• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.369-372
• /
• 2008

An experimental study is carried out to study two-phase vertically upward hydraulic transport of solid particles by water in a vertical and inclined (0${\sim}$60 degree) concentric annulus with rotation of the inner cylinder. Rheology of particulate suspensions in shear-thinning fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, and so on. Annular fluid velocities varied from 0.2 m/s to 1.5 m/s for the actual drilling operational condition. Macroscopic behavior of solid particles, averaged flow rate, and particle rising velocity are observed. Main parameters considered in this study were radius ratio, inner-pipe rotary speed, fluid flow regime, and particle injection rate. For both water and CMC solutions, the higher the concentration of the solid particles is, the larger the pressure gradients become

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.161-170
• /
• 2001

Synthetic water-based metal-cutting fluids are increasingly popular in the metal-working industry because of its environmental friendliness. The propose of this study is to investigate the synergistic effect of combining polyethylene glycol and common fatty acid in formulating a metal-cutting fluid. The tested metals were aluminum, copper and steel, and the test was performed with a modified drilling machine. From the study, it was found that there existed some synergistic effects on the drilling efficiency of the metals to decrease of cutting time, cutting energy, torque as well as the smoothness of surface depended on the formulation ratio of the two fluids.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1068-1072
• /
• 1997

This work deals with on investigation the influence of various additives to a base stock cutting fluid in order to develop a better deep hold drilling. This investigation has been aiming at developing an oil which gives a maximum cutting efficiency at a minimum wear rate of the tool and the guiding pads. The purpose of study is to analyze how guide pad of tools, workpiece and the change of contained quantity of extreme pressure additive in cutting fluids have effects on the hold over size of cutting hole, surface roughness of workpiece,wear rates of guide pad and roundness during the deep hole machining of SM55C with solid BTA drill by using BTA drilling system through experiment. Conclusion reached is as follows. It has been proved that the contained quantity of surphur more affects machinability than that of extreme pressure additive of chlorine of cutting fluid in BTA drilling during Deep Hole Drilling. Considering its base oil, the the contained quantity of extreme pressure assitive of surphur can be different, but it's judged that the range of 1.5 ~ 2.0% is suitable to machinability for workpiece in BTA drilling. Regarding guide pad, it's judged that the reduction of wear is possible in propotion to the contained quantity of exrreme pressure additive of chlorine against supporting of cutting force and Bumishing operation of machining parts in cutting.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.465-470
• /
• 2006

An experimental investigation is carried out to study 2-phase vertically upward hydraulic transport of solid particles by water and non-Newtonian fluids in a slim hole concentric annulus with rotation of the inner cylinder. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular fluid velocities varied from 0.2 m/s to 3.0 m/s. Pressure drops and average flow rate and particle rising velocity are measured. For both water and 0.2% CMC solutions, the higher the concentration of the solid particles is, the larger the pressure gradients become.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.145-150
• /
• 1999

As proven petroleum reserves decline through continued production. exploration for new oil and gas resources will extend into environments which present significant economic risks arid technical hurdles. Since safety is one of the biggest concerns in drilling operations. the oil industry routinely trains its personnel in areas which are critical for safe and economical drilling procedures. One of these major areas is well control. A kick is defined as an unscheduled flow of formation fluids into a wellhole. A kick occurs whenever the resultant wellbore pressure is less than the formation pressure in an exposed zone capable of producing kick fluids. The typical causes of reduced wellbore pressure are insufficient mud weight. inadequate fluid level in the hole, and swabbing.(omitted)

• Advances in environmental research
• /
• 제6권3호
• /
• pp.159-171
• /
• 2017

A successful oil well drilling depends largely on a good mud Program. During drilling, mud provides sufficient hydrostatic pressure, removes drill cuttings and cools drill bits. Mud additives are always required to provide sufficient hydrostatic pressure to ensure borehole stability. Barium Sulphate ($BaSO_4$) also known as barite is the prevalent weighting material but there is needed to develop local materials to augment the use of Barite. The present search is concerned on the early Carboniferous succession exposed in Um Bogma Formation, west central Sinai, Egypt as a new weighting agent in drilling fluids. The increases in the cost of drilling fluids and a shortage of using barite have introduced the locale dolomite as alternative weighting materials. The rheological properties of mud drilling samples weighted by local dolomite samples are being examined and investigated to know its potential to be used as a weighting material in drilling mud. Two mud samples were prepared which comprised of fresh water, caustic soda, bentonite and the weighting material. The weighting materials are added to achieve the required density. The first sample: Water-based mud with commercial barite of density between 10.00 lb/gm and 18.00 lb/gm. The second sample: Water-based mud with dolomite of density between 10.00 lb/gm and 18.00 lb/gm. These samples were analyzed and the density, rheological properties, aging of barite and dolomite and solid contents were investigated. At 10.00 lb/gm, the yield point of dolomite was $20.00lb/100ft^2$ and barite $22.00lb/100ft^2$ while the 10 second gel strength of dolomite was $30.00lb/100ft^2$ and $22.00lb/100ft^2$ for barite. Similarly, little difference was observed in plastic and apparent viscosities. At 10.00 lb/gm, the plastic and apparent viscosities of dolomite were 8.00 cp and 20.00 cp while barite was 8.00 cp and 24.00 cp. The result show that dolomite mud sample gave a little higher yield point and gel strength than barite mud sample. Therefore, dolomite has the potential to be used as weighting material in drilling mud in place of barite thereby enhancing the local content initiative of the government. When dolomite is sourced locally and used it will reduce overall mud and drilling costs.

• 한국지반공학회논문집
• /
• 제31권1호
• /
• pp.15-24
• /
• 2015

본 논문에서는 지반 시추시 공벽붕괴 방지를 위해 적용되는 시추 안정액(drilling fluid)의 다양한 배합설계에 따른 공벽붕괴 방지 효과에 대한 실험적 연구 결과를 다루었다. 이를 위해 먼저 벤토나이트 계열 안정액의 공벽 붕괴 방지 메카니즘을 검토하였으며 아울러 벤토나이트계 안정액의 배합(conditioning)에 따른 안정액의 성능지표 변화에 대한 실험결과를 간략히 기술하였다. 또한 지반시추(굴착) 및 안정액 투입을 간략히 모사하는 토조 장치를 구축하여 세립분이 20% 포함된 화강풍화토 및 모래지반을 대상으로 다양한 배합으로 조성된 벤토나이트계 안정액에 대한 실험을 수행하고 안정액 투입량, 수평 침투범위, 굴착가능 깊이 등을 측정하여 공벽붕괴 방지 효과를 고찰하였다. 그 결과 벤토나이트에 폴리머를 추가할 경우 안정액 투입량 및 수평 침투범위가 굴착가능 깊이가 증가하는 것으로 나타났으며 폴리머의 공벽유지 기능 향상 정도는 모래층보다 화강풍화토 지반에서 보다 뚜렷하게 발휘되는 것으로 검토되었다. 본 논문에서는 도출된 연구결과가 실무적 차원에서 지니는 의미에 대한 내용을 기술하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1010-1015
• /
• 2008

The rapid wear rate of cutting tools due to high cutting temperature is a critical problem to be solved in machining of hardened steel. Application of cutting fluid influences the performance of machining because of its lubrication and cooling actions. But, the environmental concerns call for the reduced use of cutting fluids in machining operations. Near-dry machining such as minimum quantity lubrication is regarded as one of the solutions to this difficulty. In the present work, cutting fluid was applied as a high velocity jet at the machining zone continuously at an extreme low rate using a fluid application system developed namely Electro Static Lubrication (ESL) during drilling of hardened steel. The performance of ESL has been compared with that of dry and MQL (minimum quantity lubrication) machining.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.53-62
• /
• 2016

본 논문에서는 해상 시추 시 공벽붕괴 방지를 위해 적용되는 시추 안정액(drilling fluid)의 다양한 배합설계에 따른 공벽붕괴방지 효과에 대한 실험적 연구 결과를 다루었다. 이를 위해 내염성점토와 벤토나이트 안정액의 공벽 붕괴 방지 성능을 비교하였으며 아울러 첨가제 혼합 시 안정액의 성능지표 변화에 대한 실험결과를 간략히 기술하였다. 또한 지반시추(굴착) 및 안정액 투입을 모사하는 토조 장치를 구축하여 세립분이 포함된 화강풍화토 및 모래지반을 대상으로 해수에 배합된 다양한 안정액에 대한 실험을 수행하고 안정액 투입량, 굴착가능 깊이 등을 측정하여 공벽붕괴 방지 효과를 고찰하였다. 그 결과 내염성 점토와 벤토나이트 모두 폴리머 첨가시 공벽붕괴 방지효과가 단일 안정액에 비해 증가하는 것으로 검토되었으며 첨가제로 CMC보다 폴리머가 우수한 것으로 검토되었다. 본 논문에서는 도출된 연구결과가 실무적 차원에서 지니는 의미에 대한 내용을 기술하였다.

• 한국광물학회지
• /
• 제20권1호
• /
• pp.21-33
• /
• 2007

벤토나이트의 분산/응집 거동은 시추이수의 성능에 큰 영향을 줌으로 주요 관심의 대상이 된다. 본 연구에서는 상업적으로 활용되고 있는 3종의 벤토나이트[2종의 CMC (carboxy-methyl cellulose)처리 벤토나이트와 1종의 무처리 벤토나이트]에 대하여 pH와 염분농도가 다른 용액에서의 분산/응집 특성을 분석하였다. 또한, 벤토나이트 현탁액의 점성 변화를 시추용 이수의 유동학적 측면에서 검토하였다. 벤토나이트의 분산/응집 거동은 비색분석법과 광분산법의 두 방법으로 측정되었으며, 광분산법으로 침전된 입자의 직경과 침전속도도 검토하였다. 벤토나이트의 종류와 수질에 따라 분산/응집 거동은 다양하게 나타났다. 초기 10분 동안에 모든 종류의 벤토나이트는 좋은 분산 특징을 보여주나, 이후에 CMC를 함유한 벤토나이트들은 다소 응집되는 특성을 보여주었다. 염수에서는 모든 시료들이 응집되는 특성을 보이여 응집속도는 염의 농도와 폴리머의 농도에 따라 변화하였다. 침전된 응집물의 부피는 염의 농도가 증가됨에 따라 감소하였다. 용액의 pH는 시료의 분산/응집 거동에 주요한 영향을 미치며, 응집 속도와 응집입자의 직경은 용액의 pH가 감소함에 따라 증가하였다. 반면에, 침전된 응집물의 부피는 pH가 증가됨에 따라 증가하였다. 응집 속도가 빠른 벤토나이트 분산용액은 점성이 낮았다. 다양한 환경에서 벤토나이트를 시추이수용으로 적용하고자 할 경우, 본 연구의 결과들은 유용한 자료로 활용될 수 있을 것이다.