• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.233-236
• /
• 2001

일반적으로 스피커를 동작시키게 되면, 스피커 보이스 코일에 열이 발생하게 되고, 열에 의한 보이스코일의 저항의 증가가 나타나게 되는데, 기존의 연구는 저음용 스피커(Woofer) 만을 대상으로 스피커의 음향특성 변화들에 관해 수행되었다. 그러나, 현대의 스피커는 A/V시스템분야의 발전에 따라 고음재생의 충실도가 강조되고 있는 경향이므로, 고음용 스피커(Tweeter)에 대한 열 발생의 영향을 조사하였다. 본 연구에서는 고음용 스피커의 입력전력에 따른 특성 변화를 조사하고, 입력전력의 증가로 인한 보이스코일(voice coil)의 저항 증가에 따른 고음용 스피커의 특성변화에 관해 실험하였다. 그리고, 스피커의 진동에 의한 펌프(pump) 역할을 이용하는 냉각용 구멍을 뚫어 스피커의 특성변화를 검토하였다. 실험대상으로는 직경 25mm의 돔(Dome)형 진동판을 가진 고음용 스피커와 이 스피커의 후면 중심부에 구멍을 뚫어 열 방출구가 형성된 3종의 시료를 대상으로 특성변화를 비교$\cdot$측정하였다. 여기에서, 사용된 시료는 국내 Y사의 판매용 고음용 스피커로 제품의 원 상태인, 구멍이 없는 것을 기준시료로 하고, 이와 동일한 제품들의 후면에 각각 직경 5mm, 10mm, 15mm의 구멍을 가공하여 비교시료로 하였다. 기준 및 비교시료의 스피커 특성을, 한국산업규격 KS C 6027의 측정법에 따라, 입력 1W 상태에서 기준시료의 사양을 측정하였고[1], 입력을 0.5W, 1W, 2W, 4W, 8W, 16W로 가하여, 시료별 입력증가에 따른 스피커의 주파수 응답특성, 임피던스(Impedance), 조화 왜(Harmonic Distortion)의 변화율 측정을 통해 스피커의 특성변화 정도를 검토하였다. 향후, 본 연구의 결과는 고음용 스피커의 특성 열화에 대한 예측 및 개선 방안을 제시하는 기본 자료로 활용이 가능할 것으로 사료된다.용하여 현금흐름예측을 할 수 있는 Model을 제시하였다. 특히 건설공사의 현금흐름 예측의 중요한 요소인 Cash-Out에 대하여, 공사비 구성요소인 자재, 노무, 중기, 외주, 경비등 각 Resource의 보할(Weights)을 실 공사원가에 따른 보할의 변화와 Resource들의 Time Lag를 적용 기존 연구자의 Model과 다른 Model을 제시하였다. 또한 기존 연구자들의 Model과 비교하여 편리성, 정확도 및 신뢰성이 높은 Model임도 증명하였다.세대까지도 발현수준이 유지될 것으로 판단된다. 이러한 연구결과는 계통으로 확립된 형질전환 동물에 부여된 새로운 유전형질은 지속적으로 후대로 유전될 수 있음을 제시한다.잖⨀瘀Ā퀇Āゑ잖⨀Ā퀇Ԁ￿™잖⨀䌀Ā퀇ĀꄏĀꀏꄏĀꀏ₱?⨀Ā Ԁ￿䂱?⨀ऀĀ耀Ā삱?⨀؀Ā Ā?⨀ጀĀ耀Ā?돀ꢘ?⨀硩?⨀ႎ?⨀?⨀넆돐쁖잖⨀쁖잖⨀／ࠐ?⨀焆덐瀆倆Āⶇ퍟ⶇ퍟ĀĀĀĀ磀鲕좗?⨀肤?⨀⁅Ⴅ?⨀쀃잖⨀䣙熸ጁ↏?⨀

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.472-483
• /
• 2013

Actual maritime exercise for improving the capability of submarine sonar operator leads to a lot of cost and constraints. Sonar simulator maximizes the capability of sonar operator and training effect by solving these problems and simulating a realistic battlefield environment. In this study, a passive sonar simulator algorithm is suggested, where the simulator is divided into three modules: maneuvering module, noise source module, and sound propagation module. Maneuvering module is implemented in three-dimensional coordinate system and time interval is set as the rate of vessel changing course. Noise source module consists of target noise, ocean ambient noise, and self noise. Target noise is divided into modulated/unmodulated and narrowband/broadband signals as their frequency characteristics, and they are applied to ship radiated noise level depending on the vessel tonnage and velocity. Ocean ambient noise is simulated depending on the wind noise considering the waveguide effect and other ambient noise. Self noise is also simulated for flow noise and insertion loss of sonar-dome. The sound propagation module is based on ray propagation, where summation of amplitude, phase, and time delay for each eigen-ray is multiplied by target noise in the frequency domain. Finally, simulated results based on various scenarios are in good agreement with generated noise in the real ocean.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.3-4
• /
• 1999

최근 산업이 고속도화, 고능률화 및 고정멸화의 추세로 발전함에 따라 우수한 내마모성, 인성, 고온 안정성 및 내구성을 갖는 공구 및 금형을 요구하게 되었다. 그러나 이와같은 성질들은 어떤 단일 재료에서는 얻을 수 없으며 적당한 기판공구나 금혈위에 내마모성 보호피막을 coating함으로 비교적 저렴하게 얻을 수 있다. 화학증착법으로 TiC, TiN등을 증착시킬때에는 $1000^{\circ}C$정도의 반응온도가 필요하며 이러한 증착온도는 모재가 초경합금일때는 문제가 안되나 강재일 경우 모재의 연화와 칫수변화의 문제를 야기시킨다. 최근에는 플라즈마를 사용하여 증착반응온도를 $550^{\circ}C$ 이하로 낮추는 플라즈마 화학 증착볍(PACVD)이 대두되고 있다. 그러나 이 방법어서 는 뚱착하려는 금속원소가 TiCl4의 형태로 공급되고 있으므로 생성된 층이 염소를 포함하고 있다. 이 층에 잔존하는 염소는 층의 기계적 성질을 저하시키고 층내의 stress를 유발시킨다. 또한 HCI개스의 생성으로 인하여 펌프 및 장비의 부식이 촉진 된다 이러한 결점을 극복하기 위하여 금속유기화합물 전구체(metallo-organic precursor)로 $TiCl_4$를 대체하고자 하는 연구가 활발하게 진행되고 있으며 본 연구실에서 이에 대하여 연구한 결과를 소개하고자 한다. diethylamino titanium을 전구체로 사용하여 $H_2,\;N_2,\;Ar$분위기하에서 pulsed d.c.를 사용하는 MO-PACVD에 의하여 $150~250^{\circ}C$의 저온에서 Al 2024 기판에 TiCN층 형 성을 하였다. 전구체 증발온도는 $74~78^{\circ}C$의 온도범위어야 하며 고경도의 코탱층은 54% duty, 14.2kHz, 450V의 조건에서 얻어졌으며 duty, 주파수, 전압이 증가함에 따라 경도는 저하되었다. 이때의 표면 morphology를 SEM으로 조사한바 dome structure가 크게 발달되었음을 알 수 있었다. 본 실험의 온도 범위내에서 얻은 TiCN 증착반응의 활성화에너지는 7.5Kcal/mol이었다. 증착된 TiCN층은 우수한 내마모섣을 나타내었으며 스크래치테스트 결과 17N의 엄계하중을 나타내었다. 본 연구에서 변화 시킨 duty, 주파수, 전압의 범위에서는 층의 밀착력은 크게 변화하지 않았다. titanium isopropoxide를 전구체로 사용하여 Hz, Nz 분위기하에서 d.c.를 사용하는 MO-PACVD에 의하여 Ti(NCO) 코팅층을 SKDll, SKD61, SKH9 공구강에 형성시키는 공정을 개발하였다. 최적의 Ti(NCO) 코탱층을 얻기 위해 유입전구체 부피%의 양은 향착압력의 5%를 넘지 않아야 되고 수소와 젤소 가스비가 1:1일 때 가장 높은 코팅층의 경도값을 나타내었다. 수소와 질소 가스비가 3:7일 때 TiFeCr(NCO)의 복화합물 코팅층이 형성됨을 알 수 있었고 500t의 증착온도에서 얻은 Ti(NCO) 코팅층이 높은 경도값과 좋은 내식성을 나타내었다. 또한 이와같은 Ti(NCO) 코팅공정과 본 실험실에서 개발한 확산층만 형성시키는 plsma nitriding 공정을 결합하여 복합코탱층을 형성하였는데 이 복합코팅층은 고경도와 우수한 내마모성, 내식성 뿐만 아니라 10)N 이상의 뛰어난 밀착력을 나타내었다. 현재 많이 사용되고 있는 PVD법은 step coverage가 좋지 않은 점과 cost intensive p process라는 단점이 있다. MO-PACVD법은 이러한 문제를 해결할 수 있는 방법으로서 앞으로 지속적인 도전이 요구되는 분야이다.

• Korean Journal of Veterinary Research
• /
• v.36 no.3
• /
• pp.551-563
• /
• 1996

This study investigated the properties of primary cultured proximal tubule cells in hormonally defined(insulin, transferrin, and hydrocortisone), serum-free medium or 10% serum-supplemented medium. The growth rate of the primary cultured proximal tubule cells was lower in the hormonally defined, serum-free medium than in the 10% serum- supplemented medium(p < 0.05), while the activities of brush border marker enzymes, alkaline phosphatase(AP), leucine aminopeptidase(LAP), and y-glutamyl transpeptidase(${\gamma}$-GTP) were increased(p < 0.05). The activities of these enzymes, however, decreased with the lapse of incubation time to 50-70% after 6 days culture compared to those of the freshly-prepared proximal tubules. The enzymatic activities of the primary cultured proximal tubul cells on 6, 9, 12, and 15 days of culture were significantly increased in the hormonally defined, serum-free medium compared to the 10% serum-supplemented medium(p < 0.05). The functional differentiation of the primary culture was examined by observing multicellular domes of the confluent monolayer, which is indicative of transepithelial solute transport. The dome formation by the proximal tubule cultures occurred at a higher frequency in the hormonally defined, serum-free medium than in the 10% serum-supplemented medium(p < 0.05). Upon electron microscopic examination, an increased density of the brush border was observed in the hormonally defined, serum-free medium compared to the cells grown in 10% serum-supplemented medium. The activities of $Na^+$glucose cotransporter($^{14}C$-a-MG uptake), $Na^+$phosphate cotransportere($^{32}P$ uptake) and $Na^+$ transporter($^{22}Na^+$ uptake) in the brush border membrane, and of $Na^+/K^+$-ATPase($^{86}Rb$ uptake) in the basolateral membrane were significantly stimulated in the hormonally defined, serum-free medium than in 10% serum-supplemented medium(p < 0.05). In conclusion, the primary cultured proximal tubule cells grown in the hormonally defined, serum-free medium demonstrated a slower growth rate, but the functions of cell were enhanced.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.155-162
• /
• 2011

This study was conducted to suggest the measurement procedure and to build up national greenhouse gas inventory database of animal agricultural sector by assessing methane and nitrous oxide emissions according to IPCC guidelines for national greenhouse gas inventory report in order to correspond to the Climate Change Convention. Ten house-made steady-state Half dome floating chambers were used to collect air samples emitted from slurry stored in the pit under the slat. Those chambers were spread out in order that air samples might represent the whole area of slurry under the slat. Fresh air was pumped into the chambers by $5{\sim}9{\ell}/min$ and air inside the chambers was sampled by $1{\ell}/min$. Surplus air by the higher flow rate of fresh air than sampling flow rate was passed through a hole on the top of chambers. Nitrous oxide fluxes measured from 10 locations would be negligible as concentrations between background air and sampled air from the chambers were within the error range. However, mean $CH_4$ fluxes were $0.15{\sim}1.02mg/m^2{\cdot}s$. The application of continuous greenhouse gas measurement techniques would be preferred if the patterns of greenhouse gas emissions are considered.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.1
• /
• pp.1-15
• /
• 2003

The Paekrogdam summit crater area, Mt. Halla, Jeju Island, Korea, composed of Paekrogdam trachyte, Paekrogdam trachybasalt, and Manseidongsan conglomerate in ascending order. Joint systems show concentric and radial patterns around the summit crate wall. The Paekrogdam crater is a summit crater lake which erupted the tuffs, scorias and lava flows of Paekrogdam trachybasalt after the emplaceent of Paekrogdam trachyte dome. SiO$_2$ contents of mafic and felsic lavas are respectively, 48.0∼53.7 wt.％ and 60.7∼67.4 wt.%, reflecting bimodal volcanism. And lavas with SiO$_2$ between 53.7 wt.% and 60.7 wt.％ are not found. According to TAS diagram and K$_2$O-Na$_2$O diagram, the volcanic rocks belong to the normal alkaline rock series of alkali basalt-trachybasalt-basaltic trachyandesite and trachyte association. Oxide vs. MgO diagrams represent that the mafic lavas fractionated with crystallization of olivine, clinopyroxene, magnetite and ilmenite and felsic trachyte of plagioclase and apatite. The characteristics of trace elements and REEs shows that primary magma for the trachybasalt magma would have been derived from partial melting of garnet peridotite mantle. In the discrimination diagrams, the volcanic rocks are plotted at the region of within plate basalt (WPB).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.619-628
• /
• 2009

LiDAR has capability of rapid data acquisition and provides useful information for reconstructing surface of the Earth. However, Extracting information from LiDAR data is not easy task because LiDAR data consist of irregularly distributed point clouds of 3D coordinates and lack of semantic and visual information. This thesis proposed methods for automatic extraction of buildings and 3D detail modeling using airborne LiDAR data. As for preprocessing, noise and unnecessary data were removed by iterative surface fitting and then classification of ground and non-ground data was performed by analyzing histogram. Footprints of the buildings were extracted by tracing points on the building boundaries. The refined footprints were obtained by regularization based on the building hypothesis. The accuracy of building footprints were evaluated by comparing with 1:1,000 digital vector maps. The horizontal RMSE was 0.56m for test areas. Finally, a method of 3D modeling of roof superstructure was developed. Statistical and geometric information of the LiDAR data on building roof were analyzed to segment data and to determine roof shape. The superstructures on the roof were modeled by 3D analytical functions that were derived by least square method. The accuracy of the 3D modeling was estimated using simulation data. The RMSEs were 0.91m, 1.43m, 1.85m and 1.97m for flat, sloped, arch and dome shapes, respectively. The methods developed in study show that the automation of 3D building modeling process was effectively performed.

• Korean Journal of Veterinary Research
• /
• v.37 no.1
• /
• pp.87-101
• /
• 1997

The development of trachea in fetuses on 60, 90 and 120 days of gestation and neonates of Korean native goats was investigated by microscopy and scanning and transmission electron microscopy. The results were summarized as follows; Light microscopic studies: 1. In the 60-day-old fetuses, the tracheal walls were differentiated and divided into four layers of the mucosa, submucosa, muscle and cartilage, and adventitia. The tracheal epithelium is composed of stratified ciliated columnar epithelium at 60- and 90-day-old fetuses while the epithelium observed at 120-day-old fetuses was pseudostraified ciliated colummar epithelium. 2. In the 90-day-old fetuses, tracheal glands extended into the submucosa and peripheral area of the tracheal cartilage. The blood vessels were observed in the submucosa and adventitia. The elastic and collagenous fibers were observed in the tracheal walls. 3. In the neonates, the tracheal walls consisted of mucosa with well-developed folds, submucosa, tracheal glands, muscle and cartilage, collagenous and elastic fibers, and adventitia, which were more developed than those of 120-day-old fetuses. The tracheal epithelium was developed as that in adults. Scanning electron microscopic studies: 4. In the 60-day-old fetuses, most of tracheal epithelial cells were nonciliated but short microvilli were sporadically observed on the luminal surface. On rare occasions, a few cells have solitary cilium. 5. In the 90-day-old fetuses, the ciliated cells appeared increasingly and cilia elongated longer than those of 60-day-old fetuses. 6. In the 120-day-old fetuses, the nonciliated cells covered with microvilli in dome-shape were barriered by thick carpet of cilia. The nonciliated cells also have many papillary projectons on the apical surface. 7. In the neonates, the nonciliated cells in tracheal epithelium were covered compactly with numerous cilia, and many secretory droplets were found on the cilia. Transmission electron microscopic studies: 8. In the 60-day-old fetuses, nonciliated cells of the tracheal epithelium contain large amounts of glycogen granules in the supernuclear and subnuclear areas meanwhile a few cell organelles were formed. Cilia were well formed along the apical cell membranes of the ciliated cells. Also found in the ciliated cells were basal corpuscles, mitochondria and short chains in granular endoplasmic reticulum(GER). Between the epithelial cells presented were well-defined junctional complex with zonula occludens and desmosomes. The nuclei were variable in size and shape. The more developed nucleoli were observed conspicuosly. 9. In the 90-day-old fetuses, nonciliated cells contained large glycogen granules. Accumulated glycogen granules were observed in the subnuclear and supranuclear portion of the cytoplasm. A few short microvilli were covered with glycocalyx. Ciliated cells contained numerous mitochondria and short chains of GER. 10. In the 120-day-old fetuses, the ciliated cells contained numerous mitochondria, abundant short chains of GER and nucleoli. Nonciliated cells contained some Golgi complex and mitochondria. The cell borders were well-defined and distinct junctional complex with zonula occludens, desmosomes, and interdigitorum. 11. In the neonates, well-developed goblet cells were observed in the tracheal epithelium. Ultrastructures of ciliated and nonciliated cells on the tracheal epithelia were similar in pattern as those in adults.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.962-969
• /
• 1999

Elastic and elasto-plastic stress analyses of AlN/Cu and AlN/W pints produced by active-metal brazing method using Ag-Cu-Ti insert-metal were performed with use of Finite-Element-Method(FEM). The results of stress analyses were compared with those from the pint strength tests and the observations of fracture behaviors. It was shown that a remarkably larger maximum principal stress is built in the AlN/Cu pint compared to the A1N/ W joint. Especially, the stress concentration with tensile component was confirmed at the free surface close to the bonded interface of AlN/Cu. The elasto-plastic analysis under consideration of stress relaxation effect of Ag-Cu-Ti insert possessing a so-called 'soft-metal effect' showed that the insert leads to a lowering of maximum principal stress in AlNiCu pint, even though an increase of the insert thickness above 100$\mu\textrm{m}$ could not bring its further decrease. The maximum pint strengths measured by shear test were 52 and 108 MPa for AlNiCu and AlN/W pints. respectively. Typical fractures of AlN/Cu pints occurred in a form of 'dome' which initiated from the free surface of AlN close to the bonded interface and proceeded towards the AlN inside forming a large angle. AlN/W pints were usually fractured at AlN side along the interface of AlN/insert-metal.

• Korean journal of applied entomology
• /
• v.39 no.1
• /
• pp.21-24
• /
• 2000

These studies were conducted to investigate the effect of temperature on the developmentof Delia platura (Meigen) under a laboratory condition at five different temperatures. The developmentalperiods of D. platurcr from egg to adult emcrgence at the temperatures of 11, 15, 19, 23, and 27$^{\circ}$C were67.8k 14.5, 43.7t-9.4, 31.2-t-7.0, 22.4k4.9, and 18.3k4.1 days, respectively. Based on these results,threshold temperature of development and effective cumulative degree-day (DD) for overall developmentwas 0.6"C and 579.8 DD, respectively. Generation of time D. pluturci averaged 30.8 days, and meannumber of eggs produced per female was 246.5 k 16.9 at 23$^{\circ}$C. Hatching rate and emergence rate curvesin relation to the temperature was dome shaped with the peak of 90.0 and 85.2% at 23"C, it wassuggesting that hatching and emergence were inhibited by high temperature above that temperature.Pupation rate of the insect reared on garlic and on onion were higher than those reared on other diets.Oviposition of D. platum usually began 7-9 days after emergence at 23$^{\circ}$C. Females laid about 3-4 eggsin a day. Oviposition of the females peaked at the age of 12- 18 days after emergence. of 12- 18 days after emergence.