• 해양환경안전학회지
• /
• 제8권2호
• /
• pp.9-15
• /
• 2002

Ship operators use anchor dredging for the collision avoidance or safety of ship handling in a harbour or narrow channel. This paper clarifies the technique of the anchor dredging known as a common sense for. the seafarers A mathematical model at low speed range is established for the estimation of ship motion under the assumed environment, simulate the advance speed , and turning ability under the anchor dredging or not. The results shows good agreement with the conventional seamanship and their experiences as follows. Ahead speed used the anchor dredging is slower(speed reduction ratio:40%) than the normal ahead speed and the stopping distance is shorter (distance reduction ratio:40%)than the normal ahead distance without the anchor dredging.. Turning speed used anchor dredging is slower(speed reduction ratio:72%)than the normal ahead speed and the tactical diameter is shorter(distance reduction ratio:24%)than the diameter by the normal turning without the anchor dredging.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2002년도 추계학술발표회
• /
• pp.127-134
• /
• 2002

Ship operators are used to dredge anchor for the collision avoidance or safety of ship handling in a harbour or narrow channel. This paper clarifies the technique using tile anchor dredging known as a common sense for the seafarers. A mathematical model at low speed range has been established for the estimation of ship motion under the assumed environment , simulate the advance speed , and turning ability under the anchor dredging or not. The results shows good agreement with the conventional seamanship and their experiences as follows. Ahead speed used the anchor dredging is slower(speed reduction ratio:40%) than the normal ahead speed and the stopping distance is shorter (distance reduction ratio:40%)than the normal ahead distance without the anchor dredging. Turning speed used anchor dredging is slower(speed reduction ratio:72%)than the normal ahead speed and the tactical diameter is shorter(distance reduction ratio:24%)than the diameter by the normal turning without the anchor dredging.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.177-184
• /
• 2000

Geotube is a tube made of geotextile and hydraulically filled with dredged soil. This technological method has been widely used in the advanced countries of the world to build the shore protection embankment. The dredged contaminated sediments from the lake, river, and harbor can be pumped into the geotube by using the hydraulic pump. So, environments effects can be minimized and enhanced by using this method. This paper presents a field test result of a geotube in the land reclamation project for the Songdo New City construction site. The dredged silty clay was dredged by the dredging ship and hydraulically pumped into the geotube. The height of geotube was measured at every filling stage and also measured width and diameter of geotube with the elapsed time. The unit weight of soil and undrained shear strength of filled soil in a tube were measured at the various locations and heights of geotube with the elapsed time. Geotube technique can be effectively implemented for the silty clayey soil with using the dredging ship.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.7-11
• /
• 2020

When rivers and lakes are contaminated with numerous contaminants, usually the contaminants are finally deposited on the sediments of the waterbody. Many clean up technologies have been developed for the contaminated sediments. Among several technologies dredging is one of the best methods because dredging removes all the contaminated sediments from the water and the contaminated sediments can be completely treated with physical and chemical methods. However the most worried phenomenon is suspension of fine particles during the dredging process. The suspended particle can release contaminants into water and resulted in spread of the contaminants and the increase of risk due to the resuspension of the precipitated contaminants such as heavy metals and toxic organic compounds. Therefore the success of the dredging process depends on the prevention of resuspension of fine particles. Advanced dredging processes employ pumping the sediment with water onto a ship and release the turbid water pumped with sediment into waterbody after collection of sediment solids. Before release of the turbid water into lake or river, just a few minutes allowed to precipitate the suspended particle due to the limited area on a dredging ship. However the fine particle cannot be removed by the gravitational settling over a few minutes. Environmental technology such as coagulation and precipitation could be applied for the settling of fine particles. However, the process needs coagulants and big settling tanks. For the quick settling of the fine particles suspended during dredging process magnetic separation has been tested in current study. Magnetic force increased the settling velocity and the increased settling process can reduce the volume of settling tank usually located in a ship for dredging. The magnetic assisted settling also decreased the heavy metal release through the turbid water by precipitating highly contaminated particles with magnetic force.

• 한국산업정보학회논문지
• /
• 제13권5호
• /
• pp.29-43
• /
• 2008

본 연구는 컨테이너 선박의 대형화 추세에 따라 부산항 컨테이너 터미널의 수심에 대한 증심준설에 대한 사회적 타당성을 분석하기 위해 핵심적인 항만 사용자 집단의 니즈를 설문방식에 의해 탐색적으로 연구하고자 하였다. 이를 위하여 본 연구는 터미널운영회사, 선사, 도선사 등 3개 집단에 대해 각각 설문조사를 실시하였으며 수집된 자료는 빈도분석 및 교차분석 하였다. 연구 결과 북항의 항로수심 및 접안수심은 공히 16m 수준의 증심, 신항의 항로 수심은 17m 수준의 증심이 필요한 상황이며 우선적 중심이 필요한 부두는 감만, 신선대, 신항 및 자성대로 나타났다.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• 대한공간정보학회지
• /
• 제21권4호
• /
• pp.3-12
• /
• 2013

준설성과의 과학적 평가를 위해서는 준설공정을 실시간으로 모니터링하면서 작업을 관리하고 평가할 수 있는 시스템의 구축이 필요하다. 비콘DGPS를 이용하여 그래브 해상준설선의 유도와 준설측량 및 시공을 위한 실시간 준설시공관리시스템을 구축하였다. GPS에 의한 선박위치 측정, GPS/자이로스코프 통합장비에 의한 선박방향 측정, 그래브 위치측정, 준설심도측정 및 보정 등의 기능을 구현하였으며, 또한 구축된 준설공정관리시스템을 제어 운용하기 위한 프로그램을 개발하였다. 본 연구에서 구축된 시스템은 준설선을 정확한 위치로 유도하여 계획대로 준설을 수행할 수 있었으며 항만준설공사에의 적용성과를 통하여 그 효용성을 평가할 수 있었다.

• 한국지반신소재학회논문집
• /
• 제13권1호
• /
• pp.53-61
• /
• 2014

준설매립지반은 준설토에 의해 매립되어 지반이 매우 연약한 상태이며, 설계시 정확한 지지력을 예측하는 것은 더욱 힘들다. 실제 준설매립지를 대상으로 여러 가지 연약지반처리공법을 설계하고 있지만, 특히 준설토지반의 특성에 기인한 장비진입 즉 표층처리공법 또한 문제점을 안고 있다. 이러한 문제점을 개선하고자 연약지반에서 적용 할 수 있는 평판재하시험장치를 개발하게 되었다. 본 연구에서는 준설매립현장을 대상으로 현장에서 개발된 평판재하시험을 이용하여 현장시험을 실시하였으며, 아울러 콘테스트만의 결과를 가지고 준설토지반의 지지력을 구하는 실험식을 제안하고자 하였다. 대부분 준설매립지반은 매립경과시간에 따라 표면건조층의 두께가 달라지게 되므로 본 연구에서 제안한 실험식이 매우 효과적인 방법이라 판단되며, 향후 준설토 매립지반의 공법설계시 기초자료로 활용될 수 있을 것이다.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.66-71
• /
• 2006

To develope a hull form of catamaran type dredging vessel, resistance characteristics is investigated to find the interaction effect of waves between the two hulls. Re fore body shape is simplified as two dimensional wedge shape for the maintenance and disassembly/assembly. Based on MAC method, numerical simulation is performed in staggered variable mesh system. Re conservation form of Euler equations and continuity equation are applied as governing equations. To verify numerical methods, the wive patterns along the hull surface are compared with the results of model tests. This study is performed as varying wedge shape of the bow and the distance between the two hulls. The wave interaction between two hulls are observed to investigate the relation the resistance performance and the flow characteristics. Suitable hull form and distance between two hulls are discussed.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1993년도 정기학술강연회 발표논문 초록집
• /
• pp.9-13
• /
• 1993

Modernization of a port requires a considerable port facility expansion through grading up the cargo handling efficiency, increasing water depth of channels and basins to accomodate Large ships, etc. In many ports in the world, the needs of bigger ship calls in excess of conventional capacity of channels and basins demand for capital dredging as well as maintenance dredging resulting from siltation, and those activities are incurring heavy annual expenditure of the ports. (omitted)