• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.409-415
• /
• 2015

콘크리트충전강관(Concrete Filled Steel Tube, CFST) 기둥 설계 시, 강관의 국부좌굴을 방지하기 위하여 강관두께 t에 대한 기둥외경 D의 크기를 제한하고 있다. 각각의 설계시방서에서 각기 다른 최대 D/t값을 제안하고 있으며, 강재의 항복응력 $f_y$, 또는 $f_y$와 강재의 탄성계수 E의 식으로 표현된다. $f_y$와 E의 불확실성을 고려할 경우, 최대 D/t 계산식을 포함한 한계상태함수(limit state function)를 구성하여 CFST 단면의 국부좌굴에 대한 신뢰성지수(reliability index) ${beta}$를 산정할 수 있다. 결정된 ${beta}$는 사용된 최대 D/t 계산식에 따라 달라질 것이다. 이러한 신뢰성해석(reliability analysis) 결과의 가변성(variability)은 한계상태함수에 포함되는 전산모델 선택의 모호함(ambiguity)에서 기인한 것으로 모델링불확실성(modelling uncertainty)이라 한다. 모델링불확실성은 정보적불확실성(epistemic uncertainty)의 하나로 알려진 불명확성(non-specificity)으로 고려할 수 있으며, 불명확성은 가능성분포함수(possibility distribution function)를 사용하여 모델링할 수 있다. 본 연구 에서는 다른 3개의 최대 D/t 계산식을 사용하여 주어진 CFST 단면의 국부좌굴에 대한 신뢰성해석을 수행하고 각각의 신뢰성지수를 계산할 것이다. 불명확한 신뢰성지수들은 가능성분포함수를 사용하여 모델링되고, 이로부터 확신정도(degree of confirmation)를 측정할 것이다. 확신정도는 신뢰성지수가 감소하면 증가한다. 결과적으로, 확신정도에 따라 재구성된 신뢰성지수들을 얻을 수 있으며, 허용 확신정도와 함께 CFST 단면의 국부좌굴에 대한 신뢰성지수의 결정이 가능하게 된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.162-167
• /
• 2000

The warm deep drawability in square cup drawing is investigated about a newly developed high-strength steel sheet with retained austenite which is transformed into martensite during forming. For this investigation, six steps of temperature ranges, from room temperature to $250^{\circ}C$, and five kinds of drawing ratio, from 2.2 to 2.6 were adopted. As a result the maximum drawing force and the maximum drawing depth were affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. But blue shortness happened over $200^{\circ}C$. The FEM analysis using the LS-DYNA code is adopted to compare the experimental results with the analytical results for thickness strain distribution.

• 소성∙가공
• /
• 제9권2호
• /
• pp.186-192
• /
• 2000

Some deep drawing characteristics to the elevated temperatures were investigated for the SCPI steel sheets by using the Cr-coated die. For this investigations, six steps of temperature ranges, from room temperature to 25$0^{\circ}C$, and six kinds of drawing ratio, from 2.4 to 2.9 were adopted. As a result, the limiting drawing ratio, maximum drawing force, and the maximum drawing depth were sensitively affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. Some experimental results were compared with analytical results using the DYNA-3D code.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.792-797
• /
• 2013

In a indoor microwave power distribution system, matching-type power dividing switch is proposed and designed with a various power dividing ratio. A matching coaxial cable probe is used behind the output probe for the reflecting power absorption. Reflecting characteristics of the matching coaxial cable probe are calculated by analyzing the S-parameter of this structure. Newly proposed matching-type switch shows a very low return loss less than -30dB at the operating frequency of 2.45GHz with a dividing power ratio of 50.2%. The simulated results by use of 3-stage power divider shows a good agreement with the theoretical estimation for the various combination of the different switching ratio.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.252-257
• /
• 2005

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation' orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line in injection-molded products is assessed. And the effects of fiber content and injection mold-gate conditions on the fiber orientation are also discussed.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.90-94
• /
• 2013

A low loss power dividing switch in a indoor microwave power distribution system is proposed and designed with a various power dividing ratio. Switching characteristics are analyzed by use of the S-parameter of the switch. Newly proposed switch showed a very low return loss less than -30dB at the operating frequency of 2.45GHz. Three kinds of the switch in which we take out individually 1/2, 1/3 and 1/4 of the input power were fabricated, and measured the delivered, transmitted, and return loss power ratio. Simulated results showed that the lower power ratio is, the better accurate operating performance shows. This switch can switch the input power from 4.5% to 58% with the variance of 5% output power. The experimental results are in good agreement with the simulation within the return loss of 1%.

• Computers and Concrete
• /
• 제32권1호
• /
• pp.87-97
• /
• 2023

The bending of a porous FG plate is discussed in this study using a novel higher quasi-3D hyperbolic shear deformation theory with four unknowns. The proposed theory takes into consideration the normal and transverse shear deformation effect and ensures the parabolic distribution of the transverse stresses through the thickness direction with zero-traction at the top and the bottom surfaces of the structure. Innovative porous functionally graded materials (FGM) have through-thickness porosity as a unique attribute that gradually varies with their qualities. An analytical solution of the static response of the perfect and imperfect FG plate was derived based on the virtual work principle and solved using Navier's procedure. The validity and the efficiency of the current model is confirmed by comparing the results with those obtained by others solutions. The comparisons showed that the present model is very efficient and simple in terms of computation time and exactness. The impact of the porosity parameter, aspect ratio, and thickness ratio on the bending of porous FG plate is shown through a discussion of several numerical results.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.321-331
• /
• 1998

기술적으로 타당성이 있는 설계와 안전하고 경제적인 시공을 달성하기 위하여 필요한 터널해석의신빙성 확보는 굴착 및 보강작업으로 이루어진 일련의 시공과정을 역학적으로 파악해야 하고 암반과 지보재의 반응 거동에 대한 이해가 선행되어야 한다. 따라서 터널의 굴착으로 야기되는 암반거동과 지보재의 반응거동에 관한 연구를 위해 이론해와 유한요소 프로그램을 사용하였다. 암반-지보 반응거동의분석 결과 숏크리트의 물성에 대한 영향을 정량적으로 파악할 수 있었다. 단계별 굴착단계를 모사한 3차원 유한요소 해석을 통하여 지반 물성치와 무지보 굴착길이 그리고 측압계수가 하중분담율에 미치는 영향분석을 통하여 하중분담율을 결정할 수 있었다. 이러한 인자들의 경향을 파악함으로써 실제 터널 해석에 적용할 수 있을것이라 판단된다.

• Geomechanics and Engineering
• /
• 제37권1호
• /
• pp.73-84
• /
• 2024

Owing to the high strength and abrasive characteristics of cobble-boulders, cutters are easily worn and damaged during shield tunneling, making construction inefficient. In the present work, the stress on the ripper and scraper on the cutterhead was analyzed by the PFC3D-FLAC3D coupling model of shield tunneling to get insight into the performance of the cutterhead for cutting underground cobble and boulders. The numerical calculation results revealed that the increase in trajectory radius leads to a rising stress on the cutters, and the stress on the front cutting surface is greater than that on the back of the cutters. Moreover, the correlation between cutter wear and stress is revealed based on field measurement data. The distribution of the cutter stress is consistent with the cutter wear and breakage characteristics in actual construction, in which more extensive cutter stress is exhibited, extreme cutter wear appears, and more cutter breakage occurs. Finally, the relationship between the cutterhead opening area's layout and cutter wear distribution was investigated, indicating that the cutter wear extent is the most severe in the region where the radial opening ratio dropped sharply.

• 한국전자파학회논문지
• /
• 제17권2호
• /
• pp.110-116
• /
• 2006

본 논문에서는 4세대 이동통신 주파수 소요량 산출 방법론을 구현하고, 주파수 소요량의 변화에 큰 영향을 미치는 RATG간 트래픽 배분을, 주파수 효율성, FSU 이득과 시장 데이터 입력 파라미터 ${\rho}$에 따른 주파수 소요량의 변화를 시뮬레이션 하였다. 트래픽 배분율에 따른 주파수 소요량 변화는 $1\;GHz/20\;\%$정도였으며, 주파수 효율성에 따른 변화는 $5{\sim}9\;GHz$였다. 그리고 FSU 이득이 1 dB 증가하면 주파수 소요량은 약 0.9 dB 정도 감소하였다. 시장 데이터 입력 파라미터 ${\rho}=0.5$ 일 때 주파수 소요량은 801.63 MHz, ${\rho}=1.0$ 일 때는 6295.4 MHz로, 시장 데이터 입력 파라미터가 주파수 소요량에 미치는 영향이 가장 크다.