• Geomechanics and Engineering
• /
• v.7 no.5
• /
• pp.553-567
• /
• 2014

Borehole instability during drilling process occurs frequently when drilling through shale formation. When a borehole is drilled in shale formation, the low permeability leads to an undrained loading condition. The pore pressure in the compressed area near the borehole may be higher than the initial pore pressure. However, the excess pore pressure caused by stress concentration was not considered in traditional borehole stability models. In this study, the calculation model of excess pore pressure induced by drilling was obtained with the introduction of Henkel's excess pore pressure theory. Combined with Mohr-Coulumb strength criterion, the calculation model of collapse pressure of shale in undrained condition is obtained. Furthermore, the variation of excess pore pressure and effective stress on the borehole wall is analyzed, and the influence of Skempton's pore pressure parameter on collapse pressure is also analyzed. The excess pore pressure decreases with the increasing of drilling fluid density; the excess pore pressure and collapse pressure both increase with the increasing of Skempton's pore pressure parameter. The study results provide a reference for determining drilling fluid density when drilling in shale formation.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.20-25
• /
• 2012

During drilling, the precipitation velocity of cuttings within an annulus depends on the density and configuration of the cuttings, and on the density, viscosity, and rheological characteristics of the drilling fluid. In directional drilling in particular, it is difficult to adjust and control the cuttings. In contrast to vertical drilling, it is very important to evaluate the flow characteristics of a drilling flow field. However, research on the transfer features of cuttings is inadequate. In this study, in order to identify transfer features of cuttings, an experiment was performed under wide-ranging conditions by constructing a slim hole annulus ($44mm{\times}30mm$) device. In this experiment, the particle volume fraction were influenced by particle size, particle concentration within the flow, pipe rotation, flow volume, and inclination of the annulus. In addition, a mathematical formula for volumetric concentration was deduced and compared to the test results and behavior of cuttings under the other drilling condition was made to be predicted. Therefore, this study can provide meaningful data for vertical and horizontal drilling, and for directional drilling.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.465-481
• /
• 2017

Thermal effect has great influence on wellbore stability in Dongfang 1-1 (DF 1-1) gas field, a reservoir with high-temperature and high-pressure. In order to analyze the wellbore stability in DF1-1 gas field, the variation of temperature field after drilling was analyzed. In addition, the effect of temperature changing on formation strength and the thermal expansion coefficients of formation were tested. On this basis, a wellbore stability model considering thermal effect was developed and the thermal effect on fracture pressure and collapse pressure was analyzed. One of the main challenges in this gas field is the decreasing temperature of the wellbore will reduce fracture pressure substantially, resulting in the drilling fluid leakage. If the drilling fluid density was reduced, kick or blowout may happen. Therefore, the key of safe drilling in DF1-1 gas field is to predict the fracture pressure accurately.

• Advances in environmental research
• /
• v.6 no.3
• /
• pp.159-171
• /
• 2017

A successful oil well drilling depends largely on a good mud Program. During drilling, mud provides sufficient hydrostatic pressure, removes drill cuttings and cools drill bits. Mud additives are always required to provide sufficient hydrostatic pressure to ensure borehole stability. Barium Sulphate ($BaSO_4$) also known as barite is the prevalent weighting material but there is needed to develop local materials to augment the use of Barite. The present search is concerned on the early Carboniferous succession exposed in Um Bogma Formation, west central Sinai, Egypt as a new weighting agent in drilling fluids. The increases in the cost of drilling fluids and a shortage of using barite have introduced the locale dolomite as alternative weighting materials. The rheological properties of mud drilling samples weighted by local dolomite samples are being examined and investigated to know its potential to be used as a weighting material in drilling mud. Two mud samples were prepared which comprised of fresh water, caustic soda, bentonite and the weighting material. The weighting materials are added to achieve the required density. The first sample: Water-based mud with commercial barite of density between 10.00 lb/gm and 18.00 lb/gm. The second sample: Water-based mud with dolomite of density between 10.00 lb/gm and 18.00 lb/gm. These samples were analyzed and the density, rheological properties, aging of barite and dolomite and solid contents were investigated. At 10.00 lb/gm, the yield point of dolomite was $20.00lb/100ft^2$ and barite $22.00lb/100ft^2$ while the 10 second gel strength of dolomite was $30.00lb/100ft^2$ and $22.00lb/100ft^2$ for barite. Similarly, little difference was observed in plastic and apparent viscosities. At 10.00 lb/gm, the plastic and apparent viscosities of dolomite were 8.00 cp and 20.00 cp while barite was 8.00 cp and 24.00 cp. The result show that dolomite mud sample gave a little higher yield point and gel strength than barite mud sample. Therefore, dolomite has the potential to be used as weighting material in drilling mud in place of barite thereby enhancing the local content initiative of the government. When dolomite is sourced locally and used it will reduce overall mud and drilling costs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.2
• /
• pp.107-116
• /
• 2017

When drilling operation is being performed, many physical and chemical changes are occurred near wellbore. To handle various changes of well condition and keep drilling process safe, additives of bulk, such as bentonite for increasing density of drilling mud, barite for increasing viscosity of drilling mud, polymer for chemical control, or surfactant, are added into drilling mud through a mud shear mixer. Because the achievement of the required material property through mud mixing system is essential to stabilize drilling system, it is of importance to analyze multi-phase flow during mud mixing process, which is directly related to increase mixing performance of the system and guarantee the safety of the whole drilling system. In this study, a series of liquid-solid flow simulation based on a computational fluid dynamics (CFD) are performed with comparing to solid concentration in experiment by Gilles et al. [2004] to understand the characteristics of liquid-solid mixing in a mud shear mixer. And then, the simulation-based design of shear mixer are carried out to improve mixing performance in a mud handling system.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3390-3397
• /
• 2022

Among the different techniques available, nuclear methods, including gamma-gamma logging tools, are of special importance. Though the real environment which surrounds the drilled borehole is a complex fractured medium which the fluid can flow through the porosities, simulation studies generally use the traditional model of a homogeneous mixture of formation and the liquid. Considering a previously published study, which shows that modeling of fluid flow in fractured reservoirs and simulating the formation as an inhomogeneous fractured medium leads to different results compared with those of homogeneous mixture, here we study the effect of the presence of drilling fluid (mudcake) on the response of the detectors in both the models. To study this effect, a typical gamma-gamma logging tool was modeled by using the MCNPX Monte Carlo code. The results show that the responses of the detectors in the mixture model in the presence of various thicknesses of mudcake are sensitive to the density of the formation material. However, this effect is not notable in the inhomogeneous fractured medium. These results emphasize the importance of the model employed for simulation of the medium in gamma-gamma well-logging.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.301-312
• /
• 2017

The concept of deep borehole disposal (DBD) for high-level nuclear wastes has been around for about 40 years. Now, the Department of Energy (DOE) in the United States (U.S.) is re-examining this concept through recent studies at Sandia National Laboratory and a field test. With DBD, nuclear waste will be emplaced in boreholes at depths of 3 to 5 km in crystalline basement rocks. Thinking is that these settings will provide nearly intact rock and fluid density stratification, which together should act as a robust geologic barrier, requiring only minimal performance from the engineered components. The Nuclear Waste Technical Review Board (NWTRB) has raised concerns that the deep subsurface is more complicated, leading to science, engineering, and safety issues. However, given time and resources, DBD will evolve substantially in the ability to drill deep holes and make measurements there. A leap forward in technology for drilling could lead to other exciting geological applications. Possible innovations might include deep robotic mining, deep energy production, or crustal sequestration of $CO_2$, and new ideas for nuclear waste disposal. Novel technologies could be explored by Korean geologists through simple proof-of-concept experiments and technology demonstrations.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.42-49
• /
• 2019

Drilling mud was used once in the step of separating the gas and powder they were transported to a surge tank. At that time, the fine powder, such as dust that is not separated from the gas, is included in the gas that was separated from the mud. The fine particles of the powder are collected to increase the density of the powder and prevent air pollution. To remove particles from air or another gas, a cyclone-type separator generally can be used with the principles of vortex separation without using a filter system. In this study, we conducted numerical simulations of air-particle flow consisting of two components in a cyclone separator in a mud handling system to investigate the characteristics of turbulent vortical flow and to evaluate the collection efficiency using the commercial software, STAR-CCM+. First, the single-phase air flow was simulated and validated through the comparison with experiments (Boysan et al., 1983) and other CFD simulation results (Slack et al., 2000). Then, based on one-way coupling simulation for air and powder particles, the multi-phase flow was simulated, and the collection efficiency for various sizes of particles was compared with the experimental and theoretical results.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.121-133
• /
• 2014

If the spent fuels or the high-level radioactive wastes can be disposed of in the depth of 3~5 km and more stable rock formation, it has several advantages. For example, (1)significant fluid flow through basement rock is prevented, in part, by low permeability, poorly connected transport pathways, and (2)overburden self-sealing. (3)Deep fluids also resist vertical movement because they are density stratified and reducing conditions will sharply limit solubility of most dose-critical radionuclides at the depth. Finally, (4) high ionic strengths of deep fluids will prevent colloidal transport. Therefore, as an alternative disposal concept to the deep geological disposal concept(DGD), very deep borehole disposal(DBD) technology is under consideration in number of countries in terms of its outstanding safety and cost effectiveness. In this paper, for the preliminary applicability analyses of the DBD system for the spent fuels or high level wastes, the DBD concepts which have been developed by some countries according to the rapid advance in the development of drilling technology were reviewed. To do this, the general concept of DBD system was checked and the study cases of foreign countries were described and analyzed. These results will be used as an input for the analyses of applicability for DBD in Korea.