• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.342-350
• /
• 2009

Development of nanoparticulate materials technology is essential to processing of highly functional nanoparticulate materials and components with small and complex shape. In this paper, the effect of particle size on surface roughness and shrinkage of sintered Fe-8 wt%Ni nanopowder components fabricated by PIM were investigated. The Fe-8 wt%Ni nanopowder was prepared by hydrogen reduction of ball-milled Fe$_2$O$_3$-NiO powder. Feedstock of nanopowder prepared with the wet-milled powder was injection molded into double gear shaped part at 120$^{\circ}C$. After sintering, the sintered part showed near full densified microstructure having apparently no porosity (98%T.D.). Surface roughness of sintered bulk using nanopowder was less than 815 nm and it was about seven times lower than 7 $\mu$m that is typically obtainable from a sintered part produced from PIM.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.157-164
• /
• 1991

Microvel $^{\textregistered}$ double velour graft impregnated with a biodegradable algin was studied as a new vatscular graft. It is impervious to blood but still retains high porosity. This graft does not require preclotting during implantation and has good tissue ingrowth and biological healing properties. Two vascular grafts impregnated with algin (6mm in diameter) were implanted in the aorta of mongrel dogs without preclotting. Two identical grafts were preclctted and served as controls. The grafts were harvested 2 and 4 months postoperatively, and the healing pattern was examined by a light microscope after hemRtoxylineosin staining. It was observed that endothelial cells were incompletely covered on both algin-impregnated and control grafts after 2 month Implantation, while they were fully covered on both grafts after 4 month. There were no significant differences in subendothelial granulation tissue organization and fibrinoid material absorption between the algin-impregnated and control grafts. The algin-impregnated graft did not show any harmful effect on the healing and thus can be a new promising graft which is not necessary preclotting during the implantation.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.112-119
• /
• 1997

The modelling of carbon substances obtaining, for instance, carbon fibers which have high fire resistance, has been realized on the example of the polyacrylonitrile pyrolysis modelling. The pyrolysis is considered as a double step process when the formation of a liquid phase and the oxidation of substance are excluded. Three main reactions are considered: a) with the evolution of ammonia; b) with the evolution of hydrogen cyanide; c) with the evolution of hydrogen. Reactions b) and c) are sequential, and a) and b) are parallel. The problem is formulated as one-dimensional. The equations of energy, masses or concentrations, porosity and thermal conductivity are proposed. The mathematical model of the carbonization process is designed using tile kinetic characteristics of the above reactions and the thermodynamic parameters of reagents and products in these reactions. The equations received are calculated by Runge-Cutta method and by Adams method of the fourth order accuracy.

• 한국수소및신에너지학회논문집
• /
• 제30권5호
• /
• pp.418-427
• /
• 2019

Activated carbon was synthesized from bamboo charcoal by KOH activation at various temperatures for electrochemical double layer capacitor applications. The micro-structural and surface properties of all the samples were characterized by X-ray diffraction, scanning electron microscopy and N2 adsorption/desorption isotherm method. The electrochemical properties of the activated bamboo charcoal were examined by cyclic voltammetry in the potential window of -1.0 to 0.2 V in 6 M KOH electrolyte at different scan rates. An electrode made from the sample activated with 7.5 M KOH and heat treated at $750^{\circ}C$ for 3 h gave a maximum capacitance of 553 F/g at 1 mV/s and 450 F/g at 10mV/s.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.615-621
• /
• 2023

In this study, flow analysis of single, double, and triple filter systems of cylindrical structures was performed to analyze the flow characteristics of each filter. As a result of the flow analysis of the filter system, the number of filters and the pressure drop rate tend to be proportional to each other. It was found that the area passing through the inside of the filter had almost the same pressure. The maximum pressure drop rate of the triple filter system was about 14.9% for the forward-flow and about 12.4% for the reverse-flow. It was determined that the performance of the filter was stable within 20% of the allowable pressure drop rate of the filter system, which is the standard presented to the Korea Water Technology Certification Institute(KWTCI). In the future, a study on the decompression characteristics of the filter system according to the effect of the arrangement interval and filter density of the triple filter will be conducted.

• 한국작물학회지
• /
• 제46권6호
• /
• pp.459-463
• /
• 2001

벼 단작 만기 및 보리후작 건답직파의 수량성과 토양물리 과학성에 대한 기초자료를 얻고자 영남농업시험장 답작포장에서 1990년부터 1999년까지 10년간 시험을 수행하였다. 시험품종은 동해벼('90-'96), 금오벼2호, 화영벼('97-'98), 금오벼 1호, 영해벼('99)를, 작부방식은 벼 단작 만기직파와 보리후작 벼 직파를 하였고 보리후작 벼 직파는 보릿짚제거후 직파와 보릿짚 시용후 직파를 실시하였던 시험결과를 요약하면 다음과 같다. 1. 출아일수는 보리후작 건답직파는 8~9일로 벼단작 직파 9 일과 비슷하였고 $m^2$당 적정 입모 확보는 문제가 없었으나, 벼 단작 직파보다 입모수의 변이가 약간 컸으며 파종후 15~35일 초기생육에 있어 엽수는 비슷하였으나 초장은 2.8-10.7% 억제되었다. 2. 출수기는 처리간 차이가 없었고 초기 생육은 보리후작에서 약간 떨어졌으나 점차 회복되어 간장과 수장은 비슷하였으며 $m^2$당수수 증가로 영화수가 많았다. 3. 평균쌀수량('00~'99)은 보릿짚 시용구는 4.72 MT/㏊으로 벼 단작 직파보다 9%증수되었고 년차간 변이가 적었다. 4. 보리후작시 완전미 비율이 낮고 청미비율이 높아 품위가 떨어졌고 벼 단작과 비교시 이밀로즈함량, 단백질함량 및 Mg/K당량비는 비슷하였다. 5. 보릿짚시용시는 고상율이 낮아 토양공극율이 높고 토양 유기물이 증가되었으며('90(27.1 g/kg) $\longrightarrow$ '99(보릿짚시용 : 36.1 g/kg, 벼 단작 : 25.5 g/kg)) 치환성양이온 Mg 및 K의 함량은 벼단작과 비슷하였으나 Ca함량은 증가 되었다.

• 한국토양비료학회지
• /
• 제40권3호
• /
• pp.201-207
• /
• 2007

답리작 보리재배 후 보릿짚을 시용하고 관개량, 경운방법을 달리하여 만추벼를 전북통에서 2년 동안 재배시 토양이화학성, 작업정도, 생육 및 수량성을 검토한 결과는 다음과 같다. 보릿짚 시용 후 경운방법 및 관개량에 따른 작업정도는 마른로타리 1회 + 물 로타리 1회 처리구에서 경운 + 물 로타리 1회(관행)보다 보릿짚 피복정도가 적었고 결주율 2.6%, 부묘율 1.7% 낮았으며 관개량이 많을수록 결주율과 부묘율이 낮아지는 경향을 나타냈다. 토양이화학성 변화는 마른로타리 1회 + 물 로타리 1회 처리구 심토에서 토양경도, 용적밀도가 낮아지고 공극율, 기상율이 증가되어 토양물리성이 개선되었으며 마른로타리 1회 + 물 로타리 1회 처리구에서 CEC가 높아지고 유기물, 유효인산 함량이 증가되었으며 C/N율이 낮아져 토양화학성이 개량되었다. 경운방법에 따른 벼의 유효경비율은 마른로타리 1회 + 물 로타리 2회 > 마른로타리 1회 + 물 로타리 1회 > 경운 + 물 로타리 1회 > 물 로타리 1회 순으로 높았으며 쌀 수량은 $500Mg\;ha^{-1}$ 관개시 마른로타리 1회 + 물 로타리 1회, $700Mg\;ha^{-1}$ 관개시 마른로타리 1회 + 물 로타리 2회 처리구에서 수수 및 영화수 확보가 많았고 현미천립중이 무거워 경운 + 물 로타리 1회(관행) 대비 각각 7%, 5% 증수되었다.

• 한국토양비료학회지
• /
• 제34권2호
• /
• pp.110-116
• /
• 2001

벼 2모작 재배시 보릿짚시용후 질소시용량별 토양의 이화학적 변화와 수도체의 양분흡수량, 질소이용효율을 조사하기 위하여 2년간('97~'98) 전북통에서 시험한 결과는 다음과 같다. 보릿짚시용으로 경도, 용적밀도, 고상율이 낮아졌고 공극율과 기상율이 증가하여 토양의 물리성이 개선되었다. 보릿짚시용으로 벼 재배후 토양의 pH, OM, T-C, $SiO_2$, K, CEC가 증가한 반면 $P_2O_5$이 감소되었다. 보릿짚시용후 벼 재배시 토양중 $Fe^{+{+}}$함량은 분얼기~유수형성기까지 높은 함량을 보였으나 출수기에는 낮아졌고 $Mn^{+{+}}$함량은 증가되었다. 보릿짚시용시 수도체로의 시비질소 흡수량은 질소시용량 $126kg\;ha^{-1}$ 시용구까지는 증가하였으나 질소 $144kg\;ha^{-1}$ 시용구에서는 감소되었다. 또 질소시용량이 적을수록 보릿짚시용구에서 무시용구보다 시비질소 흡수기간이 길었다. 수도체로의 질소이용율은 분얼기에는 1% 전후였지만 최고분얼기부터 크게 증가하였고 보릿짚시용구에서 낮았다. 수도체로의 인산흡수량은 보릿짚시용구에서 질소시용량에 관계없이 모두 높았으나 칼리함량은 낮았다.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.78-83
• /
• 2010

본 연구에서는 SBFC의 기본 성능을 분석하고, 페이스트 및 모르터에서의 공학적 특성을 검토하여, 향후 경제적인 조강콘크리트 개발을 위한 방안으로 활용하고자 하였다. 실험결과 SBFC의 우수한 조기강도 발현 성능을 확인 할 수 있었고, 유동성을 고려했을 때 OPC와 SBFC와의 적정 혼입율을 도출하여 사용하는 것이 바람직 할 것으로 판단된다.