• 한국강구조학회 논문집
• /
• 제18권3호
• /
• pp.339-347
• /
• 2006

2거더 철도교량의 사용성, 특히 부모멘트 영역의 휨강성을 증대시키기 위해서 이중합성단면이 제안되었다. 이 논문에서는 제안된 이중합성구조를 갖는 5m-5m의 연속 2거더 교량 모델에 대한 실험적 연구를 수행하였다. 교량 모델에 대한 실험적 연구를 통해서 유효폭,전단연결부, 이중합성단면의 극한강도에 대한 설계 고려사항을 연구하였다. 하부 콘크리트 바다판의 전단열결부는 완전합성 거동을 나타내어 제안된 경험식의 타당성을 검증하였다. 이중합성단면의 휨거동을 통해서 하부 콘크리트 슬래브의 유효폭은 압축을 받는 콘크리트 슬래브의 유효폭으로 계산될 수 있다. 교량모델의 극한 휨 강도 평가에서 이중합성단면의 완전소성해석이 타당함을 밝혔다. 실험결 과에 근거한 설계사항들이 제안되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권1호
• /
• pp.49-56
• /
• 2007

기존의 Double T-Beam은 단면 형상이 갖는 단순함과 세련된 도시적 미관을 갖추고 있기 때문에 미국이나 유럽 등지에서 적극 시공되고 있으나 역학적 저항능력이 상대적으로 취약할 뿐만 아니라 제한된 특수 시공 방법을 사용해야 한다는 문제점이 있다. 이에 본 연구에서는 기존의 Double T-Beam의 문제점을 해결하기 위해 콘크리트와 강재의 장점만을 취합한 강합성 보를 사용하였고, 긴장력을 도입하여 구조적으로 보다 안정성을 갖춘 프리스트레스트 강합성 Double T-Beam의 개발 가능성을 제시하고자 하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.332-340
• /
• 2016

A design optimization is performed for the double-bolted joint in cylindrical composite structures by using a simplified analytical method. This method uses failure criteria for the major failure modes of the bolted composite joint. For the double-bolted joint with a zigzag arrangement, it is necessary to consider an interaction effect between the bolt arrays. This paper proposes another failure mode which is determined by angle and distance between two bolts in different arrays and define a failure criterion for the failure mode. The optimal design for the double-bolted joint is carried out by considering the interactive net-tension failure mode. The genetic algorithm (GA) is adopted to determine the optimized parameters; bolt spacing, edge distance, and stacking sequence of the composite laminate. A purpose of the design optimization is to maximize the burst pressure of the cylindrical structures by ensuring structural integrity. Also, a progressive failure analysis (PFA) is performed to verify the results of the optimal design for the double-bolted joint. In PFA, Hashin 3D failure criterion is used to determine the ply that would fail. A stiffness reduction model is then used to reduce the stiffness of the failed ply for the corresponding failure mode.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.621-640
• /
• 2017

The double-row long-short composite anti-sliding piles system is an effective way to control the landslides with high thrust. In this study, The double-row long-short composite anti-sliding piles with different load segment length (cantilever length) and different pile row spacing were studied by a series of physical tests, by which the influences of load segment length of rear-row piles as well as pile row spacing on the mechanical response of double-row long-short composite anti-sliding pile system were investigated. Based on the earth pressures in front of and behind the piles obtained during tests, then the maximum bending moments of the fore-row and the rear-row piles were calculated. By ensuring a equal maximum moments in the fore-row and the rear-row piles, the optimum lengths of the rear-row piles of double-row long-short composite system under different piles spacing were proposed. To investigate the validity of the reduced scale tests, the full-scale numerical models of the landside were finally conducted. By the comparisons between the numerical and the physical test results, it could be seen that the reduced scale tests conducted in this study are reliable. The results showed that the double-row long-short composite anti-sliding piles system is effective in the distribution of the landslide thrust to the rear-row and the fore-row piles.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.5-8
• /
• 2002

The use of the co-cured joining method for composite structures is attractive due to several benefits. However, since the design stress level in cyclic loads is often smaller than the joint strength obtained from the static tensile load test, it is important to establish proper fatigue design criteria. Although some researchers have reported on co-cured joints, there are only a few papers published on the fatigue characteristics of co-cured joints. In this paper, the effect of bond parameters on the fatigue characteristics of a steel-composite co-cured double lap joint under cyclic tensile loads was experimentally investigated. We considered the surface roughness of the steel adherend and the stacking sequence of the composite adherend as bond parameters. A fatigue failure mechanism of the co-cured double lap joint was explained systematically by investigating the surfaces of failed specimens.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.50-61
• /
• 2015

This paper presents on the structural behavior of the the methyl methacrylate monomer (MMA) double wide flanged the glass fiber-reinforced polymer(GFRP) pipe composite structures for the manhole raise. The evaluation of structural performance on this composite structure was conducted by the axial load, fatigue load, and ultimate load test. The assessment indicates that the MMA double wide flanged GFRP pipe composite structures was confirmed safety, durability and reliability in result as expected. It was found that this composite structure was able to short working times to around 30-50% and construction costs to around 10-23% with compare other construction methods. Also, environmental pollution and civil complaints will be prevented because there will be no longer any noises, vibrations, dust, or construction wastes.

• 대한산업공학회지
• /
• 제5권1호
• /
• pp.7-17
• /
• 1979

A procedure for constructing a double sampling plan with zero acceptance number for the first sample whose combined sample size does nat exceed that of the given single or double sampling plan is studied. Using this procedure a double sampling system is proposed that can be used in place of MIL-STD-105D system when the quality history is good, and its composite quality characteristics are tabulated and compared with those of MIL-STD-105D system. The study reveals that composite ASN's of the proposed double sampling system are considerably smaller than those of corresponding MIL-STD-105D system with no appreciable changes in other composite quality characteristics. The procedure is also applied to K SA 3102 plans with similar results. A cost model that can be used in comparing a given single sampling plan with the proposed double sampling plan is also developed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2001

Co-cured joining method is an efficient joining technique because both curing and bonding processes for the composite structures can be achieved simultaneously. It requires neither an adhesive nor a surface treatment of the composite adherend because the excess resin, which is extracted from composite materials during consolidation, accomplishes the co-cured joining process. In this paper, we considered three bond parameters, affecting tensile load bearing capacity of the co-cured single and double lap joints. Filially, we nave presented optimal bonding conditions for co-cured single and double lap joints with steel and composite adherends under tensile loads.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.653-661
• /
• 2019

In this paper aeroelastic behavior of 3-phase nano-composite beam-plate with double delaminations is investigated. It is tried to study the effect of carbon nano-tubes (CNTs) on critical flutter pressure of reinforced damaged nano-composite structures. In this case, the CNTs are appending to the polymer matrix uniformly. The Eshelby-Mori-Tanaka model is used to obtain the effective material properties of 3-phase nano-composite beam-plate. To investigate the aeroelastic behavior of delaminated beam-plate subjected to supersonic flow, it is assumed that the damaged segments are forced to vibrate together. The boundary conditions and auxiliary conditions at edges of delaminated segments are used to predict critical flutter pressure. The influence of CNTs and different delamination parameters such as delamination length, axial position and its position through thickness are investigated on critical flutter pressure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.173-176
• /
• 2003

Progressive failure analysis of steel composite double T-beam is performed to investigate the mechanical effects of steel composite fabricated in the webs of double-T beam to replace concrete placing forms. The analysis is based on nonlinear finite element scheme considering material nonlinearities of concrete, reinforcing bar and PS steel. Four-parameter strength envelope defines the hardening and softening phenomena of concrete with consideration of the various levels of confining pressures. Rankine maximum strength criterion defines the elasto-plasticity of PS steel and reinforcing bar, and Von Mises $J_2$ failure criterion for steel plate which wraps the concrete webs of double T-beam. A 6m long two-span steel composite double T-beam is analyzed and compared with the experimental results.