• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.26-32
• /
• 2005

홈 네트워크 서비스의 활성화와 이를 기반으로 한 새로운 수익 모델 발굴을 위해 홈 네트워킹 기술에 대한 표준화와 시범사업이 이루어지고 있다. 흠 네트워크 모바일 서비스는 휴대폰을 이용하여 언제 어디서나 홈 서버와 연동된 흠 게이트웨이를 통해 댁내의 정보가전과 홈 자동화 기기의 상태 확인과 제어를 가능하게 한다. 이를 위해 휴대폰의 홈 네트워크 모바일 어플리케이션은 흠 서버와 연동하여 댁내의 정보 가전과 흠 자동화 기기의 구성에 대한 설정과 변경을 확인할 수 있어야 할 것이다. 본 논문에서는 XML을 이용하여 댁내 정보가전과 홈 자동화 기기의 구성에 대한 자동 설정 방식을 제안하였다. 제안된 흠 네트워크 모바일 어플리케이션은 국내 모바일 표준 플랫폼인 WIPI를 사용하여 구현하였다.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.761-766
• /
• 2010

본 연구는 등가가스를 이용하여 다양한 조성의 천연가스에 대한 부분예혼합 가스기기의 호환성 판정법을 실험을 통하여 검토 제시하였다. 본 판정법을 위해, 가정용 가스레인지를 이용 등가가스와 천연가스의 화염을 비교 하였으며, 화염의 부상 및 불완전연소에 대해 측정을 하여 KS 규격과 비교하였다. 그 결과, 등가가스와 천연가스의 화염은 화염길이, 화염색, 화염모양 등의 차이가 거의 없었다. 또한 화염의 부상 발생은 웨버지수 51 MJ/$m^3$ 이상에서 안정함을 보였으며, 불완전 연소지수의 경우, 웨버지수 56.3 MJ/$m^3$에서 CO 농도가 95~100 ppm 정도를 보여주었다. 결과적으로 천연가스에 대한 화염의 부상과 불완전연소에 대해 호환 범위를 웨버지수 51~56.3 MJ/$m^3$로 제안하였으며, 이 범위 내의 천연가스는 국내 가정용 부분예혼합 가스기기에 대해 호환 가능하다는 의미이다.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.473-478
• /
• 2005

In home appliances, electric energy is optimally controlled by using power electronics technology, creating a comfortable environment in terms of energy saving, low sound generation, and reduced time consumption. Usually simplicity and robustness make the three phase induction motor attractive for use in domestic appliance, including washing machines. Two main fpes of domestic washing machine have evolved. We focus on the front loading machine favored in Europe, which has a horizontal drum axis. With the advent of electronic control, universal motor, with a phase controller operating directly from the ac source, has become popular in washing machine. The efficiency improvement in home appliances is very important for customers. Induction motor efficiency can be improved by means of loss reduction, which can be realized by motor selection and design, improvement of the waveforms supplied by power inverter, utilizing a suitable control method. So this paper describes the architecture and feature of washing machine fed induction motor drive under minimizing losses vector control.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.69-75
• /
• 2007

In this study, the difference of flame stability zone for natural gases from producing districts was studied experimentally using a new type of flame stability diagram. The similarity of stable flame zone between a domestic appliance and an interchangeability test(IT) burner is also examined. As a result, the stable flame zones expressed by limits curves of flame lifting and yellow tipping show the similar results in a domestic gas range and IT burner. Furthermore, IT burner can reproduce the flash back phenomena and show the distinct difference of fuel type as the burner diameter is increased. To suggest the new type of flame stability diagram in the respect of fuel interchangeability, the air flowrate and Wobbe fuel flowrate were adopted as axis coordinates. It can be identified that the new diagram can provide the useful information on the difference of flame stability zone, heat input rate and air-fuel ratio when a fuel is altered to other fuels under the identical operating conditions. Finally, the stable flame zones for natural gas of 6 type are compared, and the detailed information to use as the interchangeability fuels of standard natural gas is provided using the new type of flame stability diagram.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.912-914
• /
• 2002

Single phase SRM(Switched Reluctance Motor) can not be started by itself and torque ripple is more generated than multi-phase SRM. But it is excited by single phase current and has very simple structure. Therefore it can be used in domestic appliance. Torque and speed of single phase SRM is controlled by adjusting exciting current and exciting section. Driver, which is composed with absolute encoder and DSP, is fabricated for control of exciting section on this paper. Then driving characteristics with exciting section is confirmed by using salient pole rotor type single phase SRM, which is fabricated in preceding research.

• Journal of Welding and Joining
• /
• 제9권1호
• /
• pp.48-57
• /
• 1991

Welding of dissimilar materials is an area of growing importance in the automotive, aerospace, electronics medical and other domestic appliance industries. This study investigated the ultrasonic welding of dissimilar polymers. Two amorphous and two semicrystalline polymers were used, utilizing all possible welding combinations. For each combination of dissimilar materials, the weldabilitys of the joint was evaluated as a function of weld time, amplitude of vibration and pressure. The joint was also examined microscopically to analyze the melting and flow of the materials. It was generally around found that welding of amorphus polymers resulted in very poor joints. Welding of the amorphous polymers together and welding of the semicrystalline polymers together produced good joints.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.118-125
• /
• 1992

Joining of thermoplastics is an area of growing importance in the automotive, aerospace, electronics medical and other domestic appliance industries. While adhesive Bonding or mechanical fastening could be used to join thermoplastics, welding is very effective because of its speed and low cost. This study investgated the ultrasonic joining of thermoplastics. Four kinds of thermoplastics such as Acrylonitrile Butadiene Styrene, Polystyrene, Polyethylene and Polypropylene were used, ultilizing all possible joining combinations. In each combination of thermoplastics, the weldability of the joint was evaluated as a function of weld time, amplitude of vibration and pressure. It was generally found that joining of amorphous thermoplastics with semicrystalline thermopastics resulted in poor joints due to its different crystalline structure. Joining of the amorphous thermoplastics together and joining of the semicrystalline thermoplastics together produced the best joints owing to its same crystalline structure.

• 연구논문집
• /
• 통권27호
• /
• pp.109-118
• /
• 1997

Kerosene Burner has widely used in domestic heating appliance. Higher combustion efficiency is required to save fuel and clean exhaust gas. The combustion characteristics in kerosene burner highly depends on the performance of evaporating liquid kerosene. And performance of evaporating effect on generation of tar. In this study, flow and heat transfer of kerosene burner is simulated by FLUENT/UNS using unstructured mesh system and discrete phase model to analyze performance of evaporating kerosene liquid. The simulated results show very complicated flow pattern and back flow at the exit of burner.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 2부
• /
• pp.478-483
• /
• 2007

본 연구는 가전제품 사용자 인터페이스에서 음성 신호와 청각 신호의 최적 할당 방법을 기술하였다. 가정에서 수시로 접하는 가전제품에서 음성 유저 인터페이스(Voice User Interface, 이하 VUI) 는 음성을 매개로 일어나는 인간과 기계 간 인터페이스를 뜻한다. 음성 유저 인터페이스의 단독적 적용보다는 소리 신호와 함께 사용하여 사용자들의 인터페이스를 향상시킬 수 있다. 본 연구에서는 주부 사용자들을 대상으로 F.G.I, 실험, Depth Interview 를 수행하여 가전제품의 음성 생성 및 표현 인터페이스에서 음성과 소리 신호의 배치에 대한 사용자들의 니즈 조사 및 실험 결과를 기반으로 최적의 할당 방법을 제시하였다.