• 제목/요약/키워드: division by zero

검색결과 340건 처리시간 0.03초

수용액 중 영가 철(Zero-Valent Iron)의 특성에 따른 Cr(VI)의 환원 효율 비교 (Reduction Efficiency of Cr(VI) in Aqueous Solution by Different Sources of Zero-Valent Irons)

  • 양재의;김종성;옥용식;유경열
    • 한국환경농학회지
    • /
    • 제24권3호
    • /
    • pp.203-209
    • /
    • 2005
  • 실험에 사용된 영가 철의 평균 입도는 $85.55{\sim}196.46{\mu}m$의 범위를 나타내었고 비표면적은 $0.055{\sim}0.091m^2/g$으로 나타났다. 영가 철 중 J(93%) 및 PU(88%)를 제외한 PA, F, S, J1는 철을 98% 이상 함유하는 것으로 평가되었다. 영가 철에 의한 Cr(VI)의 환원은 영가 철의 종류에 따라 달랐으며, J 및 PU의 경우 3시간 이내에 98% 이상의 Cr(VI)을 제거하였다. 그러나 PA, F, S, J1의 경우 반응 48시간 동안 각각 74, 65, 29, 11%의 Cr(VI) 만을 제거하였으며 이때 환원 효율은 J > PU > PA > F > S > J1 순으로 나타났다. 영가철에 의한Cr(VI)의 환원 과정에서 용액의 pH는 반응초기 3시간 동안 급격히 증가하였으며 이후 안정화되는 경향을 나타내었다. 영가 철의 종류에 따른 pH의 변화는 PU > J > PA > F > S > J1 순으로 나타났으며 Cr(VI)의 환원효율이 큰 영가 철에서 pH의 상승 폭도 크게 나타나는 것으로 평가되었다. 영가 철의 종류에 따른 산화환원전위 Eh의 변화는 pH와는 반대의 경향을 나타내었으며 Cr(VI)의 환원율이 클수록 Eh의 감소율은 증가하였다. 유기화합물의 경우 반응효율이 영가 철의 물리적 특성에 의해 주로 지배되는 것으로 알려져 있으나 Cr(VI)의 경우 화학적 특성이 반응효율을 지배하는 것으로 판단되었다. 본 실험에 사용된 6종류의 상용 영가 철 중에는 J와 PU가 Cr(VI)의 환원에 가장 효과적인 것으로 조사되었다.

2차원 기공층을 포함하는 초박형 단열기판의 미세구조 및 단열 특성 (Microstructure and Thermal Insulation Properties of Ultra-Thin Thermal Insulating Substrate Containing 2-D Porous Layer)

  • 유창민;이창현;신효순;여동훈;김성훈
    • 한국전기전자재료학회논문지
    • /
    • 제30권11호
    • /
    • pp.683-687
    • /
    • 2017
  • We investigated the structure of an ultra-thin insulating board with low thermal conductivity along z-axis, which was based on the idea of void layers created during the glass infiltration process for the zero-shrinkage low-temperature co-fired ceramic (LTCC) technology. An alumina and four glass powders were chosen and prepared as green sheets by the tape casting method. After comparison of the four glass powders, bismuth glass was selected for the experiment. Since there is no notable reactivity between alumina and bismuth glass, alumina was selected as the supporting additive in glass layers. With 2.5 vol% of alumina powder, glass green sheets were prepared and stacked alternately with alumina green sheet to form the 'alumina/glass (including alumina additive)/alumina' structure. The stacked green sheets were sintered into an insulating substrate. Scanning electron microscopy revealed that the additive alumina formed supporting bridges in void layers. The depth and number of the stacking layers were varied to examine the insulating property. The lowest thermal conductivity obtained was 0.23 W/mK with a $500-{\mu}m-thick$ substrate.

High Power Factor Three Phase Rectifier for High Power Density AC/DC Conversion Applications

  • Cho, J.G.;Jeong, C.Y.;Baek, J.W.;Song, D.I.;Yoo, D.W.
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.648-653
    • /
    • 1998
  • The conventional three-phase rectifier with bulky LC output filter has been widely used in the industry because of its distinctive advantages over the active power factor correction rectifier such as simple circuit, high reliability, and low cost. Over than 0.9 power factor can be achieved, which is acceptable in most of industry applications. This rectifier, however, is not easy to use for high power density applications since the LC filter is bulky and heavy. To solve this problem, a new simple rectifier is presented in this paper. By eliminating the bulky LC filter from the conventional diode rectifier without losing most of the advantages of the conventional rectifier, very high power density power conversion with high power factor can be achieved. Operation principle and design considerations are illustrated and verified by Pspice simulation and experimental results from a prototype of 3.3 kW rectifier followed by 100KHz zero voltage switching full bridge PWM converter

  • PDF

0가 철과 직류전원을 이용한 TCE 오염 지하수의 정화기법 예비조사 (Preliminary Experiments for the Remediation of Trichloroethene-Contaminated Groundwater Using Direct-Current and Zero-Valent Iron)

  • 문지원;문희수;노열;이석영;송윤구
    • 자원환경지질
    • /
    • 제34권3호
    • /
    • pp.307-313
    • /
    • 2001
  • $Fe^0$ 등의 0가 금속을 포함하는 반응재들은 오염운이 반응벽을 통과하는 동안 염소계 용매들을 분해시킨다. Fe$^{0}$ 를 이용한 투수성 반응벽은 특히 trichloroethene(TCE)이 주된 오염원인 경우 처리비용이 적다는 장점이 있는 반면, 반응속도가 느리고, 반응벽의 운영기간이 제한된다는 단점이 있다. 본 연구는 기존의 Fe$^{0}$ 를 이용한 반응벽에 직류전원을 걸어주는 향상된 처리기술 개발은 예비연구이다. $Fe^0$ 반응컬럼을 이용한 bench-scale의 실험을 통해 $Fe^0$ 반응재와 직류전원의 조합은 TCE의 탈염소화를 촉진하는 것으로 나타났다. 탈염소화의 반응기작은 철의 산화와 부가적인 전자의 공급원인 외부전원에 의한 환원에 기인한다.

  • PDF

Frame synchronization Confirmation Technique Using Pilot Pattern

  • Song, Young-Joon
    • Journal of Communications and Networks
    • /
    • 제2권1호
    • /
    • pp.69-75
    • /
    • 2000
  • A new frame synchronization confirmation technique using a pilot pattern of both uplink and downlink channels is proposed for W-CDMA (Wideband Code Division Multiple Access) system. It is shown that by using this technique, we can cancel the side lobe for autocorrelation functions of the frame synchronization words of pilot pattern have the maximum to-of-phase autocorrelation value "4" with two peak values equal in magnitude and opposite in polarity at zero and middle shifts. Due to this side lobe cancellation effect, therefore, the autocorrelation function of the frame synchronization words becomes ideal for the frame synchronization confirmation since double maximum correlation values equal in magnitude and opposite polarity at zero ad middle shifts can be achieved. This property can be used to double check frame synchronization timing and thus. improve the frame synchronization confirmation performance.

  • PDF

CDMA 시스템을 위한 정수론 접근 방법에 의한 주기이진부호의 사건?? 계산 (Periodic Binary Sequence Time Offset Calculation Based on Number Theoretic Approach for CDMA System)

  • 한영열
    • 한국통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.952-958
    • /
    • 1994
  • 본 논문에서 정수론에 기초한 이진수호와 이전된 이진부호 사이의 시간옵셉을 계산하는 방법을 제시한다. 이 방법을 이용하여 이진부호 사이의 시간옵셉을 계산할 수 있다. 모든 기지국은 동일한 확산부호를 사용하므로써 동기 부호분할 다원접속 시스템에서 기준(영 \ulcorner\ulcornerV)부호를 정의하는 것은 중요하다. 다른 기지국으로부터 이동국에 수신되는 신호를 구별하기 위하여 영옵셉부호에 대한 시간옵셉을 사용하고 있다. 본 논문은 기준부호를 정의하는 방법을 제시한다.

  • PDF

Predictive and Preventive Maintenance using Distributed Control on LonWorks/IP Network

  • Song, Ki-Won
    • International Journal of Safety
    • /
    • 제5권2호
    • /
    • pp.6-11
    • /
    • 2006
  • The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

Genotype-by-Environment Interaction in Yield of Sesame

  • Shim, Kang-Bo;Kang, Churl-Whan;Kim, Dong-Hee;Park, Jang-Whan
    • 한국작물학회지
    • /
    • 제48권2호
    • /
    • pp.65-67
    • /
    • 2003
  • This study was conducted to analyze the effects of genotypes, environments and interaction of G$\times$E on yields of sesame grown in seven different environments by AMMI analysis. Environments accounted for the largest (91 %) proportion of the sums of squares, followed by G$\times$E (8%) and genotypes (1%) Therefore, G$\times$E effects are theoretically eight times as important as G effects. G2 (Yanghukkae) has the largest IPCAI scores indicating higher G$\times$E interaction. G3 (Suwon 171) was near zero score of IPCAI suggesting higher stability than others in yield component. Most of environments except for Iksan area shows different G$\times$E effects by years, which means Iksan is optimal area for multi-environmental adaptation evaluation in sesame breeding programs. According to this experiment, it is concluded that maximization of grain yield through environments can be achieved by specific genotypes in specific environments.

수용액 중 영가 철의 비소흡착 및 반응기작 구명 (Mechanism and Adsorption Capacity of Arsenic in Water by Zero-Valent Iron)

  • 유경열;옥용식;양재의
    • 한국토양비료학회지
    • /
    • 제39권3호
    • /
    • pp.157-162
    • /
    • 2006
  • 본 연구는 비소로 오염된 물을 영가 철을 이용하여 복원하는 과정에서 영가 철의 비소 제거에 영향을 미치는 환경인자 간의 특성을 파악하고 기기분석을 통해 영가 철에 의한 비소의 흡착 반응기작을 구명하고자 수행되었다. 영가 철에 의한 As(V)의 흡착은 Langmuir 등온흡착 모델에 부합하였으며 As(V)의 흡착량은 반응 수용액의 pH가 낮을수록(pH 3: 2.05, pH 5: 1.82, pH 7: 1.24, pH 9: 1.03 mg As/g $Fe^0$), 그리고 온도가 증가할수록($15^{\circ}C$ : 1.59, $25^{\circ}C$ : 1.81, $35^{\circ}C$ : 1.93 mg As/g $Fe^0$) 증가하였다. 반응기작을 규명하기 위하여 SEM-EDS 분석을 수행한 결과, 반응 전의 영가철 표면은 부드럽고 큰 결정 형태를 나타내었으나 반응 후에는 매우 거칠고 작은 입자 형태를 나타내었다. 반응 후 영가 철의 조성물 분석결과, 영가 철 표면에 비소가 흡착됨을 알 수 있었다. 반응 전 후 영가 철의 결정구조 XRD를 이용하여 조사한 결과, $Fe^0$는 반응 후 $Fe_2O_3$ 및 FeOOH로 변화되었으며 As는 $FeAsO_4{\cdot}2H_2O$의 형태로 불용화 됨을 알 수 있었다. 이상의 결과에서 비소오염에 불용화 적용방법으로 영가 철을 사용 시 pH 및 온도 조건 등을 고려하여 현장에 적용해야 될 것으로 판단된다.

EXTREMALLY RICH GRAPH $C^*$-ALGEBRAS

  • Jeong, J.A
    • 대한수학회논문집
    • /
    • 제15권3호
    • /
    • pp.521-531
    • /
    • 2000
  • Graph C*-algebras C*(E) are the universal C*-algebras generated by partial isometries satisfying the Cuntz-Krieger relations determined by directed graphs E, and it is known that a simple graph C*-algebra is extremally rich in sense that it contains enough extreme consider a sufficient condition on a graph for which the associated graph algebra(possibly nonsimple) is extremally rich. We also present examples of nonextremally rich prime graph C*-algebras with finitely many ideals and with real rank zero.

  • PDF