• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.131-134
• /
• 2002

Compressible gas flow through a convergent-divergent nozzle is choked at the nozzle throat under a certain critical pressure ratio, and then being no longer dependent on the pressure change in the downstream flow field. In practical, the flow field at the divergent part of the critical nozzle can affect the effective critical pressure ratio. In order to investigate details of flow field through a critical nozzle, the present study solves the axisymmetric, compressible, Wavier-Stokes equations. The diameter of the nozzle throat is D=8.26mm and the half angle of the diffuser is changed between $2^{\circ}\;and\;10^{\circ}$ Computational results are compared with the previous experimental ones. The results obtained show that the divergence angle is significantly influences the critical pressure ratio and the present computations predict the experimented discharge coefficient and critical pressure ratio with a good accuracy. It is also found that a nozzle with the half angle of $4^{\circ}$ nearly predicts the theoretical critical pressure ratio.

• 한국초등과학교육학회지:초등과학교육
• /
• 제31권3호
• /
• pp.347-357
• /
• 2012

The focus of this dissertation is on the comparative Analysis of Questions in the 'Matter Units of Elementary Science Textbook between the 7th Curriculum and the Revised Curriculum Year 2007. The results of the comparative Analysis in the dissertation are as follows: There were more closed questions than open questions in these elementary science textbooks both of the 7th Curriculum and the Revised Curriculum Year 2007. Cognitive-memory questions were the most frequently asked in all grade levels. In the Revised Curriculum Year 2007, Convergent thinking questions presented with higher rate than the 7th Curriculum. Divergent thinking questions and evaluative thinking questions was presented with a relatively lower rate than the 7th Curriculum. Question types were applied based on the characteristics of each unit rather than on children's developmental characteristics.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.26-32
• /
• 2006

The paper considers the electrical shock risk of the human body due to underwater leakage current in electric field. The characteristics of electric shock in fresh water due to the leakage of submerged electric facility in the bathtub in public baths were conducted. The exposed live electrode is modeled as a point source of electric current source. It is assumed that divergent monopole field exists in the vicinity of the current source, regardless of the presence of return electrode and insulating boundary. The electric potentials in the steel bathtub, Diesen and Mole and Flux3D program one are measured according to the distance from leakage source. The results show that the increased shock risk and safe distance are estimated by the bathtub of limited width and the voltage calculated on the basis of a divergent monopole field concept is compared with the measured value.

• 한국지구과학회지
• /
• 제35권5호
• /
• pp.333-341
• /
• 2014

A new set of basis functions was constructed using the Rossby-Haurwitz waves, which are the eigenfunctions of nondivergent barotropic vorticity equations on the sphere. The basis functions were designed to be non-separable, that is, not factored into functions of either the longitude or the latitude. Due to this property, the nodal lines of the functions are aligned neither along with the meridian nor the parallel. The basis functions can be categorized into groups of which members have the same degree or the total wavenumber-like index on the sphere. The orthonormality of the basis functions were found to be close to the machine roundoffs, giving the error of $O(10^{-15})$ or $O(10^{-16})$ for double-precision computation (64 bit arithmetic). It was demonstrated through time-stepping procedure that the basis functions were also the eigenfunctions of the non-divergent barotropic vorticity equations. The projection of the basis functions was carried out onto the low-resolution geopotential field of Gaussian bell, and compared with the theory. The same projections were performed for the observed atmospheric-geopotential height field of 500 hPa surface to demonstrate decomposition into the fields that contain disturbance of certain range of horizontal scales. The usefulness of the new basis functions was thus addressed for application to the eigenmode analysis of the atmospheric motions on the global domain.

• 설비공학논문집
• /
• 제23권8호
• /
• pp.543-548
• /
• 2011

New concept of wind energy conversion system is proposed to increase the energy density at a given working space. The quality of wind for wind power generation is depend on its direction and speed. However, the quality is not good on land because wind direction is changeable all the time and the speed as well. The most popularly operated wind turbine system is an axial-flow free turbine. But its conversion efficiency is less than 30% and even less than 20% considering the operating time. In this research, a cross-flow type wind turbine system is proposed with a convergent-divergent duct system to accelerate the low speed wind at the inlet of the wind turbine. Inlet guide vane is also introduced to the wind turbine system to have continuous power generation under the change of wind direction. In here, the availability of wind energy generation is evaluated with the change of the size of the inlet guide vane and the optimum geometry of the turbine impeller blade was found for the innovative wind power generation system.

• 유변학
• /
• 제10권2호
• /
• pp.82-91
• /
• 1998

액정고분자/폴리카보네이트 혼합계로 구성된 분자복합계를 쉬트상으로 가공할 때 취 약해지기 쉬운 횡단면 방향의 물성을 향상시키기 위하여 미세섬유상의 배향을 in-situ 상태 로 적절히 제어할수 있는 Simultaneous Convergent-Divergent(SCD) 다이를 설계·제작하 고 압출실험을 수행하여 얻은 압출 쉬트를 대상으로 구조-물성-가공의 상관관계를 조사하 였다. 액정고분자의 첨가 함량에 따른 토오크와 토출량의 변화는 액정고분자를 10wt% 소량 첨가하였음에도 현저한 감소 효과를 보였으며 약 30wt%일 때 최소로되었다. 이는 액정고분 자가 보강 기능외에 가공특성의 개선에도 큰 효과가 있어 가공조제로서의 가능성을 보이는 결과로 혼합계의 유변학적 특성 결과에서도 확인할수 있었다. 또 DSC와 DMA를 이용한 열 분석 결과 액정고분자의 함량이 증가함에 따라 PC의 유리전이온도가 다소 감소하는 현상을 보임에 미루어 이 혼합계는 부분적으로 상용성을 갖는 것으로 볼수 있으며 모폴로지 분석을 통해서도 이를 확인할수 있었다. TLCP/PC 혼합계로 구성되는 분자복합재를 SCD 다이를 사용하여 제조한 압출 쉬트의 방향성에 따른 기계적 물성은 기존의 쉬트 다이보다 흐름방향 으로는 다소 낮은 물성치를 보이지만 횡단면 방향으로는 물성이 현저히 향상됨을 관찰할수 있었다. 모폴로지 분석결과 기존의 쉬트 다이의 경우 벽면 부근에서는 액정고분자가 미세섬 유상으로 형성되어 흐름방향으로 배향되어 있지만 중심부에서는 액정 상태로 존재하는 반 면, SCD 다이의 경우 미세섬유상으로 형성된 액정고분자가 벽면에서부터 중심부로 갈수록 횡단면 방향으로 서서히 배향되어 있음을 확인할수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.349-352
• /
• 2008

수축-확대 초음속 노즐 내부에 분출된 이차제트에 의한 추력편향 제어에 관한 실험적, 수치적 연구가 진행되었다. 특정위치(노즐 목으로부터 12mm 떨어진 곳)에서 분출되는 이차제트 유동전압이 변화할 때 나타나는 제트유동의 추력편향 특성이 관찰되었다. 수치해석 결과는 동일한 경계조건에서 수행된 과거 연구결과 및 본 연구에서 수행된 쉴러린 유동가시화 결과와 비교되었으며, 정성적으로 좋은 일치를 나타냈다. 추력편향의 특성은 노즐 내부의 경사충격파의 반사구조, 즉, 이차제트 압력비 SPR의 크기에 관계되어 있음이 관찰되었다.

• 복식문화연구
• /
• 제27권1호
• /
• pp.72-80
• /
• 2019

A teaching manual was developed to incorporate the creative problem solving process into a fashion marking course. Students' creativity, problem solving, critical thinking, and analytical thinking are promoted by applying the creative problem solving process systematically to solve authentic business problems experienced by local apparel business owners. This teaching manual is based on the FourSight Model that consists of Clarify, Ideate, Develop, and Implement. Various tools promoting divergent thinking are also utilized in the process. A local fashion business is invited as a problem owner and four resource groups are formed with students based on the results of the Kirton Adaption Innovation Inventory. Each resource group consists of 6-8 students. The creative problem solving process is implemented into a classroom setting as four 75-minutes sessions that are held twice a week for two consecutive weeks. The local fashion business owner will be in presence during the first (Clarify) and last (Implement) sessions. The instructor facilitator meets with the problem owner outside the classroom three times including pre-session client interview, after the second (Ideate) session, and before the third (Develop) session. This modified CPS manual for fashion marketing and merchandising courses provides practical guidelines to work with local fashion businesses while providing students with learning opportunities of the creative problem solving process.

• 한국추진공학회지
• /
• 제24권4호
• /
• pp.12-24
• /
• 2020

이중목 노즐은 유체 추력벡터제어 분야에서 특히 효과적인 방법이며, 다른 축소부가 종래의 축소-확대 노즐의 확대부에 연결된다. 본 연구에서는 3차원 초음속 직사각형 노즐에서 추력벡터제어 성능에 대한 분사각의 영향을 조사하기 위하여 수치해석을 수행하였다. 5개의 분사각에 대하여 다루었으며, 편향각도, 분사 질량유량비, 시스템 전체 추력비, 전체 피칭 추력효율, 대칭면에서의 마하수 분포와 유선 및 다른 면에서 마하수 분포를 포함하는 임계 성능변화가 정량적으로 그리고 정성적으로 분석되었다. 본 연구의 결과는 특히 전투기 설계자에게 유용한 기술적 자료를 제공한다.

• Korean Journal of Acupuncture
• /
• 제38권1호
• /
• pp.1-7
• /
• 2021

Objectives : In the meridian pathway system, 5 yang meridians excluding bladder meridian pass ST12. In this study, we tried to find out why 5 yang meridians pass ST12. Methods : 15 classics of acupuncture and moxibustion literature - 『Huangdimingtangjingjixiao』, 『Zhenjiujiayijing』, 『Huangdineijingtaisu』, 『Beijiqianjinyaofang』, 『Waitaimiyaofang』, 『Ishimpo』, 『Taipingshenghuifang』, 『Tongrenshuxue-zhenjiutujing』, 『Zhenjiuzishengjing』, 『Shisijingfahui』, 『Zhenjiujuying』, 『Yixuerumen』, 『Zhenjiudacheng』, 『Leijing』, and 『Leijingtuyi』- were reviewed and compared. Results : Five yang meridians passed ST12, and large intestine meridian and triple energizer meridian were closely related to ST12 in divergent channels. Stomach meridian and gall bladder meridian were related to ST12 in meridian muscles. ST12 was related to small intestine meridian in main cure effect. ST12 is in the best position to enter the body cavity. Conclusions : It can be seen that ST12 is closely related to all internal organs through the characteristics of stomach meridian. Therefore, it is thought that ST12's various characteristics largely explains a pathway to enter the body cavity in the hand and foot three yang meridians.