• Journal of Biosystems Engineering
• /
• v.32 no.3
• /
• pp.145-152
• /
• 2007

Uniformity of spray deposit is one of the important factors in spray performance affecting efficacy of pest management. Distributions of spray deposit on artificial targets were measured and analyzed to enhance the efficiency of spray application. The research was studied to understand the deposition characteristics of spray droplets and to determine the optimum conditions of chemical application. The deposit and its pattern by the lower fan speed was more uniform and higher than that by the higher fan speed. The upward blasting distance was limited within 3 m, but the limit to the ground level was expanded the distance more than 3.5 m because of the accumulated droplets. When the fan speed was higher at the distance of 2.5 m, deposit reached to maximum. When the distance increased, deposit was getting lower. At the both fan speeds, the deposit was concentrated below $30^{\circ}$ because of the gravitation and the resistance of wind. This research can be useful in designing an orchard sprayer and its operation for various tree canopies. To achieve a uniform distribution of deposit using the air-blast type orchard sprayer, the application rate from the middle boom should be increased as the air velocity to the upward increased. The spray rate to the side boom should be limited in a minimal level.

• The Korean Journal of Ecology
• /
• v.18 no.1
• /
• pp.89-97
• /
• 1995

In order to study the successional trend and the heterogeneity of forest community, we investigated DBH frequency distribution of dominant tree species and the changes of several community indicies including ${\beta}-diversity\;({\beta}_t)$ along a belt transect in Mt. Yongam, Kwangnung Experimental Forest, which has been preserved for about 530 years. Quercus serrata, Carpinus laxiflora, and C. cordata were the three dominant species and their DBH frequency distribution showed a reverse J-shaped form, so these species seem to maintain by themselves. Dominancediversity curve had a lognormal distribution. d and H'for pooled quadrats were 0.13 and 1.09, respectively, but these indices within each quadiat varied with the range of 0.13 to 0.57 and 0.5 to 1.09, respectively. The value of ${\beta}_t$ along the belt transect ranged from 0.14 to 0.42. These results suggest that this forest community is in the stable climax stage but the components experience a heterogeneous microsuccession.

• Journal of the Korean housing association
• /
• v.23 no.1
• /
• pp.19-26
• /
• 2012

This study examines how fence demolition may change the thermal environments of external spaces of houses and suggests what factors need to be considered when a fence is demolished. The results of the research are summarized as follows. In terms of the surface temperature, there was no significant difference in all time plots after the removal of all materials. However, applying greening methods (changing the surface materials, planting trees, and building a green roof following fence demolition) could lower the surface temperatures, calling for proper plans for various greening methods. The MRT results indicates that walls block solar radiation and provide shade, reducing radiant heat from roads and surrounding structures during the daytime when solar radiation directly effects surface temperatures. Also, the application of greening methods such as planting vegetation and trees could have shading and evapotranspiration effects, leading to a lower temperature distribution. The HIP results were similar to the MRT results. They indicated that walls block solar radiation within the residential sections and provide shade, resulting in a lower temperature distribution during the daytime. However, areas where greening methods such as a green roof or tree planting were applied showed $1{\sim}2^{\circ}C$ difference in temperature distribution.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.3
• /
• pp.98-105
• /
• 2009

The objective of this study is to develop numerical simulation model for analysing the wind speed reduction effect by coastal forest belts. The horizontally homogeneous turbulent flow equations, which are derived from the Reynolds-averaged Navier-Stokes method, both above the tree canopy and within the canopy were first formulated, and a first-order closure scheme with the capability of accounting the bulk momentum transport term within the canopy was employed. The averaged equations were solved numerically by finite difference method, FTCS (forward time centered space) scheme. The proposed model was also used to numerically investigate the effects of structural characteristic of forest belt on the wind speed. The effects of maximum leaf area density were evaluated, with the leaf area density of $1.0m^2/m^3$, $2.0m^2/m^3$, $3.0m^2/m^3$, and $4.0m^2/m^3$. Vertical distributions of leaf area, both uniform and varied distribution with a height, were also considered. A comparison of wind profile indicated that there was in good agreements between simulated and measured wind speed. Also, the results showed horizontal wind speed decreased under a height of the tree with increasing maximum leaf area density. In conclusion, in applications where computational efficiency and simplicity are desirable, the proposed numerical model has of great capability to determine the vertical turbulent momentum transport and wind profile in the costal forest belt.

• Korean Journal of Environment and Ecology
• /
• v.19 no.2
• /
• pp.162-176
• /
• 2005

This study was carried out as a field survey and a review of articles to investigate a characteristic of the distribution pattern in Korean endemic Corylopsis coreana. Distribution of Corylopsis coreana was found in Boseung-gun, Gwangyang-si, Suncheon-si, Jeumam-myeon Goheung-gun, Ganjeon-myeon Gurye-gun, Mt, Cheongwan Jangheung-gun, Nogodan Mt. Jiri in Jeollanam-do, Mt. Cheonhwang Namwon-si and Beamsagol and Banyabong Mt. Jiri in Jeollabuk-do, Sancheong-gun, hadong-gun and Namhea-gun in Gyeongsangnam-do and Mt. Backun, Pocheon-si in Gyeonggi-do. Total flora in the distribution region of Coryloplsis coreana was recorded as 242 taxa; 70 families, 159 genus, 216 species, 22 varieties, 4 forma. Ratio of taxonomic categories was consisted of Pteridophyte $5.8\%$, Gymnosperm $3.7\%$, Dicotyledon $18.6\%$ and Monocotyledon $71.9\%$. Ratio of Life cycle styles was Annual $1.7\%$ and Perennial $93.3\%$. Ratio of growth habit was appeared to Herb $44.2\%$, Vine $12.4\%$, Shrub $17.8\%$ and Tree $25.6\%$. The distribution region of Corylopsis coreana found to typical type which distribute in N, NE or NW slope. The native Corylopsis coreana of Sinjeonri Sungju-eup in Jellanam-do appeared to have a declining tendency which was caused by influence of tree lager.

• Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.364-375
• /
• 2019

Background: Ecologists continue to investigate the factors that potentially affect the pattern and magnitude of tree damage during catastrophic windstorms in forests. However, there still is a paucity of research on which trees are more vulnerable to direct damage by winds rather than being knocked down by the fall of another tree. We evaluated this question in a mixed hardwood-softwood forest within the Big Thicket National Preserve (BTNP) of southeast Texas, USA, which was substantially impacted by Hurricane Rita in September 2005. Results: We showed that multiple factors, including tree height, shade-tolerance, height-to-diameter ratio, and neighborhood density (i.e., pre-Rita stem distribution) significantly explained the susceptibility of trees to direct storm damage. We also found that no single factor had pervasive importance over the others and, instead, that all factors were tightly intertwined in a complex way, such that they often complemented each other, and that they contributed simultaneously to the overall susceptibility to and patterns of windstorm damage in the BTNP. Conclusions: Directly damaged trees greatly influence the forest by causing secondary damage to other trees. We propose that directly and indirectly damaged (or susceptible) trees should be considered separately when assessing or predicting the impact of windstorms on a forest ecosystem; to better predict the pathways of community structure reorganization and guide forest management and conservation practices. Forest managers are recommended to adopt a holistic view that considers and combines various components of the forest ecosystem when establishing strategies for mitigating the impact of catastrophic winds.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.73-82
• /
• 2018

Urban parks are important bird habitat in cities. Various studies have evaluated the habitat function of urban parks focused on field surveys. In this study, we performed applicability of NDVI obtained from Landsat 8 OLI image as a factor for spatial planning considered bird diversity. This study was classified with green boundary into three groups using NDVI's value. Environmental variables were calculated by the green area ratio of the surrounding area from 100m to 500m at each groups. The 20 environmental variables such as park area, park shape index, canopy of tree, etc. were derived, the regression analysis was performed as a dependent variable for the bird diversity of urban parks. As a result, the park area and the green area ratio of Group 3, classified high NDVI, within the 100m buffer were adopted as the variables in the regression model. In other words, it was confirmed that as the park becomes larger, the distribution of key green areas within a radius of 100m of the parks becomes higher, the diversity of bird species has increased. It was appropriate to use satellite image, NDVI to analyze species diversity in urban area.

• Journal of Ship and Ocean Technology
• /
• v.4 no.2
• /
• pp.38-57
• /
• 2000

This paper deals with reliability analysis of specially orthotropic plates subjected to transverse lateral pressure loads by using Monte Carlo simulation method. The plates are simply supported around their all edges and have a low short span to plate depth ratio with rectangular plate shapes. Various levels of reliability analyses of the plates are performed within the context of First-Ply-Failure(FPF) analysis such as ply-/laminate-level reliability analyse, failure tree analysis and sensitivity analysis of basic design variables to estimated plate reliabilities. In performing all these levels of reliability analyses, the followings are considered within the Monte Carlo simulation method: (1) input parameters to the strengths of the plates such as applied transverse lateral pressure loads, elastic moduli, geometric including plate thickness and ultimate strength values of the plates are treated as basic design variables following a normal probability distribution; (2) the mechanical responses of the plates are calculated by using simplified higher-order shear deformation theory which can predict the mechanical responses of thick laminated plates accurately; and (3) the limit state equations are derived from polynomial failure criteria for composite materials such as maximum stress, maximum strain, Tsai-Hill, Tsai-Wu and Hoffman.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.44.4-45
• /
• 2015

We investigate the properties of galaxies belonging to the filaments in cosmic void regions, using the void catalogue constructed by Pan et al. (2012) from the SDSS DR7. To identify galaxy filaments within a void, voids with 30 or more galaxies are selected as a sample. We identify 3067 filaments in 1050 voids by applying the filament finding algorithm based on minimal spanning tree and reducing processes to spatial distribution of the void galaxies. We study the correlations between galaxy properties and the specific size of filament which quantifies the degree of the filament straightness. For example, the average magnitude and the magnitude of the faintest galaxy in filament decrease as the straightness of the filament increases. We also find that the correlations become stronger in rich filaments than in poor ones with fewer member galaxies. We discuss a physical explanation to our findings and their cosmological implications.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.481-486
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.