• 제목/요약/키워드: driving under the influence

검색결과 82건 처리시간 0.029초

차량용 에어컨 압축기가 실차 연비에 미치는 영향에 관한 실험적 연구 (Experimental Study on Effects of Compressor for Automotive Air Conditioning System on Fuel Economy)

  • 유성연;김영신
    • 대한기계학회논문집B
    • /
    • 제37권1호
    • /
    • pp.59-65
    • /
    • 2013
  • 본 논문은 차량용 에어컨 압축기가 실차 연비에 미치는 영향에 대하여 실험적으로 연구한 것으로, 본 연구의 목적은 연비에 주요한 영향 인자인 압축기의 토출 용량별 구동 토크에 의한 실차 연비 기여도를 분석하는 것이다. 연비에 직접적인 영향을 주는 압축기의 부하를 측정하기 위하여 압축기 클러치에 직접 부착하는 토크 센서를 개발하였으며, 실차 평가전 벤치 토크 미터와의 비교 평가를 통하여 토크 센서의 신뢰성을 검증하였다. 토크 센서가 부착된 압축기를 장착한 차량을 환경 풍동에서 연비 측정을 할 수 있도록 장치를 구성한 상태에서 연비 평가를 수행하였다. 압축기의 토출 용량에 따른 구동 토크는 연비에 직접적인 영향을 주며, 동일 사양 압축기에서 토출 용량이 약 11% 커질 때 연비는 약 2~3% 악화됨을 알 수 있었다.

실차 주행중 입력하중 계측 기법 개발 (Development of an Input Force Measuring Method for Vehicle Tests)

  • 이광천;김승한;이강인;배병국
    • 대한기계학회논문집A
    • /
    • 제41권2호
    • /
    • pp.143-147
    • /
    • 2017
  • 본 연구에서는 실차 성능 개선을 위하여 WFT를 이용하지 않고 주행중 입력 하중을 계측할 수 있는 기법을 개발하였다. 이를 위하여 3축 하중이 계측이 될 수 있는 로드셀을 개발하였으며, 성능 검증을 수행하였다. 성능검증 이후에는 개발된 로드셀을 이용하여 입력 하중을 계측할 수 있는 시스템을 제안하였으며, 제안된 시스템을 제작하여 검증 평가를 수행하였다. 검증 평가 결과 순간적인 입력이 크게 들어오는 Impact 노면 조건을 제외한 대부분의 일상적인 노면 조건에서 제안된 시스템을 이용하여 실차 입력 하중 계측이 가능함을 확인하였으며, 핸들링 검증 평가를 통하여 타이어의 영향도에 대한 평가 시험까지 진행하였다. 본 연구에서 제안한 입력하중 계측 기법을 이용하면 WFT를 이용하지 않고 성능 확인이 가능할 것으로 판단된다.

이동식 배출가스 측정장비를 이용한 소형 경유 자동차의 실도로 질소산화물 배출특성 분석 (Evaluation of On-Road NOx Emission from a Light Duty Diesel Vehicle using a Portable Emissions Measurement System)

  • 이태우;이종태;김정수
    • 한국대기환경학회지
    • /
    • 제28권1호
    • /
    • pp.94-104
    • /
    • 2012
  • The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

Investigation of Chemical Sensor Array Optimization Methods for DADSS

  • Choi, Jang-Sik;Jeon, Jin-Young;Byun, Hyung-Gi
    • 센서학회지
    • /
    • 제25권1호
    • /
    • pp.13-19
    • /
    • 2016
  • Nowadays, most major automobile manufacturers are very interested, and actively involved, in developing driver alcohol detection system for safety (DADSS) that serves to prevent driving under the influence. DADSS measures the blood alcohol concentration (BAC) from the driver's breath and limits the ignition of the engine of the vehicle if the BAC exceeds the reference value. In this study, to optimize the sensor array of the DADSS, we selected sensors by using three different methods, configured the sensor arrays, and then compared their performance. The Wilks' lambda, stepwise elimination and filter method (using a principal component) were used as the sensor selection methods [2,3]. We compared the performance of the arrays, by using the selectivity and sensitivity as criteria, and Sammon mapping for the analysis of the cluster type of each gas. The sensor array configured by using the stepwise elimination method exhibited the highest sensitivity and selectivity and yielded the best visual result after Sammon mapping.

Public's Travel Intention Following COVID-19 Pandemic Constrained: A Case Study in Vietnam

  • NGUYEN, Ngoc Mai;PHAM, Minh Quyen;PHAM, Minh
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권8호
    • /
    • pp.181-189
    • /
    • 2021
  • The COVID-19 pandemic has impacted the tourism industry due to the resulting travel restrictions as well as a slump in demand among travelers. The tourism industry has been massively affected by the spread of coronavirus, as many countries have introduced travel restrictions in an attempt to contain its spread. In Vietnam, the government has largely been credited for the country's success in keeping COVID-19 transmission rates under control. Early awareness of the pandemic, appropriate, drastic, and people-centric measures, as well as public support, are the main factors behind the success of Vietnam. In that context, it is observed that people's travel demand has bounced back and this research will examine factors driving the public's travel intention in the post-crisis (pandemic) period. The survey was conducted on the Internet using questionnaires designed in the Google platform. Data was collected from April 16 to May 31, 2020, from 154 Vietnamese participants. Research findings demonstrate 4 direct and indirect determinants of travel intention. The strongest effects come from perceived behavioral control which is influenced by subjective well-being. Perceived risk negatively correlates with Self-efficacy and subjective well-being. Conducted in the context of post-COVID-19, the research implies that once the pandemic has been controlled, perceived risks, although still exist, insignificantly influence the public's travel intention.

1단 전기 집진기에서 2차 유동이 집진 효율에 미치는 영향 (Effect of Secondary Flows on the Particle Collection Efficiency in Single Stage Electrostatic Precipitator)

  • 이재복;배귀남;황정호
    • 대한기계학회논문집B
    • /
    • 제24권2호
    • /
    • pp.251-259
    • /
    • 2000
  • The ionic wind formed in a nonuniform electric field has been recognized to have a significant effect on particle collection in an electrostatic precipitator(ESP). Under normal operating conditions the effect of ionic wind is not pronounced. However, as the flow velocity becomes smaller, the ionic wind becomes pronounced and induces secondary flow, which has a significant influence on the flow field and the particle collecting efficiency. In this paper, experiments for investigating the effect of secondary flow on collection efficiencies were carried out by changing the flow velocities in 0.2-0.7m/s and the applied voltages in 9-11kV/cm. The particle size distributions and concentrations are measured by DMA and CNC. To analyze the experimental results, numerical analysis of electric filed in ESP was carried out. It shows that particle collection is influenced by two independent dimensionless numbers, $Re_{ehd}\;and\;Re_{flow}$ not by $N_{ehd}$ alone. When $Re_{flow}$, decreases for constant $Re_{ehd}$, the secondary flow prohibits the particle collection. But when $Re_{ehd}$ increases for constant $Re_{flow}$, it enhances the particle collection by driving the particles into the collection region.

현대 헤어스타일과 의상에 나타난 Junk Art적 디자인의 특성 (The Characteristics of Junk Art Design in Modern Hairstyle and Clothing)

  • 이수인
    • 한국생활과학회지
    • /
    • 제8권3호
    • /
    • pp.525-534
    • /
    • 1999
  • The purpose of this study is to analize in the focus on junk art the relation between hairstyle and dress, and fine art which is one of the driving force of fashion change. The method of this study is to take into theoretically consideration junk art in the trend of art and to take into documental concideration the trend of junk art reflected on hairsyyle and dress. The results are as following. First, there's a trait of poverty. This means using something deserted in our life and expands a new expression world which introduces a new, poor beauty, refusing a existent, rich and arranged one. Second, there's a trait of machinery. In Junk Art, according to the appearance of the beauty of machines, it creates and introduces a mechanic aesthetics as a new- formative art by using industrial by-product. Third, there's a trait of nature. By Junk Art, there appears a trial to restore nature which has been neglected under the name of developing science technology. This expresses natural junk factor by emphasizing the nature itself using natural by-products. The Junk Art has influence on hairstyle and clothing and expands the expression world by some new ways and recognition about the benefaction and the damage of modern civilization.

  • PDF

Laboratory test of MEMS based astronomical adaptive optics

  • 유형준;박용선;채종철;양희수
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.65.1-65.1
    • /
    • 2011
  • We built a simple Adaptive Optics (AO) system at laboratory. This AO system is a step toward developing AO system for astronomical use. In this step, the AO system consists of He-Ne laser as a artificial light source, wavefront sensor, MEMS (Micro electro mechanical system) type deformable mirror and several lenses. MEMS deformable mirror allows the compact system at low cost and the only several mm sized collimated beam. We made Shack-Hartmann wavefront sensor using a lenslet array and a fast frame CCD. Its performance is verified using an artificial phase disturber and noting the movement of spot images by the lenslet array. The frame rate of the driving software is about 70 fps, depending on the control parameters. The characteristics of MEMS deformable mirror was measured which includes the voltage-to-deflection relation, influence function, and cross-talk. The total system is operated under closed-loop control for the artificial phase disturber and the wavefront is found to be compensated successfully.

  • PDF

유실된 도로에서 자동차의 떨어진 거리 측정 (Distance Measure of Vehicle in Lost on The Road)

  • 신성윤;백정욱;이양원
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.337-338
    • /
    • 2010
  • 포물체(projectile)란 지상의 대기 중으로 던진 물체를 말한다. 이 물체는 수직방향으로는 중력의 영향을 받고 공기의 저항을 무시한다면 수평방향으로는 힘을 받지 않기 때문에 포물선운동을 한다. 본 논문에서는 포물체의 운동을 이용하여 도로의 일부가 일정한 깊이로 유실되어 침강이 생긴 곳을 실험 대상을 한다. 여기에서 일정 속도로 달리던 자동차가 함몰된 도로의 가장자리 위를 넘어갔을 때 도로의 가장자리로부터 얼마나 멀리 가서 떨어지는지를 나타내었다.

  • PDF

HYSTERETIC MODELING ON THE CONVECTIVE TRANSPORT OF ORGANIC SOLVENT IN AN UNSATURATED SOIL ZONE

  • Lee, Kun-Sang
    • Environmental Engineering Research
    • /
    • 제11권5호
    • /
    • pp.241-249
    • /
    • 2006
  • A mathematical model is described for the prediction of convective upward transport of an organic solvent driven by evaporation at the surface, which is known as the major transport mechanism in the in-situ photolysis of a soil contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD). A finite-element model was proposed to incorporate the effects of multiphase flow on the distribution of each fluid, gravity as a driving force, and the use of hysteretic models for more accurate description of k-S-p relations. Extensive numerical calculations were performed to study fluid flow through three types of soils under different water table conditions. Predictions of relative permeability-saturation-pressure (k-S-p) relations and fluids distribution for an illustrative soil indicate that hysteresis effects may be quite substantial. This result emphasizes the need to use hysteretic models in performing flow simulations including reversals of flow paths. Results of additional calculations accounting for hysteresis on the one-dimensional unsaturated soil columns show that gravity affects significantly on the flow of each fluid during gravity drainage, solvent injection, and evaporation, especially for highly permeable soils. The rate and duration of solvent injection also have a profound influence on the fluid saturation profile and the amount of evaporated solvent. Key factors influencing water drainage and solvent evaporation in soils also include hydraulic conductivity and water table configuration.