• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1982-1984
• /
• 1996

In this paper, we have evaluated the physical characteristicsof the Pt/Cr bilayer, fabricated the micro hot plate by using the Pt/Cr bilayer and E-beam evaporated oxide as a passivation layer, and simulated the thermal distribution by using the commercial software FIDAP. From the researches the sheet resistance of Pt/Cr bilayer didn't be affected by the Cr layer thickness. This results was considered due to the Cr-oxide resided at the interface between Pt and Cr layer. After manufacturing the hot plate, we measured its temperature by type k thermo-couple and I.R. thermo-vision system. In those experiments, the emission coefficient( ${\varepsilon}$ ) of the E-beam evaporated oxide was 0.5 and the temperature of centural region was reached about $305\;^{\circ}C$ at 1.3 watts. The temperature simulation obtained by FIDAP commercial package stewed that the temperature of centural region was about $311\;^{\circ}C$ after 5 sec.

• 정보학연구
• /
• 제8권1호
• /
• pp.43-50
• /
• 2005

Quantitative analysis for distribution of penetrating ultrasound in vivo is very important to determine the treatment region and method. In this paper, we constructed a simplified 2-D femoral region model that consists of skin-fat-muscle-bone layered system, and simulated the pressure distribution in the model in case of applying ultrasound using Finite Element Method(FEM). The ultrasound used in the simulation was assumed to be pulse wave and the pressure distribution was analyzed during only one period of pulse wave. In order to find the penetration depth, amplitude of pressure and sphere that ultrasound reaches in the model, we performed the simulation with varying the applied frequency, transducer size and amplitude of transducer's output. The result showed that applied frequency is inversely proportional to the penetration depth and amplitude of pressure but the amplitude of transducer's output is proportional to the amplitude of pressure in the model. Also, the sphere that ultrasound reaches was widened and the amplitude of pressure became larger as the transducer size became larger. This results were similar to that obtained from the previous model consisting of fat-muscle-bone layered system, but we observed that the pressure of ultrasound is decreased due to the decrements of pressure by the absorption coefficient of skin and the interference that depends on the reflection of ultrasound caused by the difference of acoustic impedance of skin and fat. Finally, we can infer that the model proposed in this study is closer to the realistic model than the previous ones. It shows that the results obtained from this study can be useful in designing the ultrasound treatment instrument or in setting up the treatment plan.

• 한국산업보건학회지
• /
• 제3권2호
• /
• pp.194-203
• /
• 1993

Quality Control programs for industrial hygiene laboratory have successfully been operated since the 1st round was initiated in April 1992. Three rounds have been completed. Overall analytical performance of participants was improved through a subsquent round. The first round had a large variation among analytical results of all participants, 26.34%~504.22% of coefficient of variation. But the variation of analytical performance in the 2nd and 3rd rounds decreased to 40.42%~52.55% and 10.74%~20.98%, respectively. The difference of analytical performance among participants was decreased by operation of subsquent round. By distribution of Running Performance Index (RPI), over 50% of participants belongs to Category 3 in the first round. The average percentage of participants assigned to Category 3 in the 2nd and 3rd round was decreased to 37.2%. A definite analytical performance improvement of participants seems to be obtained. "A" and "B" group have more participants assigned to Category 3 than those of "C" group through the distribution of RPI by group divided to similar participant. By the distribution of RPI all participants, the percent of participant being over 200 RPI in the 1st round was 43%~52%, but decreased to 9%~29% and 9%~27%, in the 2nd and 3rd round, respectively. These results mentioned above indicate that the analytical performance of all participants have been improved by subsquent Quality Control Program although newcomers joined and a few participants droped out. But, there are some participants with poor analytical performance. Industrial Health Research Institute (IHRI) will offer service such as education, communication and visitation to them, and improve quality of their analytical performance in the future.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.1-11
• /
• 2000

The influence of the first coating layer on the properties of the second coating layer is reported. For various model coating composition, ratios of first and second coating weights are used to generate coating layers. The void volume, pore size distribution and light scatter coefficient of the coatings are measured. In some cases, the fine material from the second layer seems to penetrate the first layer to reduce the void fraction of the total system. Rapid setting coating, for example thin layers on porous first layer tends to generate porous coating layers.

• 소성∙가공
• /
• 제16권2호
• /
• pp.144-149
• /
• 2007

The superplastic forming/diffusion bonding(SPF/DB) is widely used in the automotive and aerospace industry because it has great advantage to produce complex, light and strong parts. But the superplastic forming process requires much forming time and generates excessive thinning in the thickness distribution of formed part. It is necessary to minimize trial and error for SPF/DB Process. Finite element analysis using $L_{18}$ orthogonal may table of Taguchi method for 3-Sheet D/B process is carried out. Through the study, effect of process parameters, such as DH region size, thickness and friction coefficient, is evaluated and the optimum condition is derived.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.624-640
• /
• 2017

In this paper, the slamming coefficients on local members of a jacket structure under plunging breaker are studied based on numerical simulations. A 3D numerical model is used to investigate breaking wave forces on the local members of the jacket structure. A wide range of breaking wave conditions is considered in order to get generalized slamming coefficients on the jacket structure. In order to make quantitative comparison between CFD model and experimental data, Empirical Mode Decomposition (EMD) is employed for obtaining net breaking wave forces from the measured response, and the filtered results are compared with the computed results in order to confirm the accuracy of the numerical model. Based on the validated results, the slamming coefficients on the local members (front and back vertical members, front and back inclined members, and side inclined members) are estimated. The distribution of the slamming coefficients on local members is also discussed.

• Journal of Radiation Protection and Research
• /
• 제15권2호
• /
• pp.7-16
• /
• 1990

알우미나, 실리카겔, 제오라이트 3A, 카오린 그리고 나트륨-벤토나이트에 대한 방사성코발트 및 루테늄 흡착을 수소이온농도, 핵종 농도 그리고 이온강도를 함수로 고찰하였다. 토양에 대한 코발트 및 루테늄의 지연계수는 공극율 측정으로 결정하였다. 코발트 및 루테늄의 가수분해 분자종은 물리적 흡착반응으로 고체 표면과 상호작용한다. 코발트 및 루테늄의 후로인드릿히 흡착 등온식은 직선이다. 코발트 및 루테늄의 흡착은 이온강도의 증가에 따라 감소한다. 지연계수에서 공극율 증가효과는 분배계수의 증가효과와 반한다.

• 한국해안·해양공학회논문집
• /
• 제26권5호
• /
• pp.278-284
• /
• 2014

연안 생태환경변화의 주요 지표로 이용되는 수온은 기온과 밀접한 상관관계가 있기 때문에 기온자료를 이용하여 기후변화에 따른 수온변화와 연안 생태환경변화를 추정할 수 있다. 기후변화는 기온 및 수온의 발생빈도 변화와 연안의 생태환경변화를 유발하기 때문에 기온과 수온의 발생 빈도분포 함수를 추정하는 연구가 필요하다. 본 연구에서는 우리나라 연안의 장기 기온자료를 이용하여 빈도분포함수를 추정하였다. 빈도분포 함수는 조위 분포함수 추정(Cho et al., 2003), 수온 분포함수 추정(Jeong et al., 2013) 등에 사용된 Bi-modal 형태의 분포함수를 이용 하였으며, 분포함수의 매개변수는 최소자승법으로 최적 추정하였다. 최적 추정된 매개변수는 기온자료의 기본적인 통계정보에 해당하는 평균, 표준편차, 왜도계수와 강한 상관관계를 보이고 있는 것으로 파악되었으며, 통계정보를 이용한 매개변수 추정공식의 RMS 오차는 5% 정도로 파악되었다. 한편 본 연구에서 제시하는 Bi-modal 분포함수는 전체적인 기온 분포양상을 적절하게 표현하고 있으나, 고온 영역의 급격한 빈도감소 양상 및 관측 자료의 분포에서 보이는 작은 첨두 재현에는 한계가 있는 것으로 파악되었다.

• 대한한방소아과학회지
• /
• 제14권1호
• /
• pp.127-136
• /
• 2000

The frequency of weak children, derived from constitutional and functional factors, has increased recently, but their symptoms have never been observed and analysed. A survey was conducted to evaluate and understand the characteristics of weak children. 311 children who had visited in the weak child clinic of Kyunghee Oriental Medical Hospital from January, 1999 to August, 1999, were the respondents of the Weak Child Questionnaire. They were divided into 4 groups by age and birth weight, and statistical significances were tested by one way analysis of variances and bivariate correlation analysis among groups. The results obtained were as follows: 1. Distribution of sex : male 191 cases, female 120 cases 2. The distribution of age showed the highest in $2{\sim}6$ years(45.3%), followed by $7{\sim}12$ years(31.8%), $0{\sim}1$ years(18.0%), over 13 years(4.8%) in order. There was a statistical difference of all symptoms' mean, except respiratory symptoms, among groups(p<0.01). 3. The distribution of birth weight showed the highest in $2.5{\sim}3.3kg(43.4%)$, followed by $3.3{\sim}4.1kg(39.5%)$, under 2.5kg(5.1%), over 4.lkg(2.1%) in order. There was a statistical difference of digestive symptoms' and total score mean among groups(p<0.01, p<0.05 respectively). 4. The correlation coefficient between general symptoms' mean and other symptoms´ is the highest(p<0.01). From the above results, it was suggested that general symptoms are representative of weak children's characteristics.

• 농업과학연구
• /
• 제43권5호
• /
• pp.715-722
• /
• 2016

Rapid determination of food quality is important in food distribution. In this study, the chemical properties of oats were analyzed using visible-near infrared (VIS-NIR) spectroscopy. The objective of this study was to develop and validate a predictive model of oat quality by VIS-NIR spectroscopy. A total of 200 oat samples were collected from domestic and import markets. Reflectance spectra, moisture, protein, fat, Fe, and K of oat samples were measured. Reflectance spectra were measured in the wavelength range of 400 - 2,500 nm at 2 nm intervals. The reflectance spectrum of an oat sample was measured after sample cell and reflectance plate spectrum measurement. Preprocessing methods such as normalization and $1^{st}$ and $2^{nd}$ derivations were used to minimize the spectroscopic noise. The partial-least-square (PLS) models were developed to predict chemical properties of oats using a commercial software package, Unscrambler. The PLS models showed the possibility to predict moisture, protein, and fat content of oat samples. The coefficient of determination ($R^2$) of moisture, protein, and fat was greater than 0.89. However, it was hard to predict Fe and K concentrations due to their low concentrations in the oat samples. The coefficient of determinations of Fe and K were 0.57 and 0.77, respectively. In future studies, the stability and practicability of these models should be improved by using a high accuracy spectrophotometer and by performing calibrations with a wider range of oat chemicals.