• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.91-97
• /
• 2004

Cryptand ion exchange resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 5% and 10% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium ($UO{_2}^{2+}$) ion were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium ($UO{_2}^{2+}$), magnesium ($Mg^{2+}$), neodymium ($Nd^{3+}$) ion. The adsorption was in order of 1%, 2%, 5%, and 10% crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2022

The initial co-transport and counter-transport permeate transport characteristics of calcium ion at epithelial cell membrane model in parathyroid which irradiated by high energy x-ray(linac 6 MV) was investigated. The epithelial cell membrane model used in this experiment was a polysulfonated copolymerized membrane of poly(PS-DVB: polystyrene-divinylbenzene). The difference of sorbed water in membrane, fixed carrier concentration(SO₃^2-), initial pH value, OH^- concentration were occurred at difference of Ca²⁺concentration and quantity of parathyroid hormone, respectively. The initial co-transport and counter-transport permeate flux of Cl^-, OH^-, Ca²⁺ on fixed carrier concentration(SO₃^2-) and initial pH value of irradiated membrane was found to be decreased than non-irradiated membrane. The initial co-transport and counter-transport permeate flux of Ca²⁺ on fixed carrier concentration (SO₃^2-), initial pH value, OH^- concentration in irradiated membrane were found to be decreased about 2.68 ~ 6.87 times, about 1.42 ~ 1.63 times, about 2.07 ~ 1.672 times than non-irradiated membrane, respectively. As a result, the quantity of parathyroid hormone was decreased at irradiated membrane than non-irradiated membrane. The decrease of parathyroid hormone was occurred at hypoparathyroidism and osteoporosis, parathyroiditis, and so on. As the parathyroid hormone in epithelial cell membrane model were abnormal, cell damages were appeared at cell.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.507-512
• /
• 2000

The headspace flavors of roasted tea, prepared with steamed and nonsteamed polygonatum roots, were absorbed in solid-phase microextraction(SPME) fiber coated with $65\;{\mu}m$ of carbowax/divinylbenzene(CW/DVB) and analysed by GC-MS. The absorption conditions of SPME fiber for equilibrated headspace were selected as $60^{\circ}C$ and 30 min. In a comparison for both samples roasted at $130^{\circ}C$ for 15 min, gas chromatograms showed a similar pattern in overall profiles between steamed and nonsteamed samples before roasting, but some differences were observed in peak characteristics. From 40 separated peaks, 25 compounds were identified with both GC-MS and retention time comparison. The pyrazines including 2,3-dihydro-3,5-dihydroxy-6-methyl-4H-pyran-4-one, 2,5-dimethyl-4-hydroxy-3(2H)-furanone, 2-acetyl-1-pyrroline, etc. were higher in their contents in nonsteamed-roasted sample than steamed-roasted one. In particular, steamed-roasted polygonatum showed higher contents of acetic acid(8.17%) and hexanoic acid(5.43%) than the corresponding compounds of nonsteamed-roasted one, 2.40% and 2.00%.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.358-370
• /
• 1988

Several new ion exchange resins have been synthesized from chloromethyl styrene-1,4-divinylbenzene(DVB) with 1%, 2%, 4%, and 10%-crosslinking and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium, rare earths and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and have good resistance to heat at $280^{\circ}C$. The $UO_2^{+2}$ aqueous solution are not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was twenty minutes and adsorptive power decreased in proportion to crosslinking size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations is in the order of $UO_2^{2+},\;Cu^{2+}\;and\;Nd^{3+}$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.695-701
• /
• 2005

Efficient method was established for analysis of sulfur-containing compounds, including dimethyl disulfide, dimethyl trisulfide, 3-methyl thiophene, allyl mercaptan, 2-methyl-3-furanthiol, and methional. Sulfur-containing compounds were extracted through solid phase microextraction (SPME) or static headspace extraction (SH), and quantified using gas chromatograph equipped with pulsed flame photometric detector. All sulfur compounds, except ally mercaptan, showed higher detection response when dissolved in hexane than in dichloromethane. Linear range was $10^2-10^4$. Dimethyl trisulfide showed lowest limit of detection (LOD) value of 15.2 ppt, and methional highest of 70.5 ppb. Highest extraction efficiency for sulfur-containing compounds, particularly polar and small molecular weight compounds, was observed in 75mm carboxen/polydimethylsiloxane fiber, followed by 65mm polydimethylsiloxane/divinylbenzene and 100mm polydimethylsiloxane. Compared to SPME, less sulfur-containing compounds could be analyzed by SH, mainly due to its low extraction efficiency, although lower amount of artifacts were formed during sample preparation.