• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.153-154
• /
• 2022

When reinforcing an existing building with the Concrete Filled Tube(CFT) structure, it is impossible to form a diaphragm inside with the existing method. Therefore, in this study, a construction method was proposed so that the force could be transmitted using the friction force between the diaphragm and the concrete using a double diaphragm.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.18-24
• /
• 2011

본 논문에서는 double boss 구조의 저압용 압력 센서의 다이아프램 브리지 모서리에 홈을 형성함으로서 압력센서의 내압특성을 향상시킬 수 있음을 확인하였다. 저압용 실리콘 압력센서에서는 일반적으로 boss구조가 널리 사용되고 있으나 칩에서의 제한된 다이아프램의 사이즈와 두께로 인하여 좋은 감도를 얻을 수는 없다. 특히, double boss구조는 다이아프램의 브리지 모서리 응력이 크게 작용함에 따라서 크랙이 생겨 다이아프램의 파괴가 진행되어 센서의 감도는 우수하지만 동작영역의 범위가 줄어들어 신뢰성에 문제가 있다는 단점을 가진다. 기존 double boss구조 압력센서 다이아프램 브리지에 모서리 홈의 길이를 $0.5{\sim}10{\mu}m$로 변화시키며 ANSYS 시뮬레이션을 시행하여 다이아프램 브리지 모서리와 브리지의 가장자리 그리고 압저항 소자가 위치하는 곳의 최대응력을 확인하였다. 그 결과 브리지 모서리의 길이가 6${\mu}m$이상인 경우, 브리지 모서리에서 발생하는 응력은 압저항 소자에 작용하는 응력보다 적다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.195-201
• /
• 1996

The dynamic characteristics of externally pressurized journal bearing have been studied theoretically. The Reynolds' equation has been solved by FDM, and the dynamic coefficients have been calculated by using perturbation method. The bearing is compensated by orifice or double-pad diaphragm control valve. The effects of diaphragm initial gap and stiffness are considered. As the results of analysis, it is shown that a control valve has better performance than orifice.

• 센서학회지
• /
• 제30권5호
• /
• pp.273-278
• /
• 2021

Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.13-29
• /
• 2001

주기적으로 변하는 압력이 loose 또는 tight fitting 상태의 콘택트렌즈와 같은 diaphragm에 작용하여 진동이 발생하는 경우 diaphragm의 가장자리(edge)는 단순지지(simply supported) 또는 고정(rigidly clamped) 상태로 가정할 수 있으며, 이러한 가정하에 diaphragm의 진동을 해석할 수 있는 미분방정식과 그 해를 구하는 컴퓨터 프로그램을 작성하였으며 이 컴퓨터 모델을 사용하여 진폭 및 출력을 예측하고 diaphragm의 반경 및 두께, damping, 작용하는 압력의 진동수 등 제반 변수가 진동에 미치는 영향을 모사하였다. 외부 압력의 진동수가 어떤 범위 이상에서는 diaphragm의 파형은 한 개의 peak를 가지는 원호형에서 2개의 peak를 가지는 파도형으로 전환되며 이 때 진동수가 증가함에 따라 diaphragm의 바깥 부분의 peak가 안쪽 peak보다 높아지는 것을 알 수 있다. 이러한 경향이 시작되는 진동수는 diaphragm의 가장자리가 단순지지된 경우가 clamped 된 경우보다 훨씬 낮다. 단순지지된 diaphragm의 진동은 고정단 진동에 비하여 기본 공진(fundamental resonance)이 월등히 낮은 진동수에서 발생하며, 따라서 저주파 영역에서는 진동수가 낮아질수록 두 진동간의 진폭차가 커지지만 고주파 영역에서는 그 차이가 미미하게 된다. 또한 단순지지 diaphragm의 진동의 특징은 진동수의 증가에 따라 여러개의 공진(harmonics)이 발생하지만 전체적으로 진폭은 급격하게 감소한다. 그러나 저주파 영역에서 단순지지 진동의 진폭이 크다고 해도 출력은 낮기 때문에 diaphragm의 진동에 따른 출력(power)은 특정 진동수에서 하나의 주 peak를 갖는다. 단순지지된 diaphragm이 진동할 때 diaphragm의 출력 공진진동수는 두께가 증가할수록 감소한다. 이 경우 형성되는 harmonics의 출력은 기본공진의 강도에 비해 현저하게 떨어지는 것이 진폭의 경우와 대조적이다.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.747-759
• /
• 2021

Built-up Double-I (BD-I) columns have been commonly used for mid-rise steel-frame structures in Iran. These columns consist of two hot rolled IPE sections which are connected by two cover plates and fillet welds. Until 2017, BD-I columns were employed in intermediate moment resisting frames (MRF) using welded flange plate (WFP) connections. To evaluate the seismic behavior of the connections, four samples were made and tested based on cyclic loading according to AISC 341-16. It was concluded that typical samples cannot satisfy the seismic provisions related to intermediate MRFs. In contrast, the proposed connections retrofitted with two-part external diaphragms were able to satisfy not only the seismic requirements related to intermediate MRFs but also those related to special MRFs according to AISC. The numerical modeling of these samples was performed using ABAQUS finite element software. This study compared the hysteresis moment-rotation curves, plastic strains, and behavior modes in both experimental samples and numerical models.

• 소성∙가공
• /
• 제23권1호
• /
• pp.10-15
• /
• 2014

Recently, micro-speakers have attracted much attention due to their increasing demand in mobile devices. Micro-speakers use polymer diaphragms, which are manufactured from thin polymer film by the thermoforming process. The diaphragm is generally designed to be a circular membrane with a cross section consisting of a double dome structure, and a number of corrugations are located in the outer region to produce better sound quality. In the current study, a finite element (FE) analysis is performed for thermoforming, and the resulting thickness reduction in the corrugation regions is estimated. The estimated thickness distribution is used in further structural and modal FE analyses, from which the effects of local thickness reduction on the stiffness and vibration characteristics are determined.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.790-796
• /
• 2013

Micro-speaker diaphragms play an important role in generating a desired audio response. The diaphragm is generally a circular membrane, and the cross section is a double dome, with an inner dome and an outer dome. To improve the sound quality of the speaker, a number of corrugations may be included in the outer dome region. In this study, the role of these corrugations is investigated using two kinds of finite element method (FEM) calculations. Structural FEM modeling was carried out to investigate the change in stiffness of the diaphragm when the corrugations were included. Modal FEM modeling was then carried out to compare the natural frequencies and the resulting vibrational modes of the plain and corrugated diaphragms. The effects of the corrugations on the vibration characteristics of the diaphragm are discussed.

• 화약ㆍ발파
• /
• 제20권3호
• /
• pp.59-71
• /
• 2002

The points of this design case are the planning and excavation method of a new double-tracked railroad tunnel which is approx. 11∼22 meters apart from existing single-tracked railroad tunnel. For the optimum excavation method some needs are required in design stage, such as the reduction of noise and vibration, public resentment, damage of buildings and construction costs. Hence the estimation and application of allowable noise and vibration criterion is important. The ground coefficient (K, n) of this site is determined by field trial blasting. The excavation method is chosen to satisfy the allowable noise and vibration criterion. In addition, in order to ensure the stability of existing single-tracked railroad tunnel, the instrumentation of maintenance level is accompanied during the construction stage. As a result of this design condition, central diaphragm excavation with line drilling and pre-large hole boring blasting is applied to the area within 15 meters apart from existing tunnel. And above 15 meters apart, pre-large hole boring blasting is designed.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.59-62
• /
• 2007

The basic concept and preliminary performance results of a miniaturized electroosmotic (EO) pump with diaphragms were included in the present study. The separation of an electroosmotic pumping liquid from a drug using diaphragms is mainly to have a freedom in choosing an electroosmotic pumping liquid and to achieve the optimal drug delivery, and, preferably its precise control. We performed maximum flow rate, maximum pressure, and maximum current measurements with and without diaphragm designs. As a result, the effect of diaphragms on pump performance at the maximum condition is small. However, the presence of diaphragms does not allow indefinite continuous pumping.