• 동력기계공학회지
• /
• 제10권4호
• /
• pp.99-104
• /
• 2006

Young's modulus of composite has been predicted by Eshelby's equivalent inclusion method modified with Mori-Tanaka's mean field theory, where short fibers of aspect ratio distribution are assumed to be aligned. Young's modulus of the composite is predicted with the smallest class interval for simulating the actual distribution of fiber aspect ratio, which is compared with that computed using different class intervals. Young's modulus of the composite predicted with mean aspect ratio or the largest class interval is overestimated by the maximum 10%. As the class interval of short fibers for predicting Young's modulus decreases, the predicted results show good agreements with those obtained using the actual distribution of fiber aspect ratio. It can be finally concluded from the study that if and only if the class interval of short fiber normalized by the maximum aspect ratio is smaller than 0.1, the predicted results are consistent with those obtained using the actual distribution of aspect ratio.

• 비교문화연구
• /
• 제43권
• /
• pp.459-483
• /
• 2016

The main objective of this paper is to test the major prediction of the Aspect Hypothesis on interlanguage narratives collected from 171 Ibibio ESL learners in a classroom setting using sets of picture stories. Aspect Hypothesis predicts that lexical aspectual classes of verbs would determine the pattern of acquisition and distribution of tense-aspect morphology at the very early stages of L2 acquisition of tense-aspect verbal morphology. That is, telic verbs would be marked with the past tense-aspect verbal morphology before atelic verbs in the interlanguage of ESL learners irrespective of their L1 background. The results of our data analyses show a significant effect from the lexical aspect on the acquisition and distribution of tense-aspect morphology with chi-square statistics of ($x^2=196.92$,df = 6, n = 1664, p = <.0001). However, the effect of the lexical aspect is shown to be more prominent among Ibibio ESL learners at higher levels of proficiency. This is contrary to the prediction regarding Aspect Hypothesis. The paper concludes that the influence of the lexical aspect on the pattern of acquisition and distribution of tense-aspect morphology may be universal but the actual point along the developmental pathway when such influence is obtainable is yet to be determined. This calls for more research into the pattern of the L2 acquisition of tense-aspect verbal morphology.

• Spatial Information Research
• /
• 제16권3호
• /
• pp.359-372
• /
• 2008

본 연구에서는 우리나라 소나무의 공간분포를 추정하고, 소나무 공간분포와 출현패턴을 효과적으로 설명할 수 있는 최적의 격자크기를 제안하였다. 다음으로 최적 격자크기에서 지형인자에 따른 소나무의 출현빈도를 분석하고, 지형인자가 소나무 분포에 미치는 영향력을 비교함으로써 소나무 공간분포를 지형학적으로 분석하고자 하였다. 그 결과 1m 격자크기의 DEM은 방위를 동, 서, 남, 북으로 세밀하게 구분하고 소나무도 모든 방위에 분포한 한 반면, 격자크기가 증가함에 따라 주능선에 의해 방위를 동, 서, 남 또는 동, 남과 같이 단순화시켜서 구분할 수 있었으며 소나무 또한 특정 방위에 주로 분포하는 특징을 보였다. 소나무 출현빈도 분석결과 격자크기가 100m일 때 소나무 공간분포 특징을 설명할 수 있었으며, 방위, 경사, TWI가 소나무 공간분포에 미치는 영향력 비교를 통해서는 방위의 영향력이 경사의 영향력보다 크고 경사와 TWI 사이의 영향력 차이는 크지 않은 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2803-2810
• /
• 2007

Three dimensional numerical studies were carried out to investigate the effect of aspect ratio on gas slip flow in rectangular microchannels. We focused on aspect ratio effect on slip velocity, pressure distribution and mass flow rate. As aspect ratio decreases the wall slip velocity also decreases. As a result nonlinearity of pressure distribution increases. The slip velocities on sides and top/bottom walls are different and this difference decreases with increasing aspect ratio. These two velocities are equal when aspect ratio is 1. The ratios of slip mass flow rate over noslip mass flow rate increases with increasing aspect ratios.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.805-814
• /
• 2011

알루미늄 플레이트-핀 열교환기는 석유 및 가스 처리공정에서 널리 사용되고 있다. 알루미늄 플레이트-핀 열교환기의 성능은 각 유체의 헤더 및 분배기에서의 분배 성능에 의하여 크게 영향을 받는다. 본 연구에서는 CFD(Computational fluid dynamics)를 이용하여 알루미늄 플레이트-핀 열교환기의 측면 입구 형태의 분배기를 모델링하고, 입구 조건과 형상비의 변화에 따른 상대 및 절대 불균등 분배도를 고찰하여 최적 분배기 형상비를 제시하였다.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.97-105
• /
• 1998

The fiber oriented condition inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to meausure the fiber orientation angle for the determination of molding conditions, mechanical characteristics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine the accuracy of intersection counting method. The fiber orientation function measured by intersection counting method using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the scanning line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.

• 전기화학회지
• /
• 제12권4호
• /
• pp.317-323
• /
• 2009

돌출부를 지니고 있는 전극의 전기도금 공정에 대한 이론적 이차 전류분포에 대하여 고찰하였다. 전극이 모두 전도체인 경우(Case 1)와 돌출부위만 전도체인 경우(Case 2) 두 가지 경우에 대하여 인가전위, 이온교환 전류밀도와 용액의 비전도도의 비인 $\xi$값, aspect ratio의 영향 등에 대하여 살펴보았다. 그 결과 인가 전위와 $\xi$값이 증가할수록 전류분포는 불균등화가 심화됨을 알 수 있었다. Aspect ratio가 작아질수록 전류분포가 보다 균등화되며 Case 2의 경우가 Case 1의 경우 보다 균등도가 좋아짐을 알 수 있었다. 돌출부위가 다양한 모양으로 이루진 전극에 대해서도 이 모델을 적용한 결과 전극 표면에 따른 국부 전류분포를 동시에 계산할 수 있음을 알 수 있었고 이 경우에도 이전과 마찬가지로 $\xi$값이 감소할수록 전류분포의 균등도가 좋아짐을 알 수 있었다.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.974-982
• /
• 1992

본 연구에서는 Wheel 미립화기로 CWM을 분사시켰을때 Vane의 형태가 혼합연료 방울의 크기분포에 미치는 영향을 실험적으로 연구하는 것이며 그 연구 내용을 요약하 면 다음과 같다. .Vane의 형상계수(Aspect ratio)가 연료방울의 크기분포에 미치는 영향 .Vane의 각도가 연료방울의 크기분포에 미치는 영향 .미분탄 부하도와 연료방울의 SMD변화 .미분탄 분포의 평균크기변경에 따른 연료방울의 SMD변화 위에서 형상계수라함은 Vane의 출구직경(d)와 Vane의 출구길이 (L)의 비(L/d)를 의미 하고 있다.

• Wind and Structures
• /
• 제23권5호
• /
• pp.465-483
• /
• 2016

This study aims to enhance the understanding of the surface pressure distribution around rectangular bodies, by considering aspects such as the suction pressure at the leading edge on the top and side faces when the body aspect ratio and wind direction are changed. We carried out wind tunnel measurements and numerical simulations of flow around a series of rectangular bodies (a cube and two rectangular bodies) that were placed in a deep turbulent boundary layer. Based on a modern numerical platform, the Navier-Stokes equations with the typical two-equation model (i.e., the standard $k-{\varepsilon}$ model) were solved, and the results were compared with the wind tunnel measurement data. Regarding the turbulence model, the results of the $k-{\varepsilon}$ model are in overall agreement with the experimental results, including the existing data. However, because of the blockage effects in the computational domain, the pressure recovery region is underpredicted compared to the experimental data. In addition, the $k-{\varepsilon}$ model sometimes will fail to capture the exact flow features. The primary emphasis in this study is on the flow characteristics around rectangular bodies with various aspect ratios and approaching wind directions. The aspect ratio and wind direction influence the type of wake that is generated and ultimately the structural loading and pressure, and in particular, the structural excitation. The results show that the surface pressure variation is highly dependent upon the approaching wind direction, especially on the top and side faces of the cube. In addition, the transverse width has a substantial effect on the variations in surface pressure around the bodies, while the longitudinal length has less influence compared to the transverse width.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.953-959
• /
• 1998

To investigate accuracy of intensity method for measurement of the fiber orientation distribution, fiber orientation function is calculated by drawing simulation figures for the fiber orientation as varying fiber aspect ratio, fiber area ratio, and fiber orientation state, respectively. The values of fiber orientation function measured by intensity method are compared with the calculated values of fiber orientation function. The results show that measurement accuracy of the fiber orientation angle distribution by intensity method is affected by the fiber aspect ratio when the total length of oriented fiber is same. The average gradient of fiber orientation function is 0.94 for 1000mm of the total fiber length and is 0.93 for 2000 mm when the fiber aspect ratio is over 50. Measurement accuracy by intensity method is about 94% and the reliable data can be obtained by intensity method.