• 한국환경생태학회지
• /
• 제27권1호
• /
• pp.52-63
• /
• 2013

본 연구는 2011년 6월부터 10월까지 지리적으로 인접하지만 다른 수계로 분류되는 전라북도 무주군 일대의 용담댐 하류역과 경상남도 합천군 일대의 합천댐 하류역에 각각 댐에 의한 방류의 영향을 보기 위하여 대상지점(YE-1, 2, 3; HE-1, 2, 3) 및 대조지점(YC-1, 2; HC-1, 2)을 선정하여 각 지점에서 출현하는 저서성 대형무척추동물의 종구성, 군집분석, 섭식기능군 및 서식기능군, 군집안정성을 분석하였다. 채집은 각 댐의 하류역에서 Surber net($30cm{\times}30cm$)을 이용하여 3회에 걸쳐 정량채집을 실시하였다. 조사결과 용담댐 하류지역에서 총 4문 6강 12목 33과 69종 6,369개체가 출현하였고, 하천의 주요 분류군인 EPT-group(Ephemeroptera, Plecoptera, Trichoptera-group)은 46종(66.7%)을 차지하였다. 합천댐 하류지역에서는 총 4문 5강 13목 44과 81종 5,728개체가 출현하였고, EPT-group은 45종(55.6%)을 차지하였다. 군집분석 결과 용담댐 하류지역에서 우점도지수는 0.27~0.50(Mean${\pm}$SD $0.38{\pm}0.09$), 다양도지수는 2.22~2.97($2.67{\pm}0.29$), 균등도지수는 0.63~0.76($0.72{\pm}0.06$), 풍부도지수는 4.43~7.06($5.69{\pm}0.99$)으로 분석되었고, 합천댐 하류지역에서 우점도지수는 0.40~0.81($0.59{\pm}0.18$), 다양도지수는 1.40~2.39($2.00{\pm}0.43$), 균등도지수는 0.38~0.68($0.56{\pm}0.13$), 풍부도지수는 4.04~5.80($4.95{\pm}0.70$)으로 분석되었다. 섭식기능군은 용담댐과 합천댐 하류지역 모두에서 filtering-collectors와 gathering-collectors가 대부분을 차지하였으며, 서식기능군은 burrowers, clingers, swimmers가 대부분을 차지하였다. 군집안정성 분석 결과 용담댐 유역의 대상하천에서 수환경 변화에 저항력과 회복력이 강한 I특성군에 속하는 집단이 더 많은 것으로 분석되었다. 합천댐 유역은 대조하천에서 수환경 변화에 대한 저항력과 회복력이 약한 III특성군에 속하는 종이 많은 것으로 분석되었다. 대형댐 하류지역의 하천생태계 안정성은 환경 변화 및 오염에 강한 I특성군에 속하는 군집이 좌우하고 있는 것으로 판단된다.

• 한국지구과학회지
• /
• 제31권6호
• /
• pp.563-572
• /
• 2010

흙댐에서의 누수 구역을 판별하기 위해 다채널 연속 온도 모니터링을 수행하고 이를 검증하기 위해 전기비저항 물리탐사를 함께 수행하였다. 일반적으로 댐이나 사면과 같은 인공구조물의 내부는 시간과 위치에 따라 상이한 온도 분포를 갖는 것으로 여겨진다. 이와 같은 분포는 구조물의 안전성을 판단하는 데 매우 중요한 기본 자료로 이용될 수 있으며, 특히 댐 구조물의 경우 과도 침투수나 누수에 의한 위험 대역을 파악할 수 있는 기술로 이용될 수 있다. 그러나 기존의 온도 측정 방식은 대형 구조물의 온도를 연속적으로 동시에 측정할 수 없는 단점을 가지고 있다. 본 연구에서는 이를 극복한 새로운 온도 모니터링 장비를 이용하여 댐의 상부 및 하부에 걸쳐, 여러 지점에서 동시에 온도 분포를 측정하였으며, 실내 시험을 통해 누수 대역이 온도 분포의 이상을 충분히 반영하고 있음을 관측하였다. 또한 대상 댐의 전 구역에 걸쳐 전기비저항 조사를 수행한 결과와 온도 모니터링 자료를 비교 분석하여 누수구역의 판별력을 높일 수 있는 방법을 제시하고자 하였다.

• 한국방재학회 논문집
• /
• 제4권3호
• /
• pp.43-50
• /
• 2004

본 연구에서는 갈수시 하천에 순간적으로 유입되는 오염물질에 대해 댐방류량 변화에 따른 플러싱 효과를 분석하였다. 한강하류부(잠실수중보${\sim}$신곡수중보)에 RMA-2 및 RMA-4 모형을 적용하였으며, 유로특성을 반영할 수 있도록 종확산계수는 $50m^2/s$을 사용하였다. 댐방류량은 1시간동안 $500m^3/s,\;1000m^3/s,\;1500m^3/s,\;2000m^3/s$로 변화시켰으며, 갈수시 유량은 $200m^3/s$로 고정하였다. 정체되어 있는 경우와 순간적으로 유입되는 경우, 성산대교 부근에서 농도가 1ppm 이하로 떨어지는 시간을 각 유량별로 분석하였다. 댐방류량이 증가할수록 희석시간이 단축되는 것을 알 수 있었고, 댐방류량과 희석시간이 선형관계가 있는 것으로 나타났다. 순간적으로 유입된 오염물질이 정체된 오염물질의 경우보다 댐방류량에 민감하게 영향을 받으며, 댐방류량에 의한 플러싱을 시도할 경우에는 본류의 오염물질이 지류로 역류하는 범위를 파악할 수 있었다.

• 한국환경과학회지
• /
• 제24권8호
• /
• pp.1085-1099
• /
• 2015

The purposes of this study were to suggest the methodology to select prior areas in the environmental pollution survey for livestock excreta (EPSLE) as well as to elucidate the validity of the methodology. In this study, the prior areas in the EPSLE were determined by examining the number of compost facilities categorized according to the three levels of size including the basin, the sub-basin and the watershed, respectively, based on the data from "Annual Nation-wide Pollution Sources Survey (2012)". The results suggested that the list of prior basins were Nakdong, Geum, Youngsan and Han river basins in order. Also, it was examined that the prior sub-basins in the four river basins including Nakdong, Geum, Youngsan and Han rivers were Naesung Stream, Geumgang Gongju, Juam Dam and Namhan Downstream, respectively. The prior watersheds in the sub-basins of Naesung stream, Geumgang Gongju, Juam Dam and Namhan Downstream were Seocheon Downstream, Geum Stream, Gyeombaek Suwipyo and Yanghwa Stream, respectively. The validity of the methodology used in this study was elucidated by analyzing the correlation of the number of compost facilities with the concentrations of T-N and T-P observed in the end-points of sub-basins. The results of correlation analysis showed that the concentrations of T-N and T-P increased with the number of compost facilities. Specifically, there was the stronger correlation between the number of compost facilities and the concentrations of T-N than that for T-P. Consequently, it was proved that the methodology used in this work was valid and rational for the selection of prior areas in environmental pollution survey for EPSLE.

• 물과 미래
• /
• 제25권3호
• /
• pp.115-124
• /
• 1992

상류댐에서의 홍수량에 의한 하류지점에서의 첨두 홍수량과 홍수 도달 시간은 수리학적 홍수추적방법에 의해 계산될 수 있다. 본 연구는 한강 유역의 전구간을 대상으로 시행되었다. 계산된 춤두 홍수량과 댐사이의 홍수도달시간은 상류에서의 방류계속시간과 바류량의 크기에 관련되어 있고 각 댐구간 사이에서 이 관계를 이용하여 다중회기모형을 제안하였다. 댐하류에서의 첨두홍수량은 수위-유량 관계식에 의해서 첨두홍수위로 변환될 수 있다. 그러므로, 제안된 다중회기모형은 상류댐에서의 홍수 방류량과 방류 계속시간에 의한 하류지점에서의 첨두홍수위와 댐구간 사이의 홍수도달시간을 예측하는데 이용될 수 있을 것이다.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.943-951
• /
• 2006

Spatial distribution of water pollution in the Gap Stream was investigated from October to November, 2005. Sampling was conducted three times including effluents discharged from a wastewater treatment plant (WWTP) and a dam reservoir during the low-flow period. As a typical urban stream, total nitrogen and inorganic nitrogen concentrations increased toward downstream. Ammonia concentration was the highest in the treated water of the wastewater treatment plant and the lowest nitrate concentration was found in the effluent of the dam reservoir. A part of soluble reactive phosphorous (SRP) in total phosphorous was 22~54% in the upstream reach of WWTP in the Gap Stream whereas 68~73% in the downstream reach. Mean chlorophyll-a concentration ranged from 1.6 to $11.0{\mu}g/L$ and it tends to increase toward downstream except for WWTP effluent. As expected, untreated wastewater and WWTP effluent were suggested as the major sources of water pollution in the Gap Stream. In this study, the water pollution of the Gap Stream is a significant undergoing typical eutrophication, caused by excessive phosphorus and nitrogen nutrients from WWTP located in the watershed. As a result, the critical factor for the water pollution was evaluated to dissolved inorganic nitrogen and phosphorus nutrients. Particularly, SRP is a most important for the eutrophication. It suggest that may occur in the most urban streams of Korean peninsula. Therefore, because the necessity of water pollution management in the urban stream, inorganic N and P nutrients should be included as an essential component of water quality criteria in the advanced water quality project of Korean Government by enforcing of water quality assessment and total maximum daily loads (TMDLs).

• Structural Engineering and Mechanics
• /
• 제36권4호
• /
• pp.481-497
• /
• 2010

The shaking table tests were conducted on two small-scale models (Model 1 and Model 2) to examine the earthquake-induced damage of a concrete gravity dam, which has been planned for the construction with the recommendation of the peak ground acceleration of the maximum credible earthquake of 0.42 g. This study deals with the numerical simulation of shaking table tests for two smallscale dam models. The plastic damage constitutive model is used to simulate the crack/damage behavior of the bentonite-concrete mixture material. The numerical results of the maximum failure acceleration and the crack/damage propagation are compared with experimental results. Numerical results of Model 1 showed similar crack/damage propagation pattern with experimental results, while for Model 2 the similar pattern was obtained by considering the modulus of elasticity of the first and second natural frequencies. The crack/damage initiated at the changing point in the downstream side and then propagated toward the upstream side. Crack/damage accumulation occurred in the neck area at acceleration amplitudes of around 0.55 g~0.60 g and 0.65 g~0.675 g for Model 1 and Model 2, respectively.

• 한국안전학회지
• /
• 제38권2호
• /
• pp.81-86
• /
• 2023

In this study, a one-dimensional numerical model was constructed to propose a flood control plan linked with the dam and river basin for the flood events of the Seomjin River in 2020. The flood level reduction of the downstream river was tested based on a scenario operation of the Seomjingang Dam and was also analyzed when a storage pocket was newly constructed as one of the river basin measures. It was confirmed that Seomjingang Dam's flood control capacity would be increased if the flood limit level was drastically lowered from the current EL. 196.5 m to EL. 188.0 m. In addition, if the upper area of the (old) Geumgok Bridge (which suffered great damage due to the loss of the levee) is used as a storage pocket, it would be effective in preventing floods in the lower area of it. In the era of the climate crisis, more integrated flood management is needed and basic river management must be observed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.208-220
• /
• 2007

Sixteen percent of a total of 18,000 dam facilities in Korea are reported to suffer problems related to seepage. It has also been observed that the natural frequency of torrential rainfall has increased quite significantly in recent years. Seepage in man-made structures combined with natural phenomenon may make the risk of dam failure higher, and can even lead to disasters for the people residing in downstream area. Thus, the social demands for the technology to prevent these disasters are higher than ever. In this contribution, we provide a brief review of technologies that are used to evaluate the structural safety of dams. We also discuss the results of three case studies where geophysical exploration methods (e.g. resistivity survey) were employed to find possible seepage zones of dam structures.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.87-112
• /
• 2018

In this study, it is aimed to present engineering software to estimate the structural response of concrete arch dam. Type-1 concrete arch dam constructed in the laboratory is selected as a reference model. Finite element analyses and experimental measurements are conducted to show the accuracy of initial model. Dynamic analyses are carried out by spectrum analysis under empty reservoir case considering soil-structure interaction and fixed foundation condition. The displacements, principal stresses and strains are presented as an analysis results at all nodal points on downstream and upstream faces of dam body. It is seen from the analyses that there is not any specific ratio between prototype and scaled models for each nodal point with different scale values. So, dynamic analyses results cannot be generalized with a single formula. To eliminate this complexity, the regression analysis, which is a statistical method to obtain the real model results according to the prototype model by using fitting curves, is used. The regression analysis results are validated by numerical solutions using ANSYS software and the error percentages are examined. It is seen that 10% error rates are not exceeded.