• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.3
• /
• pp.3-14
• /
• 2004

A two-dimensional numerical model based on a finite volume method was formulated to solve the shallow water equations and applied for evaluating drainage characteristics at large-sized paddy fields. Manning roughness coefficient was calibrated using the observed inundating depths at drainage tests, and used for validating the model with the results from another drainage test. The simulated results were in good agreement with the observed inundating depths. The result of surface drainage showed that the longer width of the outlet was or the more the number of drainage outlet was, the shorter the drainage time was taken, and the larger the size of the field become, the longer the drainage time was taken, and the field shape had little effect on drainage time. To reduce the drainage time to 24 hours, the outlet is located lower than the elevation of the basin and small drainage ditch is constructed at the field. The results showed that the drainage time was taken short as the small drainage ditch was constructed. The comparison of drainage time as to the size of field constructed small drainage ditch showed the field, 100m ${\times}$ 200 m, can be drained in 24 hours.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.10-17
• /
• 2000

The change of fiber length, freeness, initial forming drainage velocity, specific filtration resistance, final drainage time and wet web dryness were measured to investigate the effect of the refining load on the drainage characteristics of pulp. The arithmetic average fiber length after refining with higher refining load was shorter than that obtained with lower refining load. Higher refining load decreased initial forming drainage velocity, final drainage time and wet web dryness. The refining load also affected the relationship between freeness and specific filtration resistance, initial forming drainage velocity, final drainage time. It was found that the specific filtration resistance is better than freeness to predict the drainage characteristics of pulp and the wet dryness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.25-33
• /
• 1999

A great difference in drainage time was observed from the recycled stocks between corrugated container board and its component papers, liner and medium paper. It could be assumed that the different drainage property should be caused from a starch adhesive present in the corrugated board. Thus, three types of starch such as dried Stein-Hall adhesive, cooked starch solution, and its dried film were added to linerboard stock in order to investigate the mechanism of drainage reduction. The water-swollen starch particles derived from Stein-Hall adhesive were drastically deteriorated the drainage time, even though the amount of starch is very small (2% or below). The drainage time of OCC was improved by 25% when amylase was used a new biological treatment. The results from the lab and mill test showed that the starch-degradable enzymatic treatment improves the drainage property as well as the reduction of calcium hardness.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.109-116
• /
• 1999

This study is to make clear for the characteristics of radial drainage consolidation/permeability At the result of the radial drainage consolidation / permeability test, the permeability of outflow drainage condition is higher than Inflow drainage condition and the time for the end of consolidation, outflow drainage condition is shorter than inflow drainage condition. So drainage area ratio test and control of hydraulic gradient test are carry out to analysis this result. Finally, compared with the characteristics on the condition of inflow and outflow permeability and consolidation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9391-9394
• /
• 2014

Purpose: To evaluate the effect of internal-external percutaneous transhepatic biliary drainage (IEPTBD) for patients with malignant obstructive jaundice. Methods: During the period of January 2008 and July 2013, internal-external drainage was performed in 42 patients with malignant obstructive jaundice. During the procedure, if the guide wire could pass through the occlusion and into the duodenum, IEPTBD was performed. External drainage biliary catheter was placed if the occlusion was not crossed. Newly onset of infection, degree of bilirubin decrease and the survival time of patients were selected as parameters to evaluate the effect of IEPTBD. Results: Twenty newly onset of infection were recorded after procedure and new infectious rate was 47.6%. Sixteen patients with infection (3 before, 13 after drainage) were uncontrolled after procedure, 12 of them (3 before, 9 after drainage) died within 1 month. The mean TBIL levels declined from 299.53 umol/L before drainage to 257.62 umol/L after drainage, while uninfected group decline from 274.86 umol/L to 132.34 umol/Lp (P < 0.5). The median survival time for uninfected group was 107 days, and for infection group was 43 days (P < 0.05). Conclusions: The IEPTBD drainage may increase the chance of biliary infection, reduce bile drainage efficiency and decrease the long-term prognosis, and the external drainage is a better choice for patients with malignant obstructive jaundice need to biliary drainage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.52-59
• /
• 2004

The greater Increase of the demand for environmental friendly materials especially for packaging industry leads to the larger interest in the reusable and recycable materials such as pulp mold. Although the pulp mold has great characteristics for packaging, some deficiency compared with other packaging material like EPS(Expandable Polystyrene) need to be overcome, for example, the relative higher cost. In this report, since the water drainage rate at the forming zone of a wet pulp mold process could have a great influence on the economical efficiency not only by increasing machine speed but also reducing the drying energy, the optimum ways for increasing drainage were investigated The mechanism of vacuum drainage In pulp mold forming was successfully evaluated by using RDA(Retention and Darinage Analyzer). Since the conditions of stock were greatly affected by the pulping time of low consistency pulper, the optimum pupling time was investigated with considerations of all stock preparation processes. The change of stock temperature and the addition of polyelectrolyte could improve the vacuum drainage rate. It was founded that the wire mesh types of mold former had a little influence on the retention because of the relatively mild vacuum drainage. However, the bigger size of dewatering hole showed better drainage rate and could reduce the plugging and con lamination of mold.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.697-704
• /
• 1995

This experiment was carried out to elucidate the effect of the midsummer drainage times and some growth regulators on lodging characters, lodging and yield in puddled-soil drill seeding in rice. Dongjinbyeo, the mid-late maturing rice variety was seeded at May 11 by seeding machine with 4cm of furrow depth. Experimental plots were divided two main treatment without midsummer drain and two time drains (30 and 50 days after seeding), Inabenfide(IBF) was applied 40days before heading(DBH) and IBP was applied at 30DBH, respectively. Culm length was shorten, the wall of N$_4$ was thicken, and the breaking weight was increased at two time drainage and growth regulators applied in order of Inabenfide, IBP, and Control. Lodging wasn't occurred at two time drainage but it was occurred at none drainage in the order of Control, IBP, and Inabenfide applied. Yield was higher at two time drainage compared with none drainage and higher in order of Inabenfide, IBP and Control in none drainage but wasn't significantly different among growth regulators applied in two time drainage. Therefore, two times midsummer soil drying is recommendable management method for puddled -soil drill seeding of rice. Rice, Direct seeding, Puddled-soil, Drill seeding, Midsummer drainage, Growth regulator, Lodging.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.409-414
• /
• 2010

The first drainage time in a day was controlled for precise irrigation management with low consumption of nutrient solution in tomato perlite bag culture system by measuring water level of drained water in drainage catchment part. This method automatically adjusted the irrigation time under any condition of light, temperature and humidity, resulting in stable water content in substrates. However, it was difficult to keep the time consistent as they were set. It drained with the deviation of 20 min in the treatment in which the first drainage time was set at 10:00 and 50 min in the treatment set at 10:30. The first drainage time was not constant, but the drain occurred stably before noon in the treatment of which irrigation frequency was longer than 30 min. The drainage ratio was better balanced in all the treatments using drainage level sensors than the treatment using time clock for irrigation control. High water and fertilizer efficiencies were obtained. Although the growth, total yield and sugar content were not significantly different between the treatments, fruit weight was higher in the treatments using drainage level sensors than that using timer.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.511-519
• /
• 2017

Multi-regional water supply system, which installed for supplying multiple water demands, is characterized by large-sized, long-distance, tree-type layout. This system is vulnerable to long-standing service interruption when a pipe breaks is occurred. In this study, a numerical method is proposed to calculate drainage time that directly affects time of service interruption. To begin with, governing equations are formulated to embed the delayed drainage effect by the friction loss, and to resolve complicated connection of pipelines, which are derived from the continuity and energy equations. The nonlinear hydraulic equations are solved by using explicit time integration method and the Newton-Raphson method. The developed model is verified by comparing the result with analytical solution. Furthermore, the model's applicability is validated by the examples of pipelines in serial, in parallel, and complex layout. Finally, the model is utilized to suggest an appropriate actions to reduce the deviation of draining time in the C transmission line of the B multi-regional water supply system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.215-218
• /
• 2012

We have carried out the experiment to investigate optimal drainage time of barley seeding synchronized with rice harvesting in paddy field. Number of emerged barley seedling on moist paddy field was less than that of common paddy field. It is very hard to plow using combine owing to long time to work on wet condition compared to drying condition of paddy field. According to the drainage time, growth and yield of barley were not significantly different. However, late drainage time decreased the spikes per $m^2$. Rice yield and 1,000 husked rice grain weight were not significant depending on drainage times at 15 days, 20 days and 25 days before barley seeding. The range of 1,000 husked rice grain weight was 21.7~22.2 g on different drainage conditions. In results, on considering of soil hardness and time of labor, the optimal contents of soil moisture was about 33%. This study reveals that drainage time at 20 days before barley seeding is proper to increase seedlings and yield.