• 한국통신학회논문지
• /
• 제37A권11호
• /
• pp.952-960
• /
• 2012

간단한 부호기를 사용하는 분산 동영상 부호화 시스템은 복호기에서 생성한 부가정보와 원 Wyner-Ziv (WZ) 프레임간의 차이를 채널부호를 이용해 정정하게 되는데 오류정정이 제대로 이루어지지 않으면 복호기에서 피드백 채널을 통해 추가 패리티 비트를 요청하게 된다. 특히 이동통신 등과 같이 제한된 환경에서 분산 동영상 부호화 시스템을 사용하기 위해서는 전송률 및 부호화 왜곡을 효율적으로 제어할 수 있어야 한다. 본 논문에서는 부호기에서 비트 전송률을 제한함으로써 통신환경에 맞도록 비트 전송률을 일정하게 제어하는 방법을 제안한다. 제안하는 방법은 전송률을 적절히 제어할 뿐 만 아니라 부호화 성능도 일정하게 유지하는 장점이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.329-331
• /
• 2005

This paper proposes a line-to-ground cable fault location method for underground distribution system. The researched cable is composed of core and sheath. And underground cabke system has been analyzed using Distributed Parameter Circuit. The effectiveness of proposed algorithm has been verified through EMTDC simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.965-969
• /
• 1993

In this paper, the GPC algorithm is developed for ACS(advanced control system). ACS equals to DCS(distributed control system) with some advanced control algorithm, for example, fuzzy logic controller, autotuning. By its embedded structural control language, which uses simple function codes corresponding to each function blocks, it is possible to construct multiloop controller. The developed GPC function code is divided by RLS (recursive least square) parameter estimator and GPC controller. Simulation result show the availability of GPC function code using the control language.

• 한국통신학회논문지
• /
• 제36권6C호
• /
• pp.368-375
• /
• 2011

분산 동영상 부호화 시스템에서는 복호기에서 Wyner-Ziv 프레임을 복원하기 위해서 부호기에서 생성된 패리티비트를 사용하게 된다. 이때 오류 정정 부호로 터보 부호나 LDPC 부호가 사용되는데 복호기에서는 원 Wyner-Ziv 프레임을 모르기 때문에 오류 정정을 위한 효과적인 상관 잡음 모델링이 필요하다. 본 논문에서는 복호기에서 Wyner-Ziv 프레임과 부가정보 간의 상관 잡음을 효과적으로 모델링하기 위한 방법을 제안하고 추정한 상관 잡음 모델이 분산 동영상 부호화 시스템에 미치는 영향을 분석한다. 또한 모의실험을 위해 H.264 intraframe 부호화 방법으로 부호화된 키 프레임을 사용하였는데 부호기에서 동적으로 키 프레임 양자화 파라미터 값을 추정하기 위한 방법을 제안하고 성능을 해석한다.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.643-653
• /
• 2009

Voltage-controlled voltage source inverter (VCVSI) based distributed generation systems (DGS) using renewable energy sources (RES) is becoming increasingly popular as grid support systems in both remote isolated grids as well as end of rural distribution lines. In VCVSI based DGS for load voltage stabilization, the power angle between the VCVSI output voltage and the grid is an important design parameter because it affects not only the power flow and the power factor of the grid but also the capacity of the grid, the sizing of the decoupling inductor and the VCVSI. In this paper, the steady state modeling and analysis in terms of power flow and power demand of the each component in the system at the different values of maximum power angle is presented. System design considerations are examined for various load and grid conditions. Experimental results conducted on a I KVA VCVSI based DGS prove the analysis and simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.204-206
• /
• 2009

Opportunistic scheduling is one of the important techniques to maximize multiuser diversity gain. In this paper, we propose a distributed opportunistic scheduling scheme for ad-hoc network. In the proposed distributed scheduling scheme, each receiver estimates channel condition and calculates independently its own priority with probabilistic manner, which can reduce excessive probing overhead required to gather the channel conditions of all receivers. We evaluate the proposed scheduling using extensive simulation and simulation results show that proposed scheduling obtains higher network throughput than conventional scheduling schemes and has a flexibility to control the fairness and throughput by controlling the system parameter.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2262-2264
• /
• 2007

In this paper, we propose a distributed opportunistic scheduling scheme for wireless LAN network. Proportional fair scheduling is one of the opportunistic scheduling schemes and used for centralized networks, whereas we design distributed proportional fair scheduling (DPFS). In the proposed DPFS scheme, each receiver estimates channel condition and calculates independently its own priority with probabilistic manner, which can reduce excessive probing overhead required to gather the channel conditions of all receivers. We evaluate the proposed DPFS using extensive simulation and simulation results show that DPFS obtains up to 23% higher throughput than conventional scheduling schemes and has a flexibility to control the fairness and throughput by controlling the system parameter.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.710-715
• /
• 2019

We consider parameter estimation in distributed systems in which measurements at local nodes are quantized in a non-regular manner, where multiple codewords are mapped into a single local measurement. For the system with non-regular quantization, to ensure a perfect independent encoding at local nodes, a local measurement can be encoded into a set of a great number of codewords which are transmitted to a fusion node where estimation is conducted with enormous computational cost due to the large cardinality of the sets. In this paper, we propose an efficient estimation technique that can handle the non-regular quantized data by efficiently finding the feasible combination of codewords without searching all of the possible combinations. We conduct experiments to show that the proposed estimation performs well with respect to previous novel techniques with a reasonable complexity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.408-411
• /
• 1995

In this paper, we discuss the force control of flexible manipulators. Since the force control of flexible manipulators with planar one or two links using the distributed-parameter modeling has been the subject of a considerable number of publications until now, real time computations of the force control schemes are possible. But, application of those control schemes to multi-link spatial manipulators is fairly complicated. In this paper, we apply a concise hybrid position/force control scheme for a flexible manipulators. We use a lumped-parameter modeling for the flexible manipulators. The Hamilton's principle is applied to derive the equations of motion for the system and then, state-space model is obtained by the Lagrange's method. Finally, comparison of simulation results with experimental results is given to show the performance of our method.

• Structural Engineering and Mechanics
• /
• 제37권1호
• /
• pp.61-77
• /
• 2011

Static and dynamic responses of a completely free elastic beam resting on a two-parameter tensionless Pasternak foundation are investigated by assuming that the beam is symmetrically subjected to a uniformly distributed load and concentrated load at its middle. Governing equations of the problem are obtained and solved by paying attention on the boundary conditions of the problem including the concentrated edge foundation reaction in the case of complete contact and lift-off condition of the beam ina two-parameter foundation. The nonlinear governing equation of the problem is evaluated numerically by adopting an iterative procedure. Numerical results are presented in figures to demonstrate the non-linear behavior of the beam-foundation system for various values of the parameters of the problem comparatively by considering the static and dynamic loading cases.