• 한국전자통신학회논문지
• /
• 제6권2호
• /
• pp.268-273
• /
• 2011

태풍 및 해상 악천후에 견디며 무중단 운영, 실시간 관측할 수 있는 고급 사양의 부이식 파고 관측부이 시스템 개발 시급한 상황이다. 본 연구에서 부이식 파고관측 시스템을 국산화 개발하여 실시간 관측(풍속, 기온, 기압)를 부이에 추가하여 해양에 설치하고 해양의 자료를 실시간으로 전송하는 시스템 개발 하였다. 개발된 부이식 파고관측 시스템을 통하여 매년 해상에 투하하는 해양기상부이(표류형 파향파고계)의 수요를 충족할 것으로 기대된다.

• 한국지구과학회지
• /
• 제32권3호
• /
• pp.265-275
• /
• 2011

제주도 서부의 하모와 협재 해빈에서 표층 퇴적물과 해빈단면의 계절별 변화를 연구하였다. 또한 계절별 해빈사의 이동방향을 조사하였다. 하모해빈은 경사 $7.3^{\circ}-10.8^{\circ}$이며, 화산암 역과 패각편을 포함한 중립질 모래로 구성된다. 협재해빈은 경사 $2.8^{\circ}-6.5^{\circ}$이며, 조립질 패각편 모래로 구성된다. 하모해빈은 해빈 서쪽에 축조된 방사제의 영향으로 해빈 변형이 발생하는 것으로 추정된다. 협재해빈은 동계 동안 북서계절풍에 의해 사구 쪽으로 표사이동이 일어났다.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3970-3979
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal, circular oscillation is analyzed numerically and experimentally. The steady streaming velocities at the edges of the boundary layers on the bottom and side surfaces of the cylinder obtained in the previous paper are used as the boundary conditions in the governing equations for the steady flow motion in the interior region. The Stokes' drift velocity obtained in the previous paper also constitutes the Lagrangian velocity which is used in the momentum equations. It turns out that the interior steady flow is composed of one cell, ascending at the center and descending near the side surface, at the streaming Reynolds number 2500. However, at the streaming Reynolds number 25, the flow field is divided into two cells resulting in a descending flow at the center. The experimentally visualized flow patterns at the bottom surface agree well with the analytical solutions. The visualization experiment also confirms the flow direction as well as the center position of the cell obtained by the numerical solutions.

• 한국해양학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 1975

A marine geological investigation of the glass sand deposit in the beach along the west coast of Ahnmyeon Island, South Chung Cheong Province, Korea was carried out to solve the problen of sand material migration, textural properties of the sands and the glass sand reserve for future exploitation. Several bos coring analyses by means of the internal sedimentary structure.i.e., cross- stratification show significantly that most sands are moving and accumulation along the mean vector direction of $N20^{\circ}E-N60^{\circ}$ E in the area investigated. The average mean size of the sand sediments in the area studied ranges from 0.212mm to 0.275mm. The mechanism of sand migration in the area is considered to be interplay between longshore drift and flood tidal current. The sorting value of the sands ranges from 0.24 to 0.50. Therefore, these sand sediments are characteristic to be "well sorted". The average chemical composition of the glass sand in the area is the following: $SiO\_2$:-90.8%, $Al_2O_3$: -2.18%, $Fe_2O_3$:-0.73%, CaO:-1.79. The binocular microscope examination of the sands show that most of the sands are characteristically ice- clear quartz in mineral composition and their count percentage is mostly 92% or 96%.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.207-214
• /
• 1997

The objective of this study is to review the current stare of earthquake simulation techniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f.)and three d.o.f. aluminium shear models were used and 4m$\times$4m 6 d.o.f. shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in fourier transform amplitude. Free vibration and white noise tests have shown almost the same values for natural frequencies, but shown quite different values for damping ratios, that is, 1.37% in case of r\free vibration test vs 14.76% in case of white noise test. The time histories of story shear versus story drift show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• Earthquakes and Structures
• /
• 제9권6호
• /
• pp.1193-1219
• /
• 2015

The purpose of this study is to evaluate the seismic performance of high-rise reinforced concrete (RC) box-type wall structures commonly used for most residential buildings in Korea. For this purpose, an analytical model was calibrated with the results of the earthquake simulation tests on a 1:5 scale 10-story distorted model. This calibrated model was then transformed to a true model. The performance of the true model in terms of the stiffness, strength, and damage distribution through inelastic energy dissipation was observed with reference to the earthquake simulation test results. The model showed high overstrength factors ranging from 3 to 4. The existence of slab in this box-type wall system changed the main resistance mode in the wall from bending moment to tension/compression coupled moment through membrane actions, and increased the overall resistance capacity by about 25~35%, in comparison with the common design practice of neglecting the slab's existence. The flexibility of foundation, which is also commonly neglected in the engineering design, contributes to 30~50% of the roof drift in the stiff direction containing many walls. The possibility of concrete spalling and reinforcement buckling and fracture under the maximum considered earthquake (MCE) in Korea appears to be very low when compared with the case of the 2010 Concepcion, Chile earthquake.

• 한국통신학회논문지
• /
• 제25권8B호
• /
• pp.1469-1476
• /
• 2000

증가형 MOS FET에서 강반저의 경우 드레인 전류는 모두 드리프트에 기인하여 흐르기 때문에 I-V모델링시 수직전계와 수평전계를 함께 고려하여야한다. 특히 게이트전압 인가시 발생되는 수직전계는 표면이동도에 영향을 크게 주고 이로 인해서 캐리어들의 정상적인 흐름이 저해되는데 본 논문에서 제안한 다중 box분할법에 의하여 반전층의 깊이를 구하여 이동도 모델에 영향을 크게 미치는 반전층 내에서의 수직전계를 수치해석하였다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.383-397
• /
• 2018

Traditional base isolation systems focus on isolating the seismic response of a structure in the horizontal direction. However, in regions where the vertical earthquake excitation is significant (such as near-fault region), a traditional base-isolated building exhibits a significant vertical vibration. To eliminate this shortcoming, a rocking-isolated system named Telescopic Column (TC) is proposed in this paper. Detailed rocking and isolation mechanism of the TC system is presented. The seismic performance of the TC is compared with the traditional elastomeric bearing (EB) and friction pendulum (FP) base-isolated systems. A 4-storey reinforced concrete moment-resisting frame (RC-MRF) is selected as the reference superstructure. The seismic response of the reference superstructure in terms of column axial forces, base shears, floor accelerations, inter-storey drift ratios (IDR) and collapse margin ratios (CMRs) are evaluated using OpenSees. The results of the nonlinear dynamic analysis subjected to multi-directional earthquake excitations show that the superstructure equipped with the newly proposed TC is more resilient and exhibits a superior response with higher margin of safety against collapse when compared with the same superstructure with the traditional base-isolation (BI) system.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.361-377
• /
• 2012

Four Reinforced Concrete (RC) single span structural walls having various opening sizes and locations were constructed and tested under lateral reversed cyclic loading at the structural laboratory of Kyoto University. These specimens were scaled to 40% and represented the lower three stories of a six-storied RC building. The main purposes of the experimental tests were to evaluate the shear behavior and to identify the influence of opening ratios on the cracks distribution and shear strength of RC structural walls. The shear strength of the specimens was estimated by combining the shear strength of structural wall without openings and the reduction factor that takes into account the openings. Experimental and analytical results showed that the shear strength was different depending on the loading direction due to opening locations. A two-dimensional finite element analysis was carried out to simulate the performance of the tested specimens. The constructed finite elements model simulated the lateral load-drift angle relations quite well.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.31-37
• /
• 2009

This paper presents one and two dimensional simulation results with discontinuous features (shocks) of capacitively coupled rf plasmas. The model consists of the first two and three moments of the Boltzmann equation for the ion and electron fluids respectively, coupled to Poisson's equation for the self-consistent electric field. The local field and drift-diffusion approximations are not employed, and as a result the charged species conservation equations are hyperbolic in nature. Hyperbolic equations may develop discontinuous solutions even if their initial conditions are smooth. Indeed, in this work, secondary electron emission is shown to produce transient electron shock waves. These shocks form at the boundary between the cathodic sheath (CS) and the quasi-neutral (QN) bulk region. In the CS, the electrons emitted from the electrode are accelerated to supersonic velocities due to the large electric field. On the other hand, in the QN the electric field is not significant and electrons have small directed velocities. Therefore, at the transition between these regions, the electron fluid decelerates from a supersonic to a subsonic velocity in the direction of flow and a jump in the electron velocity develops. The presented numerical results are consistent with both experimental observations and kinetic simulations.