• 융합신호처리학회논문지
• /
• 제13권3호
• /
• pp.162-165
• /
• 2012

본 논문에서는 차량의 흐름을 지체시키는 병목 지점에서 차량의 연료소비 감소를 위한 WAVE 방식 기반 V2V 및 V2I 의 정보 통신 기술을 이용하여 차량의 상대적인 속도를 제어하는 방법을 제안하였다. 연비 효율 비교 분석을 위한 모델을 제시하여 주기적으로 차량의 정차를 요하는 교통 신호등 방식보다 제안하는 방식이 병목 지점에서 연비 효율이 높아짐을 보였다. 또한 이 방식에서 병목지점에 진입하는 차량 간 속도 제어를 위한 감 가속도 유도 알고리즘을 제시하였다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.300-308
• /
• 2018

An online estimation method for wireless power transfer (WPT) systems is presented without using any measurement of the secondary side or the load. This parameter estimation method can be applied with a controlling strategy that removes both the receiving terminal controller and the wireless communication. This improves the reliability of the system while reducing its costs and size. In a wireless power transfer system with an LCCL impedance matching circuit under a rectifier load, the actual load value, voltage/current and mutual inductance can be reflected through reflected impedance measuring at the primary side. The proposed method can calculate the phase angle tangent value of the secondary loop circuit impedance via the reflected impedance, which is unrelated to the mutual inductance. Then the load value can be determined based on the relationships between the load value and the secondary loop impedance. After that, the mutual inductance and transfer efficiency can be computed. According to the primary side voltage and current, the load voltage and current can also be detected in real-time. Experiments have verified that high estimation accuracy can be achieved with the proposed method. A single-controller based on the proposed parameter estimation method is established to achieve constant current control over a WPT system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2143-2145
• /
• 1997

SV_PWM inverter for Induction motor drive system was designed at SIMULINK environment in MATLAB. This paper was performed the analysis of output current harmonics using DSP blockset. It was roved in this paper that SV_PWM method has been ore effective than triangle comparison PWM method on harmonic reduction at steady state.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.115-118
• /
• 2000

This paper describes the method to control the multimotor drive system with network. The LonWorks network which is a leading industrial control network is applied to the yard crane position control system driven by three motors. The host computer is able to control and monitor three motor drive systems in a yard crane through network. The performance of proposed method is verified on experiments with simulator of yard crane.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.107-112
• /
• 1989

This paper deals with strength analysis of tooth and method of manufacture of external tooth profile in harmonic drive. From the calculation of load imposed on the contact teeth, moximum contact stress is investigated to design the addendum modification coefficient. New tooth profile of the external gear is generated according to the law of gearing, assuming that internal gear has involute tooth profile. External tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$. The method to design cutter tooth profile is presented.

• 대한전기학회논문지
• /
• 제32권3호
• /
• pp.90-98
• /
• 1983

The method to improve the efficiency of a slightly loaded induction motor is suggested. It is based upon the optimal efficiency slip tracking by adjusting the voltage to frequency ratio(V/f). It is adopted the converter-inverter fed induction motor drive system. All the control loops are implemented bh the Z-80 microprocessor. By this method, 10% or more improvement is achieved at a few fraction of the full load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.9-12
• /
• 1998

In this paper, the power factor correction circuit using a parallel drive method is proposed so that the high power inverter air-conditioner with 3[ph] compressor motor may obtain the cost down and the improved performance. The adequate design procedures are presented to reduce the material costs by eliminating the power factor improving LC filter and derating output capacitor and inverter switches. Using the determined components, the prototype circuit with 6[kW] power consumption is built and tested to verify the operation of the proposed circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.116.1-116
• /
• 2001

In the near future, drive-by-wire systems will replace mechanical systems of vehicles. Since there would be no mechanical redundancy in the x-by-wire subsystem, it needs to improve the reliability of the system using fault diagnosis of sensors and actuators. This paper proposes a Kalman filter based fault diagnosis method for the vehicle with the drive-by-wire system, which includes steer-by-wire, brake-by-wire and throttle-by-wire systems. We will show that the proposed method is successful in fault detection and isolation for single sensor/actuator faults of the vehicle system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.977-982
• /
• 2001

In this paper, we deal with the analysis and optimum design of a disc drive feeding system. Using this proposed design method, we can determine an optimal step motor and lead-screw for the shorter seek time and required seek resolution. Simulation results show that this method can be potentially implemented in the design of a feeding system.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.273-281
• /
• 2010

본 논문은 교정가속수명시험법을 이용하여 액슬구동축의 피로수명을 예측하는 법을 제안한다. 교정가속 수명시험법은 수명예측, 시험시간 절감, 신뢰성 정량화시에 매우 효과적이다. 피로시험은 두 개의 고 부하 수준과 한 개의 저 부하 수준에서 수행되고, 외삽법을 사용하여 사용수준에서의 수명시간을 예측하게 된다. 본 논문에서는 수행시험 결과로부터 획득한 수명시간, 가속지수, 형상모수, 척도모수등과 같은 주요 신뢰성 인자들을 보여주고 있다. 액슬구동축의 수명예측은 부하스펙트럼 데이터와 시험데이터와의 비교 연구를 수행하여 검증하였다. 교정가속수명시험법을 사용한 수명예측법은 짧은 시간내에 수명을 예측하는데 매우 효과적인 방법임을 확인하였다.