• 한국병원경영학회지
• /
• 제8권1호
• /
• pp.64-80
• /
• 2003

The separation policy of prescription and drug dispensing which has been implemented since the 1st of July, 2000, has brought about great changes in patients flow within the healthcare delivery system. The changes in the patients flow, in turn, resulted in the change in the distribution of financial resources among the participating entities in the healthcare delivery system: pharmacies, clinics, small hospitals, general hospitals, and teaching hospitals. The purpose of this study is to shed some light in the change in the financial performance of teaching hospitals under the separation policy that has created environmental changes such as the decrease in the number of out patients visits, the increase in the capital expenditures, the rapid increase in labor costs and so on. For the purpose, this study has compared and analyzed the balance sheets, the income statements and other operational data of three teaching hospitals located in D area. The data include two periods: before(year 1999) and after(year 2001) the implementation of the separation policy. The analysis was conducted with an emphasis on the changes in the financial ratios such as liquidity, turnover ratio, performance ratio. and capitalization ratio. The results show that the financial performances of the hospitals under study were weaker than before the implementation of the separation policy, and that, while the operating expenses have increased remarkably, there was no tendency to corresponding increase in revenue. And the result of analysis of other operational indicators also show that the performance of the hospitals is getting worse. Based on the results, this study has suggested the directions of the healthcare policies. This study suggests to improve the current model of separation of prescription and drug dispensing, to grant subsidies for the training of residents in teaching hospitals, and to lower the rate of patients' out of porket payment in teaching hospitals.

• 한국멀티미디어학회논문지
• /
• 제10권5호
• /
• pp.594-603
• /
• 2007

본 논문에서는 3D CAD 설계도면의 저작권 보호를 위한 워터마킹 방법을 제안한다. 제안한 방법에서는 3D CAD 설계도면의 기본성분인 선, 호 및 다각형면 성분 내에 이진 워터마크를 각각 삽입한다. 삽입 대상 성분은 3개 성분들 중 임의로 선택되거나 도면 내에 각 성분 분포에 따라 선택되어진다. 우선 라인 성분에서는 삽입 대상 라인의 길이와 연결된 라인들의 평균 길이 비율에 워터마크가 삽입된다. 또한 아크 성분에서는 아크의 중점을 기준으로 곡률 반경에 워터마크가 삽입되고, 다각형면 성분에서는 두 면의 길이 비율에 워터마크가 삽입된다. 실험결과로부터 제안한 방법이 파일변환, 회전, 이동, 스케일링, 성분 제거 및 레이어 제거 등과 같은 공격에 대하여 견고하며, 워터마크가 삽입된 각 성분의 SNR이 39.89-42.50 dB임을 확인하였다.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.385-389
• /
• 2012

Significant improvements in the switching voltage distribution are required for the development of unipolar resistive memory devices using $MnO_x$ thin films. The $V_{set}$ of the as-grown $MnO_x$ film ranged from 1 to 6.2 V, whereas the $V_{set}$ of the oxygen-annealed film ranged from 2.3 to 3 V. An excess of oxygen in an $MnO_x$ film leads to an increase in $Mn^{4+}$ content at the $MnO_x$ film surface with a subsequent change in the $Mn^{4+}/Mn^{3+}$ ratio at the surface. This was attributed to the change in $Mn^{4+}/Mn^{3+}$ ratios at the $MnO_x$ surface and to grain growth. Oxygen annealing is a possible solution for improving the switching voltage distribution of $MnO_x$ thin films. In addition, crystalline $MnO_x$ can help stabilize the $V_{set}$ and $V_{reset}$ distribution in memory switching in a Ti/$MnO_x$/Pt structure. The improved uniformity was attributed not only to the change of the crystallinity but also to the redox reaction at the interface between Ti and $MnO_x$.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.355-373
• /
• 2017

도심지에서의 터널굴착은 상부구조물과의 상호거동에 대한 이해가 필수적이다. 도심지에 사용중인 대부분의 구조물은 말뚝기초로 상부의 하중을 지지하고 있어, 터널 굴착 시 반드시 영향을 받는다. 따라서 본 연구에서는 실내모형시험을 통해 기존의 군말뚝 기초 하부 터널굴착에 따른 축력 분포와 지반의 거동을 분석하였다. 말뚝 기초는 2, 3 열 말뚝으로 가정되었으며, 말뚝 선단부와 터널 천단부의 이격거리는 터널직경에 대한 일반화를 위해 터널 직경(D) 대비 0.5D, 1.0D 그리고 1.5D로 고려되었다. 지반은 약 30%의 상대밀도(Dr)를 가지는 느슨한 사질토로 형성되었으며, 말뚝의 축력 분포를 측정하기 위해 말뚝에 변형률게이지(strain gauge)를 부착하였다. 또한, 이격거리에 따른 군말뚝의 침하와 인접지반의 침하를 변위센서(linear variable differential transformer; LVDT)와 다이얼게이지(dial gauge)를 통해 측정였으며, 터널굴착에 따른 지중의 변형을 근거리사진계측기법(close range photogrammetric technique)을 통해 측정하였다. 수치 해석을 통해 실내모형시험 및 근거리사진계측 결과와 비교 분석하였다. 본 연구에서는 체적손실율(volume loss; $V_L$) 개념을 이용하여 터널굴착을 모사하였으며, 1.5%로 적용되었다. 연구결과, 이격거리가 멀어질수록 말뚝의 축력감소는 작게 나타났으며, 침하량은 모두 유사한 경향을 나타내었다. 특히, 말뚝 선단부와 터널 천단부의 이격거리가 0.5D에서 1.0D로 증가할 때 축력과 침하량의 가장 큰 감소율이 가장 큰 것으로 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.37-40
• /
• 2007

Large critical current is one of the prerequisites for the design of superconducting electrical equipments with large power capacity. To enlarge the critical current. multiple parallel connection is inevitable. In multiple parallel superconducting coils. the difference in normal resistance of each shunt leads to unequal current distribution. which may yield burnout. Therefore. uniform current distribution is required for a stable operation of multiple parallel superconducting coils. In this paper, Rogowski coils were fabricated to measure each shunt current of a 4-parallel superconducting coil. Four Rogowski coils were installed at the copper bars, which are used as current leads in superconducting coils. As a result, linearity of the Rogowski coils was ascertained and coefficients of each coil, the ratio of voltage and current, were derived. The coefficients were compared with theoretically calculated values. Based on the coefficients, each shunt current was calculated in a 4-parallel superconducting coil, where uniform current. distribution was confirmed. This paper verified the feasibility of the fabricated Rogowski coils as well as operational stability of the 4-parallel superconducting coil in 77K.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.279-287
• /
• 1990

An experimental study of the heat transfer characteristics between circular water jet and cylindrical inner surface is presented. The ratios of the semi-cylinder's inner diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that cirucmferential distribution of the heat transfer coefficient peaked at the stagnation point and, there occurred a kind of a secondary maximum of heat transfer that moved toward to stagnation point as the ratio d/D increased. The local heat transfer coefficient increases as the Reynolds number becomes larger, and the rate of increase is subjected to the influence of d/D & position of angle. Also, optimum heights of supplementary water which brings about the augmentation of heat transfer are S/D=1 for the stagnation point, the position of $15^{\circ}$ & $30^{\circ}$ angle, but for the positions of $45^{\circ}$ angle (d/D=10~11.67), $60^{\circ}$ & $75^{\circ}$ angle, the heat transfer coefficients in the case of using supplementary water are smaller than simple jet (S/D=0).

• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.1-6
• /
• 2013

TSV는 그동안 3D IC 적층을 하는데 핵심 기술로 많이 연구되어 왔고, RC delay를 줄여 소자의 성능을 향상시키고, 전체 시스템 사이즈를 줄일 수 있는 기술로 각광을 받아왔다. 최근에는 TSV를 전기적 연결이 아닌 소자의 열관리를 위한 구조로 연구되고 있다. TSV를 이용한 liquid cooling 시스템 개발은 TSV 제조, TSV 디자인 (aspect ratio, size, distribution), 배선 밀도, microchannel 제조, sealing, 그리고 micropump 제조까지 풀어야 할 과제가 아직 많이 남아있다. 그러나 TSV를 이용한 liquid cooling 시스템은 열관리뿐 아니라 신호 대기시간(latency), 대역폭(bandwidth), 전력 소비(power consumption), 등에 크게 영향을 미치기 때문에 3D IC 적층 기술의 장점을 최대로 이용한 차세대 cooling 시스템으로 지속적인 개발이 필요하다.

• 한국분무공학회지
• /
• 제2권4호
• /
• pp.7-14
• /
• 1997

Laser Raman scattering method has been applied to measure equivalence ratio of methane/air mixture in injected spray. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity signal. Raman shifts and Raman scattering cross -sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ are measured precisely. Our results show an excellent agreement with those of other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air shows that $O_2:N_2=0.206:0.794$. We used gas injector which was operated at 1 bar. Methane is used as a fuel. Spray region is $10mm\times37mm$ and this region is divided into 80 points. In Raman signals are obtained and ensemble averaged for each point. 3-d and contour plot of distribution of equuivalence ratio is presented. Our measured results show that the equivalence ratio of methane/air mixture in methane-rich region is reasonable. However, more study is necessary for methane-lean region because background noise level is almost same as Raman intensity of methane.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.649-661
• /
• 2017

This paper is motivated by the lack of studies in the technical literature concerning to the influence of carbon nanotubes (CNTs) waviness and aspect ratio on the vibrational behavior of functionally graded nanocomposite annular sector plates resting on two-parameter elastic foundations. The carbon nanotube-reinforced (CNTR) plate has smooth variation of CNT fraction based on the power-law distribution in the thickness direction, and the material properties are also estimated by the extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. Parametric studies are carried out to highlight the influence of CNTs volume fraction, waviness and aspect ratio, boundary conditions and elastic foundation on vibrational behavior of FG-CNT thick sectorial plates. The study is carried out based on three-dimensional theory of elasticity and in contrary to two-dimensional theories, such as classical, the first- and the higher-order shear deformation plate theories, this approach does not neglect transverse normal deformations. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. For an overall comprehension on 3-D vibration of annular sector plates, some mode shape contour plots are reported in this research work.