• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.160-163
• /
• 1996

This paper deals with MCMBPC(Multivariable Constrained Model Based Predictive Controller) for nonlinear boiler system with noise and disturbance. MCMBPC is designed by linear state space model obtained from some operating point of nonlinear boiler system and Kalman filter is used to estimate the state with noise and disturbance. The solution of optimization of the cost function constrained on input and/or output variables is achieved using quadratic programming, viz. singular value decomposition (SVD). The controller designed is shown to have excellent tracking performance via simulation applied to nonlinear dynamic drum boiler turbine model for 16OMW unit.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.94-102
• /
• 1999

To estimate the effects of environmental noise on inhabitants' life in an apartment area at Taejon, noise levels and traffic volume of major roads were measured. 203 housewives were surveyed by questionaires including general factors, noise related factors and three items of life effects: subjective evaluations on the general environment, annoyance, and life disturbance due to environmental noise. At the boundary adjacent to the road with more traffic volume, noise level was higher; according to the time, the amount of noise level was in the morning, in the evening, at noon, and at night in order. Most of boundary noise levels were higher than those of recommended standard environmental noise levels in a residential area. The boundary noise level showed a very significant linear relationship with traffic volume of near roads. Noise level difference in the apartments adjacent to three roads was ranged 2.4~6.7dB between in windows open and close state. The apartments adjacent to 9 lane or 6 lane-road, which were protected by noise prevention wall and 20m or more distance from the roads, showed higher noise level at middle floors and high floors than those of low floors; but the buildings adjacent to 4 lane-road, with no protection, showed higher noise level at low and middle floors than those of high floors. Among 203 housewives, 120(59.1%) participated in this study, and 86(73.2%) of them answered that the most serious environmental noise was traffic noise from near roads. Comparing traffic noise levels with those of before-migration, 67.0% participants found the environmental noise became louder. Fifty eight(49.5%) of the participants wanted noise protection wall and 15(25.9%) of them were willing to charge the fee. Less perception on the present noise comparing to those before-migration, less traffic volume, and lower noise levels in the apartments were related to higher scores of self-evaluation on the environment. Higher susceptibility on the present noise, areas with more traffic volume, higher boundary noise levels, and higher noise levels showed higher scores of annoyance on environmental noise and life disturbance. Considering above all things, it was suggested that traffic noise in this area was the major problem of environmental noise, and its' effect was so serious that inhabitants needed some preventive measures for better life quality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.122-127
• /
• 2002

A frequency-domain PES estimation and its prediction method are proposed for the tightly-coupled servo/mechanical design of high-TPI HDD system above 100 kTPI. The major two disturbance energies which are related with mechanical vibrations inside of HDD are used to predict the drive-level PES, while considering closed-loop servo dynamics. One is the torque disturbance which mainly comes from aerodynamic excitation of HSA system and the other is the displacement disturbance from disk-spindle dynamics. In order to obtain the accurate error transfer function of closed-loop servo control, the plant model is measured by accurate experiment. The measured PES is compared with predicted one in terms of frequency-domain PES spectrum and its standard variation value. It is proved that the proposed frequency-domain PES estimation/prediction method is capable of predicting drive-level PES of high-TPI hard disk drive.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.949-958
• /
• 2012

Position tracking control of a link of a slave manipulator which needed to track the corresponding link of a master manipulator was addressed in this paper. Since driving torque from motor is transmitted through a set of flexible cable to link, the motion control system is modeled by a two-mass model connected with elastic coupling which has finite stiffness. Relative vibration of two-mass resonant system is a serious problem to operate manipulator. This paper proposed sliding mode control to reduce resonant vibration and fine position tracking control. Also, a pseudo-sliding mode control which uses a saturation function instead of a signum function was discussed and showed that the pseudo-sliding mode control can improve disturbance regulation performance as well as guarantees fine command tracking without chattering which is an inherent drawback of basic sliding mode control. In addition, a disturbance observer based sliding mode control has been suggested to improve disturbance regulation performance. The feasibility of the proposed control design was verified along with some simulation results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.591-599
• /
• 2005

This paper proposes a systematic design methodology for high-speed/high-precision servomechanisms by using a disturbance observer. A multiplicative uncertainty model and a two degree-of-freedom controller composed of a disturbance observer (DOB) and a PD controller are considered as subsystems. Analysis of the system performance, such as internal stability and bandwidth of a servomechanism according to subsystem parameters is conducted for better understanding of the dynamic behavior and interactions among the subsystem parameters. Then, an integrated design methodology, where the interactions are considered simultaneously, is applied to design processes of the servomechanism. The tradeoff relationship between disturbance suppression and measurement noise rejection of the DOB is considered through the design process. Numerical case studies show the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism. Moreover, the disturbance observer designed based on the proposed design methodology yields excellent disturbance suppression performance.

• Advances in aircraft and spacecraft science
• /
• v.1 no.4
• /
• pp.379-398
• /
• 2014

This article discusses the microvibration analysis of a cantilever configured reaction wheel assembly. Disturbances induced by the reaction wheel assembly were measured using a previously designed platform. Modelling strategies for the effect of damping are presented. Sine-sweep tests are performed and a method is developed to model harmonic excitations based on the corresponding test results. The often ignored broadband noise is modelled by removing spikes identified in the raw signal including a method of identifying spikes from energy variation and band-stop filter design. The validation of the reaction wheel disturbance model with full excitations (harmonics and broadband noise) is presented and flaws due to missing broadband noise in conventional reaction wheel assembly microvibration analysis are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.188-189
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.672-673
• /
• 2010

• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.743-751
• /
• 2001

A Prototype reaction wheel, named the Hankuk Aviation University (HAU) reaction wheel, has been developed for KAISTSAT satellite series. Torque and force disturbances are inherent in reaction wheels, and thus the force and torque characteristics should be examined for every newly developed reaction wheel. The torque and force disturbance noises in the prototype HAU reaction wheel are measured with a torque-measuring table developed for the present study. A new measuring procedure based on a simple principle is applied for the measurements. The frequency characteristics of the torque and force noises are analyzed by examining the power spectral density. The effect of the torque noise on the attitude stability is also examined through numerical simulations with a single-axis attitude model. The noise-induced attitude error and jitter and found to be well below the specified error limits for the KAISTSAT satellite series.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.198-203
• /
• 2002

A fuzzy logic controller design technique is proposed to apply for the control of flexible system under irregular disturbance. The fuzzy rules of $\ulcorner$Mode Selecting Fuzzy Controller$\lrcorner$ are constructed using displacement, velocity information and modal characteristics of the system. The frequency information of flexible system is picked up from $\ulcorner$Mode Selecting Unit$\lrcorner$ based on Fast-Fourier transform algorithm. Experiment is conducted to verify the proposed theoretical approach, Piezo ceramic and laser accelerometer are used as actuator and sensor in the experiments respectively