• 터널과지하공간
• /
• 제22권4호
• /
• pp.257-265
• /
• 2012

본 연구에서는 드릴비트 내부 유로의 최적설계를 위하여 암분유동해석을 수행하였다. 이를 위해 암분과 기체의 다상유동해석이 가능한 전산유체역학 코드인 Star-CCM+을 사용하였다. 실제 천공시험으로부터 획득한 결과값을 기체 및 암분의 해석조건으로 적용하였다. 내부 유로 설계에 관련된 핵심인자를 3가지로 결정한 후, 다구찌 기법을 활용한 실험계획법으로부터 3가지 설계인자에 대한 최적값을 조사하였다.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.95-103
• /
• 2008

Diamond core drills are applied to drill difficult-to-cut materials. This paper proposes basic understanding of ceramic drilling mechanics and characteristics of main factors affecting tool life, tool wear, cutting force, and chipping thickness. In contrast to conventional drilling, the core drilling process make deep grooves on the workpiece. One difficulty of it is the evacuation of chips from the drilled groove. As the drilling depth increases, an increased amount of chips tend to cluster together and clog the groove. Eventually severe wear develops and diamond grits are separated from the drill body. To relieve the clogging problem and to evacuate chips from the groove easily, the helical drilling process is applied for the core drilling process. To analyze drilling characteristics and derive optimal drilling conditions, tool life, tool wear, cutting force, and chipping thickness are quantified through the monitoring system and the Taguchi method. Mathematical models for the tool life and chipping thickness are derived from the response surface method. Optimal drilling database has been constructed through the experimental models.

• Composites Research
• /
• 제30권1호
• /
• pp.35-40
• /
• 2017

본 연구에서는 천연섬유 복합재료의 홀 가공 인자를 최적화 하기 위하여, 진공 인퓨전 성형공정을 이용하여 천연섬유 복합재료를 제조하였으며 보강재로는 아마섬유를 사용하였다. 그 후 가공에 적합한 드릴을 설계하고, 선정된 가공조건에 따라 홀 가공을 수행하였다. 실험횟수를 최소화하기 위하여 다구찌 실험계획법을 사용하였으며, 홀 가공 후 가공면내 거칠기를 측정하고 거칠기비 분석을 통하여 그 결과를 비교하였다. 실험결과 천연섬유 복합재료의 가공 시 절삭저항을 분산할 수 있는 새로운 드릴을 설계하였다. 이 드릴을 사용할 경우 가공중의 절삭저항이 분산되었으며, 표면거칠기가 최소화된 천연섬유 복합재료를 얻을 수 있었다. 또한 홀 가공에 적합한 최적의 드릴 회전속도 및 이송속도를 선정하였다.

• 한국초지조사료학회지
• /
• 제41권3호
• /
• pp.205-209
• /
• 2021

Barnyard millet (Echinochloa esculenta) can be processed through soiling, hay, and silage, depending on the weather conditions during harvesting. However, research on barnyard millet is insufficient, and standards for cultivar, seeding density, and fertilizers have not been established. This study was conducted to examine the effects of seeding density and seeding methods on dry matter yields. For this, we used the early-maturing (Shirohie millet) variety of the barnyard millet. The experimental design included different seeding density (10 kg/ha, 15 kg/ha, 20 kg/ha (standard seeding density), 25 kg/ha and 30 kg/ha), and different methods of seeding (drill seeding and broadcast seeding). The seeding date was May 13, 2021, and the harvest date was July 13, 2021. Harvesting was carried out when the heading reached 40 %. Lodging occurred at 5, 9 and 7 at 20, 25 and 30 kg/ha densities in the broadcast seeding, but not in the drill seeding. With decreasing density of seeding, tillage number showed an increasing trend in both drill seeding and broadcast seeding (p>0.05). The plant heights were comparable in both drill seeding and broadcast seeding (p>0.05). The heading stage of barnyard millet was checked July 7 for drill seeding, and, on July 8 for broadcast seeding. It took 62 days, i.e., till July 13 for the heading to reach 40 % of the output. The dry matter yield of barnyard millet was significantly higher at the seeding density of 30 kg/ha, for both the methods of seeding (p<0.05). There was no difference in the chemical composition of grain, based on the seeding method and seeding density. However, as the seeding density increased, the CP, NDF, ADF, and TDN contents increased in both drill seeding and broadcast seeding. We found that, the dry matter content was the highest at the seeding density of 30 kg/ha for both the methods of seeding, but this was only 1.3 times higher than that of 10 kg/ha. Considering the seed price and labor force involved in seeding, it is advisable to have a seeding density of 15-20 kg/ha.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2005년도 춘계학술발표논문집
• /
• pp.79-82
• /
• 2005

본 논문에서는 PCB의 제작 공정에 있어 기준구멍을 가공하기 위한 다축드릴머신의 PCB와 드릴날 간의 충돌시험을 구하여 설계에 반영한다. 이는 PCB 가공을 대량생산에 적합하고 정확성을 높이기 위해 PCB용 다축드릴 머신을 설계함에 있어 해석결과를 이용하여 안전성확보와 제작단가를 절감할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.740-744
• /
• 2002

This paper describes the design and development of drills with deburring inserts. The drills can be used to drill holes and deburr the edges of the drilled holes simultaneously. The drills incorporate deburring inserts within the shank. The insert consists of a fixing base, a cantilever spring and a cutting tip. The stiffness of the cantilever spring and the details of the cutting tip play a central role for the successful deburring performance. The deburring performance is also governed by the conditions of the drilling burr best described by the burr control chart suggested by Dornfeld. With careful burr control, successful deburring is obtained by the drills with deburring inserts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.475-478
• /
• 2001

This study is to examine the safety by analizing the hardness of bed and the characteristic of vibration to improve basic efficiency of machine-tool of drill-cell which is a high line center. The mistake of existing design was shown through the analysis of 3-D and structure. The purpose of this study is to prevent from a problem which may happen after this and to produce more reliable machine-tool by carrying out and finding out an adequate countermeasure for bed at the cutting position.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.529-530
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1359-1360
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.851-852
• /
• 2010