the findings of this study, Korean Medicine could be used in the clinic to treat post-COVID-19 complications.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.241-247
• /
• 2023

This study sought to investigate the effect of academic satisfaction on the dropout intention of cosmetology undergraduates. Analyzing the effect of academic satisfaction on career dropouts showed that the sub-factors of academic satisfaction-evaluation satisfaction, class satisfaction had a statistically significant part effect. Analyzing the effect of academic satisfaction on psychological factors for dropping out showed that the sub-factors of academic satisfaction have a statistically significant effect. Furthermore, regarding the effect of academic satisfaction on environmental factors, the sub-factors of academic satisfaction have a statistically significant effect on wealth. High satisfaction was shown to have no statistically significant effect on dropout intention. The results of the study showed that the higher the degree of satisfaction with the evaluation and the degree of satisfaction with the course of beauty majors, the more negative (-) the impact on dropout. For cosmetology majors, academic satisfaction is a subjective emotion felt through study at university and major. Students with high academic satisfaction are more likely to love their school and their work, and positively influence their intention to stay in school and reduce student dropout rates. Intention to drop out indicates the intention to lose interest and purpose in cosmetology college students. This is directly linked to the dropout rate of school students and requires steady research. Through this research, we hope that active discussions will be held on academic satisfaction and intention to drop out of university students specializing in cosmetology.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.400-408
• /
• 2009

Simulation applications for analyzing the productivity of construction operations at operation level and project schedules at project level are crucial methods in project management. The application at two different levels should be very tightly linked to each other in practice. However, appropriate integration at the levels is not achieved in that existing systems do not support to integrate operation models into a schedule model. This paper presents a new approach named to Discrete Event Simulation-Nesting modeling approach, which supports not only productivity analysis at operation level but also schedule management at a project level. The system developed by the authors allows creating operation models at the operation level, maintaining them in operation model library, executing sensitivity analysis to find the behaviors of the operation models when different combination of resources are used as existing DES systems do. On top of the conventional functions, the new system facilitates to find the optimum solution of resource combinations which satisfy the user's interest by computing the hourly productivity and the hourly cost of the operation. By drag-and-dropping an operation model kept in the operation model library, the operation models are integrated into an activity of the schedule model. When a complete schedule model is established by nesting operation models into the schedule model, stochastic simulation based scheduling is executed. A case study is presented to demonstrate the new simulation system and verify the validity of the system.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.45-56
• /
• 2015

The distribution of seaweed was examined in Jeonnam archipelago marine ranching area, the coastal of geumo-do, Yosu. Abundance and distribution of seaweed in dropping site of artificial reef were sampled at 6 station at October 2007. Seaweed community were investigated with quadrat method at line-transect by scientific SCUBA divers. as a result, 30 species in total, 4 green, 9 brown and 15 red seaweed were identified. Range of seaweed biomass in all sampling stations were about 1,600~4,000 g/m². At intertidal zone, appearance of individuals and dominance rate were showed higher than below the subtidal line and at depth from 4m to 6m, individuals, dominance rate and biomass were represented low level. characteristic of water in marine ranching area is turbidity and also compensation depth is low. For that reason, individuals of seaweed community were smaller from depth of 4 meters. Therefore, when equip the artificial reef for preparation of seaweed beds need consider that equipment periods(early spring; before releasing marine seaweed spore) and suitable water depth(3~6m).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.153-167
• /
• 2008

High temperature and natural sun light are considered as the core conditions for high quality and large quantity of Phellinus baumii production. However still now on there has been a mistake of excessively cutting off the natural light by spreading the closing nets on the mushroom cultivating house. For an example there are many houses where the closing nets under the roofs be extended to cover the sides of the houses, which way prevents the mushrooms in the houses from receiving sufficient natural sun light and getting the temperature sufficiently to grow so that the quantity and quality of the produced mushrooms are lowered even though the mushrooms can grow in those conditions. In order to avoid this mistake, the closing nets must be placed on the roofs of the houses only without dropping them to cover the sides. Further more when the closing nets are placed triply at the beginning stage of Phellinus baumii's growth in the house, the nets restrain the internal temperature of the house going up and intercept the natural bright light flowing into the house so that the growing tardiness occur to the Phellinus baumii. Therefore the roof only must have been covered by the closing net for 65% cutting off the light until May, and then covered by double folded the net for June, triple folded the net for July and August, double folded the net for September, and the single net for October. When the ventilation in the house has been maintained until the house tightly balloon out through controling lifting force of internal air, the Phellinus baumii can grow well while the bed logs themselves aren't dried out. Marketing is also very much important as well as increasing quality and quantity of Phellinus baumii production.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.153-163
• /
• 2023

This study is situated in the context of intelligent transport systems, where in-vehicle devices assist drivers to avoid accidents and therefore improve road safety. The vehicles present in a given area form an ad' hoc network of vehicles called vehicular ad' hoc network. In this type of network, the nodes are mobile vehicles and the messages exchanged are messages to warn about obstacles that may hinder the correct driving. Node mobilities make it impossible for inter-node communication to be end-to-end. Recognizing this characteristic has led to delay-tolerant vehicular networks. Embedded devices have small buffers (memory) to hold messages that a node needs to transmit when no other node is within its visibility range for transmission. The performance of a vehicular delay-tolerant network is closely tied to the successful management of the nodes' transit buffer. In this paper, we propose a message transit buffer management model for nodes in vehicular delay tolerant networks. This model consists in setting up, on the one hand, a policy of dropping messages from the buffer when the buffer is full and must receive a new message. This drop policy is based on the concept of intermediate node to destination, queues and priority class of service. It is also based on the properties of the message (size, weight, number of hops, number of replications, remaining time-to-live, etc.). On the other hand, the model defines the policy for selecting the message to be transmitted. The proposed model was evaluated with the ONE opportunistic network simulator based on a 4000m x 4000m area of downtown Bouaké in Côte d'Ivoire. The map data were imported using the Open Street Map tool. The results obtained show that our model improves the delivery ratio of security alert messages, reduces their delivery delay and network overload compared to the existing model. This improvement in communication within a network of vehicles can contribute to the improvement of road safety.

• Composites Research
• /
• v.21 no.3
• /
• pp.9-17
• /
• 2008

In this paper, the low velocity impact characteristics of filament winding CFRP pressure vessel was investigated using numerical and experimental methods. The cylinder part of CFRP vessel was impacted using triangular shape impactor which simulated the sharp edge of dropping tools and impact response behavior of CFRP was reviewed. The mechanical behavior, such as deformation and stress distribution, were also predicted by explicit finite element method and the validity of the model was investigated. For the quantitative evaluation of the residual strength of the pressure vessel after impact, a series of the ring specimens was cut from the impacted vessel and its burst pressure was measured by hydraulic pressure hoop tension test. As the results, the relationship between the residual strength degradation and the impact energy was successively obtained and a useful methodology to evaluate quantitatively the impact damage tolerance of CFRP pressure vessel was established.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.33-39
• /
• 2022

As 3D printer-related patents expire and major technologies are disclosed, the price of 3D printers is dropping, creating an environment where you can easily find the product you want. In particular, the cheapest FDM (Fused Deposition Modeling) 3D printer is being used in various fields. The FDM method can be manufactured without collapsing of the shape only by attaching a support under certain conditions when outputting the shape. When printing a shape without a support, the irregular surface that occurs at a certain angle is a defect in the product, but it is considered that it can be used as another fun factor in terms of arts and crafts. In this paper, to obtain such an irregular surface, factors that can affect the output were controlled and only the output angle was tested as a displacement factor. As a result of the experiment, it was possible to obtain an irregular surface without the filament flowing down when printing at an angle of 62° to 70° from the vertical. Also, artificially irregular surfaces were applied to craft products.